1644 lines
No EOL
60 KiB
Text
1644 lines
No EOL
60 KiB
Text
# A3XX Electronic Centralised Aircraft Monitoring System
|
|
|
|
# Copyright (c) 2019 Jonathan Redpath (legoboyvdlp)
|
|
|
|
# props.nas:
|
|
|
|
var dualFailNode = props.globals.initNode("/ECAM/dual-failure-enabled", 0, "BOOL");
|
|
var phaseNode = props.globals.getNode("/ECAM/warning-phase", 1);
|
|
var leftMsgNode = props.globals.getNode("/ECAM/left-msg", 1);
|
|
var apWarn = props.globals.getNode("/it-autoflight/output/ap-warning", 1);
|
|
var athrWarn = props.globals.getNode("/it-autoflight/output/athr-warning", 1);
|
|
var emerGen = props.globals.getNode("/controls/electrical/switches/emer-gen", 1);
|
|
|
|
var fac1Node = props.globals.getNode("/controls/fctl/fac1", 1);
|
|
var state1Node = props.globals.getNode("/engines/engine[0]/state", 1);
|
|
var state2Node = props.globals.getNode("/engines/engine[1]/state", 1);
|
|
var wowNode = props.globals.getNode("/fdm/jsbsim/position/wow", 1);
|
|
var apu_rpm = props.globals.getNode("/systems/apu/rpm", 1);
|
|
var wing_pb = props.globals.getNode("/controls/switches/wing", 1);
|
|
var apumaster = props.globals.getNode("/controls/APU/master", 1);
|
|
var apu_bleedSw = props.globals.getNode("/controls/pneumatic/switches/bleedapu", 1);
|
|
var gear = props.globals.getNode("/gear/gear-pos-norm", 1);
|
|
var cutoff1 = props.globals.getNode("/controls/engines/engine[0]/cutoff-switch", 1);
|
|
var cutoff2 = props.globals.getNode("/controls/engines/engine[1]/cutoff-switch", 1);
|
|
var stallVoice = props.globals.initNode("/sim/sound/warnings/stall-voice", 0, "BOOL");
|
|
var engOpt = props.globals.getNode("/options/eng", 1);
|
|
|
|
# local variables
|
|
var phaseVar = nil;
|
|
var dualFailFACActive = 1;
|
|
var emerConfigFACActive = 1;
|
|
var gear_agl_cur = nil;
|
|
var messages_priority_3 = func {
|
|
phaseVar = phaseNode.getValue();
|
|
|
|
# Stall
|
|
# todo - altn law and emer cancel flipflops page 2440
|
|
if (phaseVar >= 5 and phaseVar <= 7 and (getprop("/fdm/jsbsim/fcs/slat-pos-deg") <= 15 and (getprop("/systems/navigation/adr/output/aoa-1") > 15 or getprop("/systems/navigation/adr/output/aoa-2") > 15 or getprop("/systems/navigation/adr/output/aoa-3") > 15)) or (getprop("/fdm/jsbsim/fcs/slat-pos-deg") > 15 and (getprop("/systems/navigation/adr/output/aoa-1") > 23 or getprop("/systems/navigation/adr/output/aoa-2") > 23 or getprop("/systems/navigation/adr/output/aoa-3") > 23))) {
|
|
stall.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(stall);
|
|
}
|
|
|
|
if (stall.active) {
|
|
stallVoice.setValue(1);
|
|
} else {
|
|
stallVoice.setValue(0);
|
|
}
|
|
|
|
if ((phaseVar == 1 or (phaseVar >= 5 and phaseVar <= 7)) and getprop("/systems/navigation/adr/output/overspeed")) {
|
|
overspeed.active = 1;
|
|
if (getprop("/systems/navigation/adr/computation/overspeed-vmo") or getprop("/systems/navigation/adr/computation/overspeed-mmo")) {
|
|
overspeedVMO.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(overspeedVMO);
|
|
}
|
|
|
|
if (getprop("/systems/navigation/adr/computation/overspeed-vle")) {
|
|
overspeedGear.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(overspeedGear);
|
|
}
|
|
|
|
if (getprop("/systems/navigation/adr/computation/overspeed-vfe")) {
|
|
overspeedFlap.active = 1;
|
|
overspeedFlap.msg = "-VFE................" ~ (systems.ADIRSnew.overspeedVFE.getValue() - 4);
|
|
} else {
|
|
ECAM_controller.warningReset(overspeedFlap);
|
|
overspeedFlap.msg = "-VFE................XXX";
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(overspeed);
|
|
ECAM_controller.warningReset(overspeedVMO);
|
|
ECAM_controller.warningReset(overspeedGear);
|
|
ECAM_controller.warningReset(overspeedFlap);
|
|
overspeedFlap.msg = "-VFE................XXX";
|
|
}
|
|
|
|
# FCTL FLAPS NOT ZERO
|
|
if ((flap_not_zero.clearFlag == 0) and phaseVar == 6 and getprop("/controls/flight/flap-lever") != 0 and getprop("/instrumentation/altimeter/indicated-altitude-ft") > 22000) {
|
|
flap_not_zero.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(flap_not_zero);
|
|
}
|
|
|
|
# ENG DUAL FAIL
|
|
|
|
if (phaseVar >= 5 and phaseVar <= 7 and dualFailNode.getBoolValue() and dualFail.clearFlag == 0) {
|
|
dualFail.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFail);
|
|
|
|
dualFailFACActive = 1; # reset FAC local variable
|
|
}
|
|
|
|
if (dualFail.active == 1) {
|
|
if (getprop("/controls/engines/engine-start-switch") != 2 and dualFailModeSel.clearFlag == 0) {
|
|
dualFailModeSel.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailModeSel);
|
|
}
|
|
|
|
if (getprop("/fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("/fdm/jsbsim/fcs/throttle-lever[1]") > 0.01 and dualFailLevers.clearFlag == 0) {
|
|
dualFailLevers.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailLevers);
|
|
}
|
|
|
|
if (engOpt.getValue() == "IAE" and dualFailRelightSPD.clearFlag == 0) {
|
|
dualFailRelightSPD.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailRelightSPD);
|
|
}
|
|
|
|
if (engOpt.getValue() != "IAE" and dualFailRelightSPDCFM.clearFlag == 0) {
|
|
dualFailRelightSPDCFM.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailRelightSPDCFM);
|
|
}
|
|
|
|
if (emerGen.getValue() == 0 and dualFailElec.clearFlag == 0) {
|
|
dualFailElec.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailElec);
|
|
}
|
|
|
|
if (dualFailRadio.clearFlag == 0) {
|
|
dualFailRadio.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailRadio);
|
|
}
|
|
|
|
if (dualFailFACActive == 1 and dualFailFAC.clearFlag == 0) {
|
|
dualFailFAC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailFAC);
|
|
}
|
|
|
|
|
|
if (dualFailMasters.clearFlag == 0) {
|
|
dualFailRelight.active = 1; # assumption
|
|
dualFailMasters.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailRelight);
|
|
ECAM_controller.warningReset(dualFailMasters);
|
|
}
|
|
|
|
if (dualFailSPDGD.clearFlag == 0) {
|
|
dualFailSuccess.active = 1; # assumption
|
|
dualFailSPDGD.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailSuccess);
|
|
ECAM_controller.warningReset(dualFailSPDGD);
|
|
}
|
|
|
|
if (dualFailAPU.clearFlag == 0) {
|
|
dualFailAPU.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailAPU);
|
|
}
|
|
|
|
if (dualFailAPUwing.clearFlag == 0 and apu_rpm.getValue() > 94.9 and wing_pb.getBoolValue()) {
|
|
dualFailAPUwing.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailAPUwing);
|
|
}
|
|
|
|
if (dualFailAPUbleed.clearFlag == 0 and apu_rpm.getValue() > 94.9 and !apu_bleedSw.getBoolValue()) {
|
|
dualFailAPUbleed.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailAPUbleed);
|
|
}
|
|
|
|
if (dualFailMastersAPU.clearFlag == 0) {
|
|
dualFailMastersAPU.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailMastersAPU);
|
|
}
|
|
|
|
if (dualFailflap.clearFlag == 0) {
|
|
dualFailAPPR.active = 1; # assumption
|
|
dualFailflap.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailAPPR);
|
|
ECAM_controller.warningReset(dualFailflap);
|
|
}
|
|
|
|
if (dualFailcabin.clearFlag == 0) {
|
|
dualFailcabin.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailcabin);
|
|
}
|
|
|
|
if (dualFailrudd.clearFlag == 0) {
|
|
dualFailrudd.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailrudd);
|
|
}
|
|
|
|
if (dualFailgear.clearFlag == 0 and gear.getValue() != 1) {
|
|
dualFail5000.active = 1; # according to doc
|
|
dualFailgear.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailgear);
|
|
ECAM_controller.warningReset(dualFail5000);
|
|
}
|
|
|
|
if (dualFailfinalspeed.clearFlag == 0) {
|
|
dualFailfinalspeed.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailfinalspeed);
|
|
}
|
|
|
|
if (dualFailmasteroff.clearFlag == 0 and (!cutoff1.getBoolValue() or !cutoff2.getBoolValue())) {
|
|
dualFailmasteroff.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailmasteroff);
|
|
}
|
|
|
|
if (dualFailapuoff.clearFlag == 0 and apumaster.getBoolValue()) {
|
|
dualFailapuoff.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailapuoff);
|
|
}
|
|
|
|
if (dualFailevac.clearFlag == 0) {
|
|
dualFailevac.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailevac);
|
|
}
|
|
|
|
if (dualFailbatt.clearFlag == 0) { # elec power lost when batt goes off anyway I guess
|
|
dualFailbatt.active = 1;
|
|
dualFailtouch.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailbatt);
|
|
ECAM_controller.warningReset(dualFailtouch);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(dualFailModeSel);
|
|
ECAM_controller.warningReset(dualFailLevers);
|
|
ECAM_controller.warningReset(dualFailRelightSPD);
|
|
ECAM_controller.warningReset(dualFailRelightSPDCFM);
|
|
ECAM_controller.warningReset(dualFailElec);
|
|
ECAM_controller.warningReset(dualFailRadio);
|
|
ECAM_controller.warningReset(dualFailFAC);
|
|
ECAM_controller.warningReset(dualFailRelight);
|
|
ECAM_controller.warningReset(dualFailMasters);
|
|
ECAM_controller.warningReset(dualFailSuccess);
|
|
ECAM_controller.warningReset(dualFailSPDGD);
|
|
ECAM_controller.warningReset(dualFailAPU);
|
|
ECAM_controller.warningReset(dualFailAPUwing);
|
|
ECAM_controller.warningReset(dualFailAPUbleed);
|
|
ECAM_controller.warningReset(dualFailMastersAPU);
|
|
ECAM_controller.warningReset(dualFailAPPR);
|
|
ECAM_controller.warningReset(dualFailflap);
|
|
ECAM_controller.warningReset(dualFailcabin);
|
|
ECAM_controller.warningReset(dualFailrudd);
|
|
ECAM_controller.warningReset(dualFailgear);
|
|
ECAM_controller.warningReset(dualFail5000);
|
|
ECAM_controller.warningReset(dualFailfinalspeed);
|
|
ECAM_controller.warningReset(dualFailmasteroff);
|
|
ECAM_controller.warningReset(dualFailapuoff);
|
|
ECAM_controller.warningReset(dualFailevac);
|
|
ECAM_controller.warningReset(dualFailbatt);
|
|
ECAM_controller.warningReset(dualFailtouch);
|
|
}
|
|
|
|
# ENG FIRE
|
|
if ((eng1FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine1/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) or (eng1FireGnevacBat.clearFlag == 0 and getprop("/systems/fire/engine1/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7))) {
|
|
eng1Fire.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1Fire);
|
|
}
|
|
|
|
if ((eng2FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine2/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) or (eng2FireGnevacBat.clearFlag == 0 and getprop("/systems/fire/engine2/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7))) {
|
|
eng2Fire.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2Fire);
|
|
}
|
|
|
|
if (apuFireMaster.clearFlag == 0 and getprop("/systems/fire/apu/warning-active")) {
|
|
apuFire.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFire);
|
|
}
|
|
|
|
if (eng1Fire.active == 1) {
|
|
if (phaseVar >= 5 and phaseVar <= 7) {
|
|
if (eng1FireFllever.clearFlag == 0 and getprop("/fdm/jsbsim/fcs/throttle-lever[0]") > 0.01) {
|
|
eng1FireFllever.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFllever);
|
|
}
|
|
|
|
if (eng1FireFlmaster.clearFlag == 0 and getprop("/controls/engines/engine[0]/cutoff-switch") == 0) {
|
|
eng1FireFlmaster.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlmaster);
|
|
}
|
|
|
|
if (eng1FireFlPB.clearFlag == 0 and getprop("/controls/engines/engine[0]/fire-btn") == 0) {
|
|
eng1FireFlPB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlPB);
|
|
}
|
|
|
|
if (getprop("/systems/fire/engine1/agent1-timer") != 0 and getprop("/systems/fire/engine1/agent1-timer") != 99) {
|
|
eng1FireFlAgent1Timer.msg = " -AGENT AFT " ~ getprop("/systems/fire/engine1/agent1-timer") ~ " S...DISCH";
|
|
}
|
|
|
|
if (eng1FireFlAgent1.clearFlag == 0 and getprop("/controls/engines/engine[0]/fire-btn") == 1 and !getprop("/systems/fire/engine1/disch1") and getprop("/systems/fire/engine1/agent1-timer") != 0 and getprop("/systems/fire/engine1/agent1-timer") != 99) {
|
|
eng1FireFlAgent1Timer.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlAgent1Timer);
|
|
}
|
|
|
|
if (eng1FireFlAgent1.clearFlag == 0 and !getprop("/systems/fire/engine1/disch1") and (getprop("/systems/fire/engine1/agent1-timer") == 0 or getprop("/systems/fire/engine1/agent1-timer") == 99)) {
|
|
eng1FireFlAgent1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlAgent1);
|
|
}
|
|
|
|
if (eng1FireFlATC.clearFlag == 0) {
|
|
eng1FireFlATC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlATC);
|
|
}
|
|
|
|
if (getprop("/systems/fire/engine1/agent2-timer") != 0 and getprop("/systems/fire/engine1/agent2-timer") != 99) {
|
|
eng1FireFl30Sec.msg = "•IF FIRE AFTER " ~ getprop("/systems/fire/engine1/agent2-timer") ~ " S:";
|
|
}
|
|
|
|
if (eng1FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine1/disch1") and !getprop("/systems/fire/engine1/disch2") and getprop("/systems/fire/engine1/agent2-timer") > 0) {
|
|
eng1FireFl30Sec.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFl30Sec);
|
|
}
|
|
|
|
if (eng1FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine1/disch1") and !getprop("/systems/fire/engine1/disch2")) {
|
|
eng1FireFlAgent2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFlAgent2);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFllever);
|
|
ECAM_controller.warningReset(eng1FireFlmaster);
|
|
ECAM_controller.warningReset(eng1FireFlPB);
|
|
ECAM_controller.warningReset(eng1FireFlAgent1);
|
|
ECAM_controller.warningReset(eng1FireFlATC);
|
|
ECAM_controller.warningReset(eng1FireFl30Sec);
|
|
ECAM_controller.warningReset(eng1FireFlAgent2);
|
|
}
|
|
|
|
if (phaseVar < 5 or phaseVar > 7) {
|
|
if (eng1FireGnlever.clearFlag == 0 and getprop("/fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("/fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
|
|
eng1FireGnlever.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnlever);
|
|
}
|
|
|
|
if (eng1FireGnparkbrk.clearFlag == 0 and getprop("/controls/gear/brake-parking") == 0) {
|
|
eng1FireGnstopped.active = 1;
|
|
eng1FireGnparkbrk.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnstopped);
|
|
ECAM_controller.warningReset(eng1FireGnparkbrk);
|
|
}
|
|
|
|
if (eng1FireGnmaster.clearFlag == 0 and getprop("/controls/engines/engine[0]/cutoff-switch") == 0) {
|
|
eng1FireGnmaster.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnmaster);
|
|
}
|
|
|
|
if (eng1FireGnPB.clearFlag == 0 and getprop("/controls/engines/engine[0]/fire-btn") == 0) {
|
|
eng1FireGnPB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnPB);
|
|
}
|
|
|
|
if (eng1FireGnAgent1.clearFlag == 0 and !getprop("/systems/fire/engine1/disch1")) {
|
|
eng1FireGnAgent1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnAgent1);
|
|
}
|
|
|
|
if (eng1FireGnAgent2.clearFlag == 0 and !getprop("/systems/fire/engine1/disch2")) {
|
|
eng1FireGnAgent2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnAgent2);
|
|
}
|
|
|
|
if (eng1FireGnmaster2.clearFlag == 0 and getprop("/controls/engines/engine[1]/cutoff-switch") == 0) {
|
|
eng1FireGnmaster2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnmaster2);
|
|
}
|
|
|
|
if (eng1FireGnATC.clearFlag == 0) {
|
|
eng1FireGnATC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnATC);
|
|
}
|
|
|
|
if (eng1FireGncrew.clearFlag == 0) {
|
|
eng1FireGncrew.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGncrew);
|
|
}
|
|
|
|
if (eng1FireGnevacSw.clearFlag == 0) {
|
|
eng1FireGnevac.active = 1;
|
|
eng1FireGnevacSw.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnevac);
|
|
ECAM_controller.warningReset(eng1FireGnevacSw);
|
|
}
|
|
|
|
if (eng1FireGnevacApu.clearFlag == 0 and getprop("/controls/APU/master") and getprop("/systems/apu/rpm") > 99) {
|
|
eng1FireGnevacApu.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnevacApu);
|
|
}
|
|
|
|
if (eng1FireGnevacBat.clearFlag == 0 and (systems.ELEC.Switch.bat1.getValue() or systems.ELEC.Switch.bat2.getValue())) {
|
|
eng1FireGnevacBat.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnevacBat);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireGnlever);
|
|
ECAM_controller.warningReset(eng1FireGnstopped);
|
|
ECAM_controller.warningReset(eng1FireGnparkbrk);
|
|
ECAM_controller.warningReset(eng1FireGnmaster);
|
|
ECAM_controller.warningReset(eng1FireGnPB);
|
|
ECAM_controller.warningReset(eng1FireGnAgent1);
|
|
ECAM_controller.warningReset(eng1FireGnAgent2);
|
|
ECAM_controller.warningReset(eng1FireGnmaster2);
|
|
ECAM_controller.warningReset(eng1FireGnATC);
|
|
ECAM_controller.warningReset(eng1FireGncrew);
|
|
ECAM_controller.warningReset(eng1FireGnevac);
|
|
ECAM_controller.warningReset(eng1FireGnevacSw);
|
|
ECAM_controller.warningReset(eng1FireGnevacApu);
|
|
ECAM_controller.warningReset(eng1FireGnevacBat);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireFllever);
|
|
ECAM_controller.warningReset(eng1FireFlmaster);
|
|
ECAM_controller.warningReset(eng1FireFlPB);
|
|
ECAM_controller.warningReset(eng1FireFlAgent1);
|
|
ECAM_controller.warningReset(eng1FireFlATC);
|
|
ECAM_controller.warningReset(eng1FireFl30Sec);
|
|
ECAM_controller.warningReset(eng1FireFlAgent2);
|
|
ECAM_controller.warningReset(eng1FireGnlever);
|
|
ECAM_controller.warningReset(eng1FireGnstopped);
|
|
ECAM_controller.warningReset(eng1FireGnparkbrk);
|
|
ECAM_controller.warningReset(eng1FireGnmaster);
|
|
ECAM_controller.warningReset(eng1FireGnPB);
|
|
ECAM_controller.warningReset(eng1FireGnAgent1);
|
|
ECAM_controller.warningReset(eng1FireGnAgent2);
|
|
ECAM_controller.warningReset(eng1FireGnmaster2);
|
|
ECAM_controller.warningReset(eng1FireGnATC);
|
|
ECAM_controller.warningReset(eng1FireGncrew);
|
|
ECAM_controller.warningReset(eng1FireGnevac);
|
|
ECAM_controller.warningReset(eng1FireGnevacSw);
|
|
ECAM_controller.warningReset(eng1FireGnevacApu);
|
|
ECAM_controller.warningReset(eng1FireGnevacBat);
|
|
}
|
|
|
|
if (eng2Fire.active == 1) {
|
|
if (phaseVar >= 5 and phaseVar <= 7) {
|
|
if (eng2FireFllever.clearFlag == 0 and getprop("/fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
|
|
eng2FireFllever.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFllever);
|
|
}
|
|
|
|
if (eng2FireFlmaster.clearFlag == 0 and getprop("/controls/engines/engine[1]/cutoff-switch") == 0) {
|
|
eng2FireFlmaster.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlmaster);
|
|
}
|
|
|
|
if (eng2FireFlPB.clearFlag == 0 and getprop("/controls/engines/engine[1]/fire-btn") == 0) {
|
|
eng2FireFlPB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlPB);
|
|
}
|
|
|
|
if (getprop("/systems/fire/engine2/agent1-timer") != 0 and getprop("/systems/fire/engine2/agent1-timer") != 99) {
|
|
eng2FireFlAgent1Timer.msg = " -AGENT AFT " ~ getprop("/systems/fire/engine2/agent1-timer") ~ " S...DISCH";
|
|
}
|
|
|
|
if (eng2FireFlAgent1.clearFlag == 0 and getprop("/controls/engines/engine[1]/fire-btn") == 1 and !getprop("/systems/fire/engine2/disch1") and getprop("/systems/fire/engine2agent1-timer") != 0 and getprop("/systems/fire/engine2/agent1-timer") != 99) {
|
|
eng2FireFlAgent1Timer.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlAgent1Timer);
|
|
}
|
|
|
|
if (eng2FireFlAgent1.clearFlag == 0 and !getprop("/systems/fire/engine2/disch1") and (getprop("/systems/fire/engine2/agent1-timer") == 0 or getprop("/systems/fire/engine2/agent1-timer") == 99)) {
|
|
eng2FireFlAgent1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlAgent1);
|
|
}
|
|
|
|
if (eng2FireFlATC.clearFlag == 0) {
|
|
eng2FireFlATC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlATC);
|
|
}
|
|
|
|
if (getprop("/systems/fire/engine2/agent2-timer") != 0 and getprop("/systems/fire/engine2/agent2-timer") != 99) {
|
|
eng2FireFl30Sec.msg = "•IF FIRE AFTER " ~ getprop("/systems/fire/engine2/agent2-timer") ~ " S:";
|
|
}
|
|
|
|
if (eng2FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine2/disch1") and !getprop("/systems/fire/engine2/disch2") and getprop("/systems/fire/engine2/agent2-timer") > 0) {
|
|
eng2FireFl30Sec.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFl30Sec);
|
|
}
|
|
|
|
if (eng2FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine2/disch1") and !getprop("/systems/fire/engine2/disch2")) {
|
|
eng2FireFlAgent2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFlAgent2);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFllever);
|
|
ECAM_controller.warningReset(eng2FireFlmaster);
|
|
ECAM_controller.warningReset(eng2FireFlPB);
|
|
ECAM_controller.warningReset(eng2FireFlAgent1);
|
|
ECAM_controller.warningReset(eng2FireFlATC);
|
|
ECAM_controller.warningReset(eng2FireFl30Sec);
|
|
ECAM_controller.warningReset(eng2FireFlAgent2);
|
|
}
|
|
|
|
if (phaseVar < 5 or phaseVar > 7) {
|
|
if (eng2FireGnlever.clearFlag == 0 and getprop("/fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("/fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
|
|
eng2FireGnlever.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnlever);
|
|
}
|
|
|
|
if (eng2FireGnparkbrk.clearFlag == 0 and getprop("/controls/gear/brake-parking") == 0) {
|
|
eng2FireGnstopped.active = 1;
|
|
eng2FireGnparkbrk.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnstopped);
|
|
ECAM_controller.warningReset(eng2FireGnparkbrk);
|
|
}
|
|
|
|
if (eng2FireGnmaster.clearFlag == 0 and getprop("/controls/engines/engine[1]/cutoff-switch") == 0) {
|
|
eng2FireGnmaster.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnmaster);
|
|
}
|
|
|
|
if (eng2FireGnPB.clearFlag == 0 and getprop("/controls/engines/engine[1]/fire-btn") == 0) {
|
|
eng2FireGnPB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnPB);
|
|
}
|
|
|
|
if (eng2FireGnAgent1.clearFlag == 0 and !getprop("/systems/fire/engine2/disch1")) {
|
|
eng2FireGnAgent1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnAgent1);
|
|
}
|
|
|
|
if (eng2FireGnAgent2.clearFlag == 0 and !getprop("/systems/fire/engine2/disch2")) {
|
|
eng2FireGnAgent2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnAgent2);
|
|
}
|
|
|
|
if (eng2FireGnmaster2.clearFlag == 0 and getprop("/controls/engines/engine[0]/cutoff-switch") == 0) {
|
|
eng2FireGnmaster2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnmaster2);
|
|
}
|
|
|
|
if (eng2FireGnATC.clearFlag == 0) {
|
|
eng2FireGnATC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnATC);
|
|
}
|
|
|
|
if (eng2FireGncrew.clearFlag == 0) {
|
|
eng2FireGncrew.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGncrew);
|
|
}
|
|
|
|
if (eng2FireGnevacSw.clearFlag == 0) {
|
|
eng2FireGnevac.active = 1;
|
|
eng2FireGnevacSw.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnevac);
|
|
ECAM_controller.warningReset(eng2FireGnevacSw);
|
|
}
|
|
|
|
if (eng2FireGnevacApu.clearFlag == 0 and getprop("/controls/APU/master") and getprop("/systems/apu/rpm") > 99) {
|
|
eng2FireGnevacApu.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnevacApu);
|
|
}
|
|
|
|
if (eng2FireGnevacBat.clearFlag == 0 and (systems.ELEC.Switch.bat1.getValue() or systems.ELEC.Switch.bat2.getValue())) {
|
|
eng2FireGnevacBat.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnevacBat);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireGnlever);
|
|
ECAM_controller.warningReset(eng2FireGnstopped);
|
|
ECAM_controller.warningReset(eng2FireGnparkbrk);
|
|
ECAM_controller.warningReset(eng2FireGnmaster);
|
|
ECAM_controller.warningReset(eng2FireGnPB);
|
|
ECAM_controller.warningReset(eng2FireGnAgent1);
|
|
ECAM_controller.warningReset(eng2FireGnAgent2);
|
|
ECAM_controller.warningReset(eng2FireGnmaster2);
|
|
ECAM_controller.warningReset(eng2FireGnATC);
|
|
ECAM_controller.warningReset(eng2FireGncrew);
|
|
ECAM_controller.warningReset(eng2FireGnevac);
|
|
ECAM_controller.warningReset(eng2FireGnevacSw);
|
|
ECAM_controller.warningReset(eng2FireGnevacApu);
|
|
ECAM_controller.warningReset(eng2FireGnevacBat);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireFllever);
|
|
ECAM_controller.warningReset(eng2FireFlmaster);
|
|
ECAM_controller.warningReset(eng2FireFlPB);
|
|
ECAM_controller.warningReset(eng2FireFlAgent1);
|
|
ECAM_controller.warningReset(eng2FireFlATC);
|
|
ECAM_controller.warningReset(eng2FireFl30Sec);
|
|
ECAM_controller.warningReset(eng2FireFlAgent2);
|
|
ECAM_controller.warningReset(eng2FireGnlever);
|
|
ECAM_controller.warningReset(eng2FireGnstopped);
|
|
ECAM_controller.warningReset(eng2FireGnparkbrk);
|
|
ECAM_controller.warningReset(eng2FireGnmaster);
|
|
ECAM_controller.warningReset(eng2FireGnPB);
|
|
ECAM_controller.warningReset(eng2FireGnAgent1);
|
|
ECAM_controller.warningReset(eng2FireGnAgent2);
|
|
ECAM_controller.warningReset(eng2FireGnmaster2);
|
|
ECAM_controller.warningReset(eng2FireGnATC);
|
|
ECAM_controller.warningReset(eng2FireGncrew);
|
|
ECAM_controller.warningReset(eng2FireGnevac);
|
|
ECAM_controller.warningReset(eng2FireGnevacSw);
|
|
ECAM_controller.warningReset(eng2FireGnevacApu);
|
|
ECAM_controller.warningReset(eng2FireGnevacBat);
|
|
}
|
|
|
|
# APU Fire
|
|
if (apuFire.active == 1) {
|
|
if (apuFirePB.clearFlag == 0 and !getprop("/controls/APU/fire-btn")) {
|
|
apuFirePB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFirePB);
|
|
}
|
|
|
|
if (getprop("/systems/fire/apu/agent-timer") != 0 and getprop("/systems/fire/apu/agent-timer") != 99) {
|
|
apuFireAgentTimer.msg = " -AGENT AFT " ~ getprop("/systems/fire/apu/agent-timer") ~ " S...DISCH";
|
|
}
|
|
|
|
if (apuFireAgent.clearFlag == 0 and getprop("/controls/APU/fire-btn") and !getprop("/systems/fire/apu/disch") and getprop("/systems/fire/apu/agent-timer") != 0) {
|
|
apuFireAgentTimer.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFireAgentTimer);
|
|
}
|
|
|
|
if (apuFireAgent.clearFlag == 0 and getprop("/controls/APU/fire-btn") and !getprop("/systems/fire/apu/disch") and getprop("/systems/fire/apu/agent-timer") == 0) {
|
|
apuFireAgent.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFireAgent);
|
|
}
|
|
|
|
if (apuFireMaster.clearFlag == 0 and getprop("/controls/APU/master")) {
|
|
apuFireMaster.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFireMaster);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(apuFirePB);
|
|
ECAM_controller.warningReset(apuFireAgentTimer);
|
|
ECAM_controller.warningReset(apuFireAgent);
|
|
ECAM_controller.warningReset(apuFireMaster);
|
|
}
|
|
|
|
# CONFIG
|
|
if ((slats_config.clearFlag == 0) and (getprop("/controls/flight/flap-lever") == 0 or getprop("/controls/flight/flap-lever")) == 4 and phaseVar >= 3 and phaseVar <= 4) {
|
|
slats_config.active = 1;
|
|
slats_config_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(slats_config);
|
|
ECAM_controller.warningReset(slats_config_1);
|
|
}
|
|
|
|
if ((flaps_config.clearFlag == 0) and (getprop("/controls/flight/flap-lever") == 0 or getprop("/controls/flight/flap-lever") == 4) and phaseVar >= 3 and phaseVar <= 4) {
|
|
flaps_config.active = 1;
|
|
flaps_config_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(flaps_config);
|
|
ECAM_controller.warningReset(flaps_config_1);
|
|
}
|
|
|
|
if ((spd_brk_config.clearFlag == 0) and getprop("/controls/flight/speedbrake") != 0 and phaseVar >= 3 and phaseVar <= 4) {
|
|
spd_brk_config.active = 1;
|
|
spd_brk_config_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(spd_brk_config);
|
|
ECAM_controller.warningReset(spd_brk_config_1);
|
|
}
|
|
|
|
if ((pitch_trim_config.clearFlag == 0) and (getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") > 1.75 or getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") < -3.65) and phaseVar >= 3 and phaseVar <= 4) {
|
|
pitch_trim_config.active = 1;
|
|
pitch_trim_config_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(pitch_trim_config);
|
|
ECAM_controller.warningReset(pitch_trim_config_1);
|
|
}
|
|
|
|
if ((rud_trim_config.clearFlag == 0) and (getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") < -3.55 or getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") > 3.55) and phaseVar >= 3 and phaseVar <= 4) {
|
|
rud_trim_config.active = 1;
|
|
rud_trim_config_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(rud_trim_config);
|
|
ECAM_controller.warningReset(rud_trim_config_1);
|
|
}
|
|
|
|
if ((park_brk_config.clearFlag == 0) and getprop("/controls/gear/brake-parking") == 1 and phaseVar >= 3 and phaseVar <= 4) {
|
|
park_brk_config.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(park_brk_config);
|
|
}
|
|
|
|
# AUTOFLT
|
|
if ((ap_offw.clearFlag == 0) and apWarn.getValue() == 2) {
|
|
ap_offw.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(ap_offw);
|
|
if (getprop("/it-autoflight/output/ap-warning") == 2) {
|
|
setprop("/it-autoflight/output/ap-warning", 0);
|
|
setprop("/ECAM/Lower/light/clr", 0);
|
|
setprop("/ECAM/warnings/master-warning-light", 0);
|
|
}
|
|
}
|
|
|
|
if ((athr_lock.clearFlag == 0) and phaseVar >= 5 and phaseVar <= 7 and getprop("/systems/thrust/thr-locked-alert") == 1) {
|
|
if (getprop("/systems/thrust/thr-locked-flash") == 0) {
|
|
athr_lock.msg = " ";
|
|
} else {
|
|
athr_lock.msg = msgSave
|
|
}
|
|
athr_lock.active = 1;
|
|
athr_lock_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(athr_lock);
|
|
ECAM_controller.warningReset(athr_lock_1);
|
|
}
|
|
|
|
if ((athr_offw.clearFlag == 0) and athrWarn.getValue() == 2 and phaseVar != 4 and phaseVar != 8 and phaseVar != 10) {
|
|
athr_offw.active = 1;
|
|
athr_offw_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(athr_offw);
|
|
ECAM_controller.warningReset(athr_offw_1);
|
|
if (getprop("/it-autoflight/output/athr-warning") == 2) {
|
|
setprop("/it-autoflight/output/athr-warning", 0);
|
|
setprop("/ECAM/Lower/light/clr", 0);
|
|
setprop("/ECAM/warnings/master-caution-light", 0);
|
|
}
|
|
}
|
|
|
|
if ((athr_lim.clearFlag == 0) and getprop("/it-autoflight/output/athr") == 1 and ((getprop("/systems/thrust/eng-out") != 1 and (getprop("/systems/thrust/state1") == "MAN" or getprop("/systems/thrust/state2") == "MAN")) or (getprop("/systems/thrust/eng-out") == 1 and (getprop("/systems/thrust/state1") == "MAN" or getprop("/systems/thrust/state2") == "MAN" or (getprop("/systems/thrust/state1") == "MAN THR" and getprop("/controls/engines/engine[0]/throttle-pos") <= 0.83) or (getprop("/systems/thrust/state2") == "MAN THR" and getprop("/controls/engines/engine[0]/throttle-pos") <= 0.83)))) and (phaseVar >= 5 and phaseVar <= 7)) {
|
|
athr_lim.active = 1;
|
|
athr_lim_1.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(athr_lim);
|
|
ECAM_controller.warningReset(athr_lim_1);
|
|
}
|
|
|
|
if (!systems.cargoTestBtn.getBoolValue()) {
|
|
if (cargoSmokeFwd.clearFlag == 0 and systems.fwdCargoFireWarn.getBoolValue() and (phaseVar <= 3 or phaseVar >= 9 or phaseVar == 6)) {
|
|
cargoSmokeFwd.active = 1;
|
|
} elsif (cargoSmokeFwd.clearFlag == 1 or systems.cargoTestBtnOff.getBoolValue()) {
|
|
ECAM_controller.warningReset(cargoSmokeFwd);
|
|
cargoSmokeFwd.hasSubmsg = 1;
|
|
}
|
|
|
|
if (cargoSmokeFwdAgent.clearFlag == 0 and cargoSmokeFwd.active == 1 and !getprop("/systems/fire/cargo/disch")) {
|
|
cargoSmokeFwdAgent.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(cargoSmokeFwdAgent);
|
|
cargoSmokeFwd.hasSubmsg = 0;
|
|
}
|
|
|
|
if (cargoSmokeAft.clearFlag == 0 and systems.aftCargoFireWarn.getBoolValue() and (phaseVar <= 3 or phaseVar >= 9 or phaseVar == 6)) {
|
|
cargoSmokeAft.active = 1;
|
|
} elsif (cargoSmokeAft.clearFlag == 1 or systems.cargoTestBtnOff.getBoolValue()) {
|
|
ECAM_controller.warningReset(cargoSmokeAft);
|
|
cargoSmokeAft.hasSubmsg = 1;
|
|
systems.cargoTestBtnOff.setBoolValue(0);
|
|
}
|
|
|
|
if (cargoSmokeAftAgent.clearFlag == 0 and cargoSmokeAft.active == 1 and !getprop("/systems/fire/cargo/disch")) {
|
|
cargoSmokeAftAgent.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(cargoSmokeAftAgent);
|
|
cargoSmokeAft.hasSubmsg = 0;
|
|
}
|
|
} else {
|
|
if (systems.aftCargoFireWarn.getBoolValue()) {
|
|
cargoSmokeFwd.active = 1;
|
|
cargoSmokeFwdAgent.active = 1;
|
|
cargoSmokeAft.active = 1;
|
|
cargoSmokeAftAgent.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(cargoSmokeFwd);
|
|
ECAM_controller.warningReset(cargoSmokeFwdAgent);
|
|
ECAM_controller.warningReset(cargoSmokeAft);
|
|
ECAM_controller.warningReset(cargoSmokeAftAgent);
|
|
}
|
|
}
|
|
|
|
# ESS on BAT
|
|
if ((!gear.getValue() or !getprop("/controls/gear/gear-down")) and getprop("/systems/electrical/some-electric-thingie/static-inverter-timer") == 1 and phaseVar >= 5 and phaseVar <= 7) {
|
|
essBusOnBat.active = 1;
|
|
essBusOnBatLGUplock.active = 1;
|
|
essBusOnBatManOn.active = 1;
|
|
essBusOnBatRetract.active = 1;
|
|
essBusOnBatMinSpeed.active = 1;
|
|
essBusOnBatLGCB.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(essBusOnBat);
|
|
ECAM_controller.warningReset(essBusOnBatLGUplock);
|
|
ECAM_controller.warningReset(essBusOnBatManOn);
|
|
ECAM_controller.warningReset(essBusOnBatRetract);
|
|
ECAM_controller.warningReset(essBusOnBatMinSpeed);
|
|
ECAM_controller.warningReset(essBusOnBatLGCB);
|
|
}
|
|
|
|
# EMER CONFIG
|
|
if (getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and !dualFailNode.getBoolValue() and phaseVar != 4 and phaseVar != 8 and emerconfig.clearFlag == 0) {
|
|
emerconfig.active = 1;
|
|
|
|
if (getprop("/systems/hydraulic/sources/rat/position") != 0 and emerconfigMinRat.clearFlag == 0) {
|
|
emerconfigMinRat.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigMinRat);
|
|
}
|
|
|
|
if (!(getprop("/systems/electrical/some-electric-thingie/generator-1-reset") and getprop("/systems/electrical/some-electric-thingie/generator-2-reset")) and emerconfigGen.clearFlag == 0) {
|
|
emerconfigGen.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigGen);
|
|
}
|
|
|
|
if (!(getprop("/systems/electrical/some-electric-thingie/generator-1-reset-bustie") and getprop("/systems/electrical/some-electric-thingie/generator-2-reset-bustie")) and emerconfigGen2.clearFlag == 0) {
|
|
emerconfigGen2.active = 1;
|
|
if (getprop("/controls/electrical/switches/bus-tie")) {
|
|
emerconfigBusTie.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigBusTie);
|
|
}
|
|
emerconfigGen3.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigGen2);
|
|
ECAM_controller.warningReset(emerconfigBusTie);
|
|
ECAM_controller.warningReset(emerconfigGen3);
|
|
}
|
|
|
|
if (getprop("/systems/electrical/relay/emer-glc/contact-pos") == 0 and emerconfigManOn.clearFlag == 0) {
|
|
emerconfigManOn.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigManOn);
|
|
}
|
|
|
|
if (getprop("/controls/engines/engine-start-switch") != 2 and emerconfigEngMode.clearFlag == 0) {
|
|
emerconfigEngMode.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigEngMode);
|
|
}
|
|
|
|
if (emerconfigRadio.clearFlag == 0) {
|
|
emerconfigRadio.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigRadio);
|
|
}
|
|
|
|
if (emerconfigIcing.clearFlag == 0) {
|
|
emerconfigIcing.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigIcing);
|
|
}
|
|
|
|
if (emerconfigFuelG.clearFlag == 0) {
|
|
emerconfigFuelG.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigFuelG);
|
|
}
|
|
|
|
if (emerconfigFuelG2.clearFlag == 0) {
|
|
emerconfigFuelG2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigFuelG2);
|
|
}
|
|
|
|
if (emerConfigFACActive == 1 and emerconfigFAC.clearFlag == 0) {
|
|
emerconfigFAC.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigFAC);
|
|
}
|
|
|
|
if (!getprop("/controls/electrical/switches/bus-tie") and emerconfigBusTie2.clearFlag == 0) {
|
|
emerconfigBusTie2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigBusTie2);
|
|
}
|
|
|
|
if (emerconfigAPU.clearFlag == 0) {
|
|
emerconfigAPU.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigAPU);
|
|
}
|
|
|
|
if (emerconfigVent.clearFlag == 0) {
|
|
emerconfigVent.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigVent);
|
|
}
|
|
|
|
if (emerconfigAltn.clearFlag == 0) {
|
|
emerconfigAltn.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigAltn);
|
|
}
|
|
|
|
if (emerconfigProt.clearFlag == 0) {
|
|
emerconfigProt.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigProt);
|
|
}
|
|
|
|
if (emerconfigMaxSpeed.clearFlag == 0) {
|
|
emerconfigMaxSpeed.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfigMaxSpeed);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(emerconfig);
|
|
ECAM_controller.warningReset(emerconfigMinRat);
|
|
ECAM_controller.warningReset(emerconfigGen);
|
|
ECAM_controller.warningReset(emerconfigGen2);
|
|
ECAM_controller.warningReset(emerconfigBusTie);
|
|
ECAM_controller.warningReset(emerconfigGen3);
|
|
ECAM_controller.warningReset(emerconfigManOn);
|
|
ECAM_controller.warningReset(emerconfigEngMode);
|
|
ECAM_controller.warningReset(emerconfigRadio);
|
|
ECAM_controller.warningReset(emerconfigIcing);
|
|
ECAM_controller.warningReset(emerconfigFuelG);
|
|
ECAM_controller.warningReset(emerconfigFuelG2);
|
|
ECAM_controller.warningReset(emerconfigFAC);
|
|
ECAM_controller.warningReset(emerconfigBusTie2);
|
|
ECAM_controller.warningReset(emerconfigAPU);
|
|
ECAM_controller.warningReset(emerconfigVent);
|
|
ECAM_controller.warningReset(emerconfigAltn);
|
|
ECAM_controller.warningReset(emerconfigProt);
|
|
ECAM_controller.warningReset(emerconfigMaxSpeed);
|
|
}
|
|
}
|
|
|
|
var messages_priority_2 = func {
|
|
phaseVar = phaseNode.getValue();
|
|
# DC EMER CONFIG
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dcEss.getValue() < 25 and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() < 25 and phaseVar != 4 and phaseVar != 8) {
|
|
dcEmerconfig.active = 1;
|
|
dcEmerconfigManOn.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcEmerconfig);
|
|
ECAM_controller.warningReset(dcEmerconfigManOn);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and !dcEmerconfig.active and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() < 25 and phaseVar != 4 and phaseVar != 8) {
|
|
dcBus12Fault.active = 1;
|
|
dcBus12FaultBlower.active = 1;
|
|
dcBus12FaultExtract.active = 1;
|
|
dcBus12FaultBaroRef.active = 1;
|
|
dcBus12FaultIcing.active = 1;
|
|
dcBus12FaultBrking.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcBus12Fault);
|
|
ECAM_controller.warningReset(dcBus12FaultBlower);
|
|
ECAM_controller.warningReset(dcBus12FaultExtract);
|
|
ECAM_controller.warningReset(dcBus12FaultBaroRef);
|
|
ECAM_controller.warningReset(dcBus12FaultIcing);
|
|
ECAM_controller.warningReset(dcBus12FaultBrking);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.acEss.getValue() < 110 and phaseVar != 4 and phaseVar != 8) {
|
|
AcBusEssFault.active = 1;
|
|
if (!systems.ELEC.Switch.acEssFeed.getBoolValue()) {
|
|
AcBusEssFaultFeed.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(AcBusEssFaultFeed);
|
|
}
|
|
AcBusEssFaultAtc.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(AcBusEssFault);
|
|
ECAM_controller.warningReset(AcBusEssFaultFeed);
|
|
ECAM_controller.warningReset(AcBusEssFaultAtc);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.ac1.getValue() < 110 and phaseVar != 4 and phaseVar != 8) {
|
|
AcBus1Fault.active = 1;
|
|
AcBus1FaultBlower.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(AcBus1Fault);
|
|
ECAM_controller.warningReset(AcBus1FaultBlower);
|
|
}
|
|
|
|
if (!dcEmerconfig.active and systems.ELEC.Bus.dcEss.getValue() < 25 and phaseVar != 4 and phaseVar != 8) {
|
|
DcEssBusFault.active = 1;
|
|
DcEssBusFaultRadio.active = 1;
|
|
DcEssBusFaultRadio2.active = 1;
|
|
DcEssBusFaultBaro.active = 1;
|
|
DcEssBusFaultGPWS.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(DcEssBusFault);
|
|
ECAM_controller.warningReset(DcEssBusFaultRadio);
|
|
ECAM_controller.warningReset(DcEssBusFaultRadio2);
|
|
ECAM_controller.warningReset(DcEssBusFaultBaro);
|
|
ECAM_controller.warningReset(DcEssBusFaultGPWS);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.ac2.getValue() < 110 and phaseVar != 4 and phaseVar != 8) {
|
|
AcBus2Fault.active = 1;
|
|
AcBus2FaultExtract.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(AcBus2Fault);
|
|
ECAM_controller.warningReset(AcBus2FaultExtract);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() >= 25 and phaseVar != 4 and phaseVar != 8) {
|
|
dcBus1Fault.active = 1;
|
|
dcBus1FaultBlower.active = 1;
|
|
dcBus1FaultExtract.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcBus1Fault);
|
|
ECAM_controller.warningReset(dcBus1FaultBlower);
|
|
ECAM_controller.warningReset(dcBus1FaultExtract);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dc1.getValue() >= 25 and systems.ELEC.Bus.dc2.getValue() <= 25 and phaseVar != 4 and phaseVar != 8) {
|
|
dcBus2Fault.active = 1;
|
|
dcBus2FaultAirData.active = 1;
|
|
dcBus2FaultBaro.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcBus2Fault);
|
|
ECAM_controller.warningReset(dcBus2FaultAirData);
|
|
ECAM_controller.warningReset(dcBus2FaultBaro);
|
|
}
|
|
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and !dcEmerconfig.active and systems.ELEC.Bus.dcBat.getValue() < 25 and phaseVar != 4 and phaseVar != 5 and phaseVar != 7 and phaseVar != 8) {
|
|
dcBusBatFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcBusBatFault);
|
|
}
|
|
|
|
if (!(getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and !getprop("/systems/electrical/relay/emer-glc/contact-pos")) and systems.ELEC.Bus.dcEssShed.getValue() < 25 and systems.ELEC.Bus.dcEss.getValue() >= 25 and phaseVar != 4 and phaseVar != 8) {
|
|
dcBusEssShed.active = 1;
|
|
dcBusEssShedExtract.active = 1;
|
|
dcBusEssShedIcing.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(dcBusEssShed);
|
|
ECAM_controller.warningReset(dcBusEssShedExtract);
|
|
ECAM_controller.warningReset(dcBusEssShedIcing);
|
|
}
|
|
|
|
if (!(getprop("/systems/electrical/some-electric-thingie/emer-elec-config") and !getprop("/systems/electrical/relay/emer-glc/contact-pos")) and systems.ELEC.Bus.acEssShed.getValue() < 110 and systems.ELEC.Bus.acEss.getValue() >= 110 and phaseVar != 4 and phaseVar != 8) {
|
|
acBusEssShed.active = 1;
|
|
if (!getprop("/systems/electrical/some-electric-thingie/emer-elec-config")) {
|
|
acBusEssShedAtc.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(acBusEssShed);
|
|
}
|
|
} else {
|
|
ECAM_controller.warningReset(acBusEssShed);
|
|
ECAM_controller.warningReset(acBusEssShedAtc);
|
|
}
|
|
|
|
if (fcu.FCUController.FCU1.failed and fcu.FCUController.FCU2.failed and systems.ELEC.Bus.dcEss.getValue() >= 25 and systems.ELEC.Bus.dcEss.getValue() >= 25) {
|
|
fcuFault.active = 1;
|
|
fcuFaultBaro.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(fcuFault);
|
|
ECAM_controller.warningReset(fcuFaultBaro);
|
|
}
|
|
|
|
if (fcu.FCUController.FCU1.failed and !fcu.FCUController.FCU2.failed and systems.ELEC.Bus.dcEss.getValue() >= 25) {
|
|
fcuFault1.active = 1;
|
|
fcuFault1Baro.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(fcuFault1);
|
|
ECAM_controller.warningReset(fcuFault1Baro);
|
|
}
|
|
|
|
if (fcu.FCUController.FCU2.failed and !fcu.FCUController.FCU1.failed and systems.ELEC.Bus.dc2.getValue() >= 25) {
|
|
fcuFault2.active = 1;
|
|
fcuFault2Baro.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(fcuFault2);
|
|
ECAM_controller.warningReset(fcuFault2Baro);
|
|
}
|
|
|
|
# APU EMER SHUT DOWN
|
|
if (apuEmerShutdown.clearFlag == 0 and systems.apuEmerShutdown.getBoolValue() and !getprop("/systems/fire/apu/warning-active") and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
apuEmerShutdown.active = 1;
|
|
} elsif (apuEmerShutdown.clearFlag == 1) {
|
|
ECAM_controller.warningReset(apuEmerShutdown);
|
|
apuEmerShutdown.hasSubmsg = 1;
|
|
}
|
|
|
|
if (apuEmerShutdownMast.clearFlag == 0 and getprop("/controls/APU/master") and apuEmerShutdown.active == 1) {
|
|
apuEmerShutdownMast.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuEmerShutdownMast);
|
|
apuEmerShutdown.hasSubmsg = 0;
|
|
}
|
|
|
|
if (eng1FireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[0].condition == 0 or (systems.engFireDetectorUnits.vector[0].loopOne == 9 and systems.engFireDetectorUnits.vector[0].loopTwo == 9 and systems.eng1Inop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng1FireDetFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1FireDetFault);
|
|
}
|
|
|
|
if (eng1LoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[0].loopOne == 9 and systems.engFireDetectorUnits.vector[0].loopTwo != 9 and !systems.eng1Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng1LoopAFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1LoopAFault);
|
|
}
|
|
|
|
if (eng1LoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[0].loopOne != 9 and systems.engFireDetectorUnits.vector[0].loopTwo == 9 and !systems.eng1Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng1LoopBFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng1LoopBFault);
|
|
}
|
|
|
|
if (eng2FireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[1].condition == 0 or (systems.engFireDetectorUnits.vector[1].loopOne == 9 and systems.engFireDetectorUnits.vector[1].loopTwo == 9 and systems.eng2Inop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng2FireDetFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2FireDetFault);
|
|
}
|
|
|
|
if (eng2LoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[1].loopOne == 9 and systems.engFireDetectorUnits.vector[1].loopTwo != 9 and !systems.eng2Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng2LoopAFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2LoopAFault);
|
|
}
|
|
|
|
if (eng2LoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[1].loopOne != 9 and systems.engFireDetectorUnits.vector[1].loopTwo == 9 and !systems.eng2Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
eng2LoopBFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(eng2LoopBFault);
|
|
}
|
|
|
|
if (apuFireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[2].condition == 0 or (systems.engFireDetectorUnits.vector[2].loopOne == 9 and systems.engFireDetectorUnits.vector[2].loopTwo == 9 and systems.apuInop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
apuFireDetFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuFireDetFault);
|
|
}
|
|
|
|
if (apuLoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[2].loopOne == 9 and systems.engFireDetectorUnits.vector[2].loopTwo != 9 and !systems.apuInop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
apuLoopAFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuLoopAFault);
|
|
}
|
|
|
|
if (apuLoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[2].loopOne != 9 and systems.engFireDetectorUnits.vector[2].loopTwo == 9 and !systems.apuInop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
apuLoopBFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(apuLoopBFault);
|
|
}
|
|
|
|
if (crgAftFireDetFault.clearFlag == 0 and (systems.cargoSmokeDetectorUnits.vector[0].condition == 0 or systems.cargoSmokeDetectorUnits.vector[1].condition == 0) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
crgAftFireDetFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(crgAftFireDetFault);
|
|
}
|
|
|
|
if (crgFwdFireDetFault.clearFlag == 0 and systems.cargoSmokeDetectorUnits.vector[2].condition == 0 and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
|
|
crgFwdFireDetFault.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(crgFwdFireDetFault);
|
|
}
|
|
}
|
|
|
|
var messages_priority_1 = func {
|
|
}
|
|
|
|
var messages_priority_0 = func {
|
|
if (FWC.Btn.recallStsNormalOutput.getBoolValue()) {
|
|
recallNormal.active = 1;
|
|
recallNormal1.active = 1;
|
|
recallNormal2.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(recallNormal);
|
|
ECAM_controller.warningReset(recallNormal1);
|
|
ECAM_controller.warningReset(recallNormal2);
|
|
}
|
|
}
|
|
|
|
var messages_config_memo = func {
|
|
phaseVar = phaseNode.getValue();
|
|
if (getprop("/controls/flight/flap-lever") == 0 or getprop("/controls/flight/flap-lever") == 4 or getprop("/controls/flight/speedbrake") != 0 or getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") > 1.75 or getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") < -3.65 or getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") < -3.55 or getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") > 3.55) {
|
|
setprop("/ECAM/to-config-normal", 0);
|
|
} else {
|
|
setprop("/ECAM/to-config-normal", 1);
|
|
}
|
|
|
|
if (getprop("/ECAM/to-config-test") and (phaseVar == 2 or phaseVar == 9)) {
|
|
setprop("/ECAM/to-config-set", 1);
|
|
} else {
|
|
setprop("/ECAM/to-config-set", 0);
|
|
}
|
|
|
|
if (!getprop("/ECAM/to-config-normal") or phaseVar == 6) {
|
|
setprop("/ECAM/to-config-reset", 1);
|
|
} else {
|
|
setprop("/ECAM/to-config-reset", 0);
|
|
}
|
|
|
|
if (getprop("/controls/autobrake/mode") == 3) {
|
|
toMemoLine1.msg = "T.O AUTO BRK MAX";
|
|
toMemoLine1.colour = "g";
|
|
} else {
|
|
toMemoLine1.msg = "T.O AUTO BRK.....MAX";
|
|
toMemoLine1.colour = "c";
|
|
}
|
|
|
|
if (getprop("/controls/switches/seatbelt-sign") and getprop("/controls/switches/no-smoking-sign")) {
|
|
toMemoLine2.msg = " SIGNS ON";
|
|
toMemoLine2.colour = "g";
|
|
} else {
|
|
toMemoLine2.msg = " SIGNS.........ON";
|
|
toMemoLine2.colour = "c";
|
|
}
|
|
|
|
if (getprop("/controls/flight/speedbrake-arm")) {
|
|
toMemoLine3.msg = " SPLRS ARM";
|
|
toMemoLine3.colour = "g";
|
|
} else {
|
|
toMemoLine3.msg = " SPLRS........ARM";
|
|
toMemoLine3.colour = "c";
|
|
}
|
|
|
|
if (getprop("/controls/flight/flap-pos") > 0 and getprop("/controls/flight/flap-pos") < 5) {
|
|
toMemoLine4.msg = " FLAPS T.O";
|
|
toMemoLine4.colour = "g";
|
|
} else {
|
|
toMemoLine4.msg = " FLAPS........T.O";
|
|
toMemoLine4.colour = "c";
|
|
}
|
|
|
|
if (getprop("/ECAM/to-config-flipflop") and getprop("/ECAM/to-config-normal")) {
|
|
toMemoLine5.msg = " T.O CONFIG NORMAL";
|
|
toMemoLine5.colour = "g";
|
|
} else {
|
|
toMemoLine5.msg = " T.O CONFIG..TEST";
|
|
toMemoLine5.colour = "c";
|
|
}
|
|
|
|
if (getprop("/ECAM/to-config-test") and (phaseVar == 2 or phaseVar == 9)) {
|
|
setprop("/ECAM/to-memo-set", 1);
|
|
} else {
|
|
setprop("/ECAM/to-memo-set", 0);
|
|
}
|
|
|
|
if (phaseVar == 1 or phaseVar == 3 or phaseVar == 6 or phaseVar == 10) {
|
|
setprop("/ECAM/to-memo-reset", 1);
|
|
} else {
|
|
setprop("/ECAM/to-memo-reset", 0);
|
|
}
|
|
|
|
if ((phaseVar == 2 and getprop("/ECAM/engine-start-time") != 0 and getprop("/ECAM/engine-start-time") + 120 < getprop("/sim/time/elapsed-sec")) or getprop("/ECAM/to-memo-flipflop")) {
|
|
toMemoLine1.active = 1;
|
|
toMemoLine2.active = 1;
|
|
toMemoLine3.active = 1;
|
|
toMemoLine4.active = 1;
|
|
toMemoLine5.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(toMemoLine1);
|
|
ECAM_controller.warningReset(toMemoLine2);
|
|
ECAM_controller.warningReset(toMemoLine3);
|
|
ECAM_controller.warningReset(toMemoLine4);
|
|
ECAM_controller.warningReset(toMemoLine5);
|
|
}
|
|
|
|
if (getprop("/fdm/jsbsim/gear/gear-pos-norm") == 1) {
|
|
ldgMemoLine1.msg = "LDG LDG GEAR DN";
|
|
ldgMemoLine1.colour = "g";
|
|
} else {
|
|
ldgMemoLine1.msg = "LDG LDG GEAR......DN";
|
|
ldgMemoLine1.colour = "c";
|
|
}
|
|
|
|
if (getprop("/controls/switches/seatbelt-sign") and getprop("/controls/switches/no-smoking-sign")) {
|
|
ldgMemoLine2.msg = " SIGNS ON";
|
|
ldgMemoLine2.colour = "g";
|
|
} else {
|
|
ldgMemoLine2.msg = " SIGNS.........ON";
|
|
ldgMemoLine2.colour = "c";
|
|
}
|
|
|
|
if (getprop("/controls/flight/speedbrake-arm")) {
|
|
ldgMemoLine3.msg = " SPLRS ARM";
|
|
ldgMemoLine3.colour = "g";
|
|
} else {
|
|
ldgMemoLine3.msg = " SPLRS........ARM";
|
|
ldgMemoLine3.colour = "c";
|
|
}
|
|
|
|
if (getprop("/it-fbw/law") == 1 or getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override")) {
|
|
if (getprop("/controls/flight/flap-pos") == 4) {
|
|
ldgMemoLine4.msg = " FLAPS CONF 3";
|
|
ldgMemoLine4.colour = "g";
|
|
} else {
|
|
ldgMemoLine4.msg = " FLAPS.....CONF 3";
|
|
ldgMemoLine4.colour = "c";
|
|
}
|
|
} else {
|
|
if (getprop("/controls/flight/flap-pos") == 5) {
|
|
ldgMemoLine4.msg = " FLAPS FULL";
|
|
ldgMemoLine4.colour = "g";
|
|
} else {
|
|
ldgMemoLine4.msg = " FLAPS.......FULL";
|
|
ldgMemoLine4.colour = "c";
|
|
}
|
|
}
|
|
|
|
gear_agl_cur = pts.Position.gearAglFt.getValue();
|
|
if (gear_agl_cur < 2000) {
|
|
setprop("/ECAM/ldg-memo-set", 1);
|
|
} else {
|
|
setprop("/ECAM/ldg-memo-set", 0);
|
|
}
|
|
|
|
if (gear_agl_cur > 2200) {
|
|
setprop("/ECAM/ldg-memo-reset", 1);
|
|
} else {
|
|
setprop("/ECAM/ldg-memo-reset", 0);
|
|
}
|
|
|
|
if (gear_agl_cur > 2200) {
|
|
setprop("/ECAM/ldg-memo-2200-set", 1);
|
|
} else {
|
|
setprop("/ECAM/ldg-memo-2200-set", 0);
|
|
}
|
|
|
|
if (phaseVar >= 6 and phaseVar <= 8) {
|
|
setprop("/ECAM/ldg-memo-2200-reset", 1);
|
|
} else {
|
|
setprop("/ECAM/ldg-memo-2200-reset", 0);
|
|
}
|
|
|
|
if ((phaseVar == 6 and getprop("/ECAM/ldg-memo-flipflop") and getprop("/ECAM/ldg-memo-2200-flipflop")) or phaseVar == 7 or phaseVar == 8) {
|
|
ldgMemoLine1.active = 1;
|
|
ldgMemoLine2.active = 1;
|
|
ldgMemoLine3.active = 1;
|
|
ldgMemoLine4.active = 1;
|
|
} else {
|
|
ECAM_controller.warningReset(ldgMemoLine1);
|
|
ECAM_controller.warningReset(ldgMemoLine2);
|
|
ECAM_controller.warningReset(ldgMemoLine3);
|
|
ECAM_controller.warningReset(ldgMemoLine4);
|
|
}
|
|
}
|
|
|
|
var messages_memo = func {
|
|
phaseVar = phaseNode.getValue();
|
|
if (getprop("/services/fuel-truck/enable") == 1) {
|
|
refuelg.active = 1;
|
|
} else {
|
|
refuelg.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/flight/speedbrake-arm") == 1) {
|
|
gnd_splrs.active = 1;
|
|
} else {
|
|
gnd_splrs.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/lighting/seatbelt-sign") == 1) {
|
|
seatbelts.active = 1;
|
|
} else {
|
|
seatbelts.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/lighting/no-smoking-sign") == 1) { # should go off after takeoff assuming switch is in auto due to old logic from the days when smoking was allowed!
|
|
nosmoke.active = 1;
|
|
} else {
|
|
nosmoke.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/lighting/strobe") == 0 and getprop("/gear/gear[1]/wow") == 0) { # todo: use gear branch properties
|
|
strobe_lt_off.active = 1;
|
|
} else {
|
|
strobe_lt_off.active = 0;
|
|
}
|
|
|
|
if (getprop("/consumables/fuel/total-fuel-lbs") < 6000) { # assuming US short ton 2000lb
|
|
fob_3T.active = 1;
|
|
} else {
|
|
fob_3T.active = 0;
|
|
}
|
|
|
|
if (getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-all-override") == 1) {
|
|
gpws_flap_mode_off.active = 1;
|
|
} else {
|
|
gpws_flap_mode_off.active = 0;
|
|
}
|
|
|
|
}
|
|
|
|
var messages_right_memo = func {
|
|
phaseVar = phaseNode.getValue();
|
|
if (FWC.Timer.toInhibitOutput.getValue() == 1) {
|
|
to_inhibit.active = 1;
|
|
} else {
|
|
to_inhibit.active = 0;
|
|
}
|
|
|
|
if (FWC.Timer.ldgInhibitOutput.getValue() == 1) {
|
|
ldg_inhibit.active = 1;
|
|
} else {
|
|
ldg_inhibit.active = 0;
|
|
}
|
|
|
|
if ((getprop("/gear/gear[1]/wow") == 0) and (getprop("/systems/fire/engine1/warning-active") == 1 or getprop("/systems/fire/engine2/warning-active") == 1 or getprop("/systems/fire/apu/warning-active") == 1 or getprop("/systems/failures/cargo-aft-fire") == 1 or getprop("/systems/failures/cargo-fwd-fire") == 1) or (((getprop("/systems/hydraulic/green-psi") < 1500 and getprop("/engines/engine[0]/state") == 3) and (getprop("/systems/hydraulic/yellow-psi") < 1500 and getprop("/engines/engine[1]/state") == 3)) or ((getprop("/systems/hydraulic/green-psi") < 1500 or getprop("/systems/hydraulic/yellow-psi") < 1500) and getprop("/engines/engine[0]/state") == 3 and getprop("/engines/engine[1]/state") == 3) and phaseVar >= 3 and phaseVar <= 8)) {
|
|
# todo: emer elec
|
|
land_asap_r.active = 1;
|
|
} else {
|
|
land_asap_r.active = 0;
|
|
}
|
|
|
|
if (land_asap_r.active == 0 and getprop("/gear/gear[1]/wow") == 0 and ((getprop("/fdm/jsbsim/propulsion/tank[0]/contents-lbs") < 1650 and getprop("/fdm/jsbsim/propulsion/tank[1]/contents-lbs") < 1650) or ((getprop("/systems/electrical/bus/dc-2") < 25 and (getprop("/systems/failures/elac1") == 1 or getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/green-psi") < 1500 and (getprop("/systems/failures/elac1") == 1 and getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/yellow-psi") < 1500 and (getprop("/systems/failures/elac1") == 1 and getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/blue-psi") < 1500 and (getprop("/systems/failures/elac2") == 1 and getprop("/systems/failures/sec2") == 1))) or (phaseVar >= 3 and phaseVar <= 8 and (getprop("/engines/engine[0]/state") != 3 or getprop("/engines/engine[1]/state") != 3)))) {
|
|
land_asap_a.active = 1;
|
|
} else {
|
|
land_asap_a.active = 0;
|
|
}
|
|
|
|
if (libraries.ap_active == 1 and apWarn.getValue() == 1) {
|
|
ap_off.active = 1;
|
|
} else {
|
|
ap_off.active = 0;
|
|
}
|
|
|
|
if (libraries.athr_active == 1 and athrWarn.getValue() == 1) {
|
|
athr_off.active = 1;
|
|
} else {
|
|
athr_off.active = 0;
|
|
}
|
|
|
|
if ((phaseVar >= 2 and phaseVar <= 7) and getprop("controls/flight/speedbrake") != 0) {
|
|
spd_brk.active = 1;
|
|
} else {
|
|
spd_brk.active = 0;
|
|
}
|
|
|
|
if (getprop("/systems/thrust/state1") == "IDLE" and getprop("/systems/thrust/state2") == "IDLE" and phaseVar >= 6 and phaseVar <= 7) {
|
|
spd_brk.colour = "g";
|
|
} else if ((phaseVar >= 2 and phaseVar <= 5) or ((getprop("/systems/thrust/state1") != "IDLE" or getprop("/systems/thrust/state2") != "IDLE") and (phaseVar >= 6 and phaseVar <= 7))) {
|
|
spd_brk.colour = "a";
|
|
}
|
|
|
|
if (getprop("/controls/gear/brake-parking") == 1 and phaseVar != 3) {
|
|
park_brk.active = 1;
|
|
} else {
|
|
park_brk.active = 0;
|
|
}
|
|
if (phaseVar >= 4 and phaseVar <= 8) {
|
|
park_brk.colour = "a";
|
|
} else {
|
|
park_brk.colour = "g";
|
|
}
|
|
|
|
if (getprop("/controls/hydraulic/ptu") == 1 and ((getprop("/systems/hydraulic/yellow-psi") < 1450 and getprop("/systems/hydraulic/green-psi") > 1450 and getprop("/controls/hydraulic/elec-pump-yellow") == 0) or (getprop("/systems/hydraulic/yellow-psi") > 1450 and getprop("/systems/hydraulic/green-psi") < 1450))) {
|
|
ptu.active = 1;
|
|
} else {
|
|
ptu.active = 0;
|
|
}
|
|
|
|
if (getprop("/systems/hydraulic/sources/rat/position") != 0) {
|
|
rat.active = 1;
|
|
} else {
|
|
rat.active = 0;
|
|
}
|
|
|
|
if (phaseVar >= 1 and phaseVar <= 2) {
|
|
rat.colour = "a";
|
|
} else {
|
|
rat.colour = "g";
|
|
}
|
|
|
|
if (getprop("/systems/electrical/relay/emer-glc/contact-pos") == 1 and getprop("/systems/hydraulic/sources/rat/position") != 0 and getprop("/gear/gear[1]/wow") == 0) {
|
|
emer_gen.active = 1;
|
|
} else {
|
|
emer_gen.active = 0;
|
|
}
|
|
|
|
if (getprop("/sim/model/autopush/enabled") == 1) { # this message is only on when towing - not when disc with switch
|
|
nw_strg_disc.active = 1;
|
|
} else {
|
|
nw_strg_disc.active = 0;
|
|
}
|
|
|
|
if (getprop("/engines/engine[0]/state") == 3 or getprop("/engines/engine[1]/state") == 3) {
|
|
nw_strg_disc.colour = "a";
|
|
} else {
|
|
nw_strg_disc.colour = "g";
|
|
}
|
|
|
|
if (getprop("/controls/pneumatic/switches/ram-air") == 1) {
|
|
ram_air.active = 1;
|
|
} else {
|
|
ram_air.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/engines/engine[0]/igniter-a") == 1 or getprop("/controls/engines/engine[0]/igniter-b") == 1 or getprop("/controls/engines/engine[1]/igniter-a") == 1 or getprop("/controls/engines/engine[1]/igniter-b") == 1) {
|
|
ignition.active = 1;
|
|
} else {
|
|
ignition.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/pneumatic/switches/bleedapu") == 1 and getprop("/systems/apu/rpm") >= 95) {
|
|
apu_bleed.active = 1;
|
|
} else {
|
|
apu_bleed.active = 0;
|
|
}
|
|
|
|
if (apu_bleed.active == 0 and getprop("/systems/apu/rpm") >= 95) {
|
|
apu_avail.active = 1;
|
|
} else {
|
|
apu_avail.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/lighting/landing-lights[1]") > 0 or getprop("/controls/lighting/landing-lights[2]") > 0) {
|
|
ldg_lt.active = 1;
|
|
} else {
|
|
ldg_lt.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/switches/leng") == 1 or getprop("/controls/switches/reng") == 1 or getprop("/systems/electrical/bus/dc-1") == 0 or getprop("/systems/electrical/bus/dc-2") == 0) {
|
|
eng_aice.active = 1;
|
|
} else {
|
|
eng_aice.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/switches/wing") == 1) {
|
|
wing_aice.active = 1;
|
|
} else {
|
|
wing_aice.active = 0;
|
|
}
|
|
|
|
if (getprop("/instrumentation/comm[2]/frequencies/selected-mhz") != 0 and (phaseVar == 1 or phaseVar == 2 or phaseVar == 6 or phaseVar == 9 or phaseVar == 10)) {
|
|
vhf3_voice.active = 1;
|
|
} else {
|
|
vhf3_voice.active = 0;
|
|
}
|
|
if (getprop("/controls/autobrake/mode") == 1 and (phaseVar == 7 or phaseVar == 8)) {
|
|
auto_brk_lo.active = 1;
|
|
} else {
|
|
auto_brk_lo.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/autobrake/mode") == 2 and (phaseVar == 7 or phaseVar == 8)) {
|
|
auto_brk_med.active = 1;
|
|
} else {
|
|
auto_brk_med.active = 0;
|
|
}
|
|
|
|
if (getprop("/controls/autobrake/mode") == 3 and (phaseVar == 7 or phaseVar == 8)) {
|
|
auto_brk_max.active = 1;
|
|
} else {
|
|
auto_brk_max.active = 0;
|
|
}
|
|
|
|
if (getprop("/systems/fuel/x-feed") == 1 and getprop("controls/fuel/x-feed") == 1) {
|
|
fuelx.active = 1;
|
|
} else {
|
|
fuelx.active = 0;
|
|
}
|
|
|
|
if (phaseVar >= 3 and phaseVar <= 5) {
|
|
fuelx.colour = "a";
|
|
} else {
|
|
fuelx.colour = "g";
|
|
}
|
|
|
|
if (getprop("/instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override") == 1) { # todo: emer elec
|
|
gpws_flap3.active = 1;
|
|
} else {
|
|
gpws_flap3.active = 0;
|
|
}
|
|
|
|
if (phaseVar >= 2 and phaseVar <= 9 and getprop("/systems/fuel/only-use-ctr-tank") == 1 and getprop("/systems/electrical/bus/ac-1") >= 115 and getprop("/systems/electrical/bus/ac-2") >= 115) {
|
|
ctr_tk_feedg.active = 1;
|
|
} else {
|
|
ctr_tk_feedg.active = 0;
|
|
}
|
|
}
|
|
|
|
# Listeners
|
|
setlistener("/controls/fctl/fac1", func() {
|
|
if (dualFail.active == 0 and emerconfig.active == 0) { return; }
|
|
|
|
if (fac1Node.getBoolValue() and dualFail.active == 1) {
|
|
dualFailFACActive = 0;
|
|
} else {
|
|
dualFailFACActive = 1;
|
|
}
|
|
|
|
if (fac1Node.getBoolValue() and emerconfig.active == 1) {
|
|
emerConfigFACActive = 0;
|
|
} else {
|
|
emerConfigFACActive = 1;
|
|
}
|
|
}, 0, 0);
|
|
|
|
setlistener("/engines/engine[0]/state", func() {
|
|
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
|
|
dualFailNode.setBoolValue(1);
|
|
} else {
|
|
dualFailNode.setBoolValue(0);
|
|
}
|
|
}, 0, 0);
|
|
|
|
setlistener("/engines/engine[1]/state", func() {
|
|
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
|
|
dualFailNode.setBoolValue(1);
|
|
} else {
|
|
dualFailNode.setBoolValue(0);
|
|
}
|
|
}, 0, 0); |