488 lines
No EOL
37 KiB
Text
488 lines
No EOL
37 KiB
Text
# A3XX Electronic Centralised Aircraft Monitoring System
|
|
|
|
# Copyright (c) 2019 Jonathan Redpath (legoboyvdlp)
|
|
|
|
# messages stored in vectors
|
|
|
|
# Lights: 0 = red, 1 = yellow, 9 = none
|
|
# Sounds: 0 = master warn, 1 = chime, 9 = other
|
|
|
|
# Left E/WD
|
|
|
|
var warnings = std.Vector.new([
|
|
var stall = warning.new(msg: "", aural: 2),
|
|
var flap_not_zero = warning.new(msg: "F/CTL FLAP LVR NOT ZERO", colour: "r", aural: 0, light: 0),
|
|
|
|
var overspeed = warning.new(msg: "OVER SPEED", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var overspeedVMO = warning.new(msg: "-VMO/MMO.......350 /.82", colour: "r"),
|
|
var overspeedGear = warning.new(msg: "-VLE...........280 /.67", colour: "r"),
|
|
var overspeedFlap = warning.new(msg: "-VFE................XXX", colour: "r"),
|
|
|
|
# DUAL ENG FAIL
|
|
var dualFail = warning.new(msg: "ENG DUAL FAILURE", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var dualFailModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var dualFailLevers = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var dualFailRelightSPD = warning.new(msg: " OPTIMUM RELIGHT SPD.280", colour: "c"),
|
|
var dualFailRelightSPDCFM = warning.new(msg: " OPTIMUM RELIGHT SPD.300", colour: "c"),
|
|
var dualFailElec = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var dualFailRadio = warning.new(msg: " -VHF1/ATC1..........USE", colour: "c"),
|
|
var dualFailFAC = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"),
|
|
var dualFailRelight = warning.new(msg: "•IF NO RELIGHT AFTER 30S", colour: "w", hasSubmsg: 1),
|
|
var dualFailMasters = warning.new(msg: " -ENG MASTERS.OFF 30S/ON", colour: "c"),
|
|
var dualFailSuccess = warning.new(msg: " •IF UNSUCCESSFUL : ", colour: "w", hasSubmsg: 1),
|
|
var dualFailAPU = warning.new(msg: " -APU (IF AVAIL)...START", colour: "c"),
|
|
var dualFailAPUwing = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var dualFailAPUbleed = warning.new(msg: " -APU BLEED...........ON", colour: "c"),
|
|
var dualFailMastersAPU = warning.new(msg: " -ENG MASTERS.OFF 30S/ON", colour: "c"),
|
|
var dualFailSPDGD = warning.new(msg: " OPTIMUM SPEED.....G DOT", colour: "c"),
|
|
var dualFailAPPR = warning.new(msg: " •EARLY IN APPR : ", colour: "w", hasSubmsg: 1),
|
|
var dualFailcabin = warning.new(msg: " -CAB SECURE.......ORDER", colour: "c"),
|
|
var dualFailrudd = warning.new(msg: " -USE RUDDER WITH CARE ", colour: "c"),
|
|
var dualFailflap = warning.new(msg: " -FOR LDG.....USE FLAP 3", colour: "c"),
|
|
var dualFail5000 = warning.new(msg: " •AT 5000 FT AGL : ", colour: "w", hasSubmsg: 1),
|
|
var dualFailgear = warning.new(msg: " -L/G.........GRVTY EXTN", colour: "c"),
|
|
var dualFailfinalspeed = warning.new(msg: " TARGET SPEED.....150 KT", colour: "c"),
|
|
var dualFailtouch = warning.new(msg: " •AT TOUCH DOWN : ", colour: "w", hasSubmsg: 1),
|
|
var dualFailmasteroff = warning.new(msg: " -ENG MASTERS........OFF", colour: "c"),
|
|
var dualFailapuoff = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"),
|
|
var dualFailevac = warning.new(msg: " -EVAC..........INITIATE", colour: "c"),
|
|
var dualFailbatt = warning.new(msg: " -BAT 1+2............OFF", colour: "c"),
|
|
|
|
# ENG 1 FIRE (flight)
|
|
var eng1Fire = warning.new(msg: "ENG 1 FIRE", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var eng1FireFllever = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
var eng1FireFlmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng1FireFlPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"),
|
|
var eng1FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"),
|
|
var eng1FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng1FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng1FireFl30Sec = warning.new(msg: " •IF FIRE AFTER 30 S:", colour: "w", hasSubmsg: 1),
|
|
var eng1FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
|
|
# ENG 1 FIRE (ground)
|
|
var eng1FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var eng1FireGnstopped = warning.new(msg: " •WHEN A/C IS STOPPED:", colour: "w", hasSubmsg: 1),
|
|
var eng1FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"),
|
|
var eng1FireGnmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng1FireGnPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"),
|
|
var eng1FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng1FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
var eng1FireGnmaster2 = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng1FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng1FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"),
|
|
var eng1FireGnevac = warning.new(msg: " •IF EVAC RQRD:", colour: "w", hasSubmsg: 1),
|
|
var eng1FireGnevacSw = warning.new(msg: " -EVAC COMMAND........ON", colour: "c"),
|
|
var eng1FireGnevacApu = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"),
|
|
var eng1FireGnevacBat = warning.new(msg: " -BAT 1+2............OFF", colour: "c"),
|
|
|
|
# ENG 2 FIRE (flight)
|
|
var eng2Fire = warning.new(msg: "ENG 2 FIRE", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var eng2FireFllever = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
var eng2FireFlmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng2FireFlPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"),
|
|
var eng2FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"),
|
|
var eng2FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng2FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng2FireFl30Sec = warning.new(msg: " •IF FIRE AFTER 30 S:", colour: "w", hasSubmsg: 1),
|
|
var eng2FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
|
|
# ENG 2 FIRE (ground)
|
|
var eng2FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var eng2FireGnstopped = warning.new(msg: " •WHEN A/C IS STOPPED:", colour: "w", hasSubmsg: 1),
|
|
var eng2FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"),
|
|
var eng2FireGnmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng2FireGnPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"),
|
|
var eng2FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng2FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
var eng2FireGnmaster2 = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng2FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng2FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"),
|
|
var eng2FireGnevac = warning.new(msg: " •IF EVAC RQRD:", colour: "w", hasSubmsg: 1),
|
|
var eng2FireGnevacSw = warning.new(msg: " -EVAC COMMAND........ON", colour: "c"),
|
|
var eng2FireGnevacApu = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"),
|
|
var eng2FireGnevacBat = warning.new(msg: " -BAT 1+2............OFF", colour: "c"),
|
|
|
|
# APU FIRE
|
|
var apuFire = warning.new(msg: "APU FIRE ", colour: "r", aural: 0, light: 0, hasSubmsg: 1, sdPage: "apu"),
|
|
var apuFirePB = warning.new(msg: " -APU FIRE P/B......PUSH", colour: "c"),
|
|
var apuFireAgentTimer = warning.new(msg: " -AGENT AFT 10 S...DISCH", colour: "c"),
|
|
var apuFireAgent = warning.new(msg: " -AGENT............DISCH", colour: "c"),
|
|
var apuFireMaster = warning.new(msg: " -MASTER SW..........OFF", colour: "c"),
|
|
|
|
# Config
|
|
var slats_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0),
|
|
var slats_config_1 = warning.new(msg: "SLATS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0),
|
|
var flaps_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0),
|
|
var flaps_config_1 = warning.new(msg: "FLAPS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0),
|
|
var spd_brk_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0),
|
|
var spd_brk_config_1 = warning.new(msg: "SPD BRK NOT RETRACTED", colour: "r", aural: 0, light: 0),
|
|
var pitch_trim_config = warning.new(msg: "CONFIG PITCH TRIM", colour: "r", aural: 0, light: 0),
|
|
var pitch_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0),
|
|
var rud_trim_config = warning.new(msg: "CONFIG RUD TRIM", colour: "r", aural: 0, light: 0),
|
|
var rud_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0),
|
|
var park_brk_config = warning.new(msg: "CONFIG PARK BRK ON", colour: "r", aural: 0, light: 0),
|
|
|
|
# Autopilot
|
|
var ap_offw = warning.new(msg: "AUTO FLT AP OFF", colour: "r", light: 0),
|
|
var athr_offw = warning.new(msg: "AUTO FLT A/THR OFF", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var athr_offw_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"),
|
|
var athr_lock = warning.new(msg: "ENG THRUST LOCKED", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var athr_lock_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"),
|
|
var athr_lim = warning.new(msg: "AUTO FLT A/THR LIMITED", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var athr_lim_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"),
|
|
|
|
# Cargo smoke
|
|
var cargoSmokeFwd = warning.new(msg: "SMOKE FWD CARGO SMOKE", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var cargoSmokeFwdAgent = warning.new(msg: "-AGENT............DISCH", colour: "c"),
|
|
var cargoSmokeAft = warning.new(msg: "SMOKE AFT CARGO SMOKE", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var cargoSmokeAftAgent = warning.new(msg: "-AGENT............DISCH", colour: "c"),
|
|
|
|
# ESS Bus on Bat
|
|
var essBusOnBat = warning.new(msg: "ELEC ESS BUSES ON BAT", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var essBusOnBatLGUplock = warning.new(msg: " •WHEN L/G UPLOCKED :", colour: "w"),
|
|
var essBusOnBatManOn = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var essBusOnBatRetract = warning.new(msg: " •IF L/G RETRACT FAULT:", colour: "w"),
|
|
var essBusOnBatMinSpeed = warning.new(msg: "MIN RAT SPD......180 KT", colour: "c"),
|
|
var essBusOnBatLGCB = warning.new(msg: "-LGCIU1 C/B (C09)..PULL", colour: "c"),
|
|
var essBusOnBatManOn2 = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"),
|
|
|
|
# Emer Config
|
|
var emerconfig = warning.new(msg: "ELEC EMER CONFIG", colour: "r", aural: 0, light: 0, hasSubmsg: 1),
|
|
var emerconfigMinRat = warning.new(msg: "MIN RAT SPD......140 KT", colour: "c"),
|
|
var emerconfigGen = warning.new(msg: "-GEN 1+2....OFF THEN ON", colour: "c"),
|
|
var emerconfigGen2 = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "w"),
|
|
var emerconfigBusTie = warning.new(msg: "-BUS TIE............OFF", colour: "c"),
|
|
var emerconfigGen3 = warning.new(msg: "-GEN 1+2....OFF THEN ON", colour: "c"),
|
|
var emerconfigManOn = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var emerconfigEngMode = warning.new(msg: "-ENG MODE SEL.......IGN", colour: "c"),
|
|
var emerconfigRadio = warning.new(msg: "-VHF1/ATC1..........USE", colour: "c"),
|
|
var emerconfigIcing = warning.new(msg: "AVOID ICING CONDITIONS", colour: "c"),
|
|
var emerconfigFuelG = warning.new(msg: "FUEL GRVTY FEED", colour: "c"),
|
|
var emerconfigFuelG2 = warning.new(msg: "PROC:GRVTY FUEL FEEDING", colour: "c"),
|
|
var emerconfigFAC = warning.new(msg: "-FAC 1......OFF THEN ON", colour: "c"),
|
|
var emerconfigBusTie2 = warning.new(msg: "-BUS TIE...........AUTO", colour: "c"),
|
|
var emerconfigAPU = warning.new(msg: "-APU (IF AVAIL)...START", colour: "c"),
|
|
var emerconfigVent = warning.new(msg: "-BLOWER + EXTRACT..OVRD", colour: "c"),
|
|
var emerconfigAltn = warning.new(msg: "F/CTL ALTN LAW", colour: "a"),
|
|
var emerconfigProt = warning.new(msg: " (PROT LOST)", colour: "a"),
|
|
var emerconfigMaxSpeed = warning.new(msg: " MAX SPEED........320 KT", colour: "c"),
|
|
|
|
# DC EMER CONFIG
|
|
var dcEmerconfig = warning.new(msg: "ELEC DC EMER CONFIG", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var dcEmerconfigManOn = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"),
|
|
|
|
# DC BUS 1 OR 2 FAULT
|
|
var dcBus12Fault = warning.new(msg: "ELEC DC BUS 1+2 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var dcBus12FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
var dcBus12FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var dcBus12FaultBaroRef = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
var dcBus12FaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var dcBus12FaultBrking = warning.new(msg: " MAX BRK........1000 PSI", colour: "c"),
|
|
|
|
# AC ESS BUS FAULT
|
|
var AcBusEssFault = warning.new(msg: "ELEC AC ESS BUS FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var AcBusEssFaultFeed = warning.new(msg: " -AC ESS FEED.......ALTN", colour: "c"),
|
|
var AcBusEssFaultAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"),
|
|
|
|
# AC BUS 1 FAULT
|
|
var AcBus1Fault = warning.new(msg: "ELEC AC BUS 1 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var AcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
|
|
# DC ESS BUS FAULT
|
|
var DcEssBusFault = warning.new(msg: "ELEC DC ESS BUS FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var DcEssBusFaultRadio = warning.new(msg: " -VHF 2 OR 3.........USE", colour: "c"),
|
|
var DcEssBusFaultRadio2 = warning.new(msg: " -AUDIO SWTG......SELECT", colour: "c"),
|
|
var DcEssBusFaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
var DcEssBusFaultGPWS = warning.new(msg: " -GPWS...............OFF", colour: "c"),
|
|
|
|
# AC BUS 2 FAULT
|
|
var AcBus2Fault = warning.new(msg: "ELEC AC BUS 2 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var AcBus2FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
|
|
# DC BUS 1 FAULT
|
|
var dcBus1Fault = warning.new(msg: "ELEC DC BUS 1 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var dcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
var dcBus1FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
|
|
# DC BUS 2 FAULT
|
|
var dcBus2Fault = warning.new(msg: "ELEC DC BUS 2 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var dcBus2FaultAirData = warning.new(msg: " -AIR DATA SWTG......F/O", colour: "c"),
|
|
var dcBus2FaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
|
|
# DC BAT BUS FAULT
|
|
var dcBusBatFault = warning.new(msg: "ELEC DC BAT BUS FAULT", colour: "a", aural: 1, light: 1),
|
|
|
|
# DC ESS BUS SHED
|
|
var dcBusEssShed = warning.new(msg: "ELEC DC ESS BUS SHED", colour: "a", aural: 1, light: 1),
|
|
var dcBusEssShedExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var dcBusEssShedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# AC ESS BUS SHED
|
|
var acBusEssShed = warning.new(msg: "ELEC DC ESS BUS SHED", colour: "a", aural: 1, light: 1),
|
|
var acBusEssShedAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"),
|
|
|
|
# TCAS FAULT
|
|
var tcasFault = warning.new(msg: "NAV TCAS FAULT", colour: "a", aural: 1, light: 1),
|
|
|
|
# FCU fault
|
|
var fcuFault = warning.new(msg: "AUTO FLT FCU 1+2 FAULT", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var fcuFaultBaro = warning.new(msg: " -PFD BARO REF: STD ONLY", colour: "c"),
|
|
var fcuFault1 = warning.new(msg: "AUTO FLT FCU 1 FAULT", colour: "a", hasSubmsg: 1),
|
|
var fcuFault1Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"),
|
|
var fcuFault2 = warning.new(msg: "AUTO FLT FCU 2 FAULT", colour: "a", hasSubmsg: 1),
|
|
var fcuFault2Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"),
|
|
|
|
# APU shutdown
|
|
var apuEmerShutdown = warning.new(msg: "APU EMER SHUT DOWN", colour: "a", aural: 1, light: 1, hasSubmsg: 1),
|
|
var apuEmerShutdownMast = warning.new(msg: " -MASTER SW..........OFF", colour: "c"),
|
|
|
|
# FIRE det fault
|
|
var eng1FireDetFault = warning.new(msg: "ENG 1 FIRE DET FAULT", colour: "a", aural: 1, light: 1),
|
|
var eng1LoopAFault = warning.new(msg: "ENG 1 FIRE LOOP A FAULT", colour: "a"),
|
|
var eng1LoopBFault = warning.new(msg: "ENG 1 FIRE LOOP B FAULT", colour: "a"),
|
|
var eng2FireDetFault = warning.new(msg: "ENG 2 FIRE DET FAULT", colour: "a", aural: 1, light: 1),
|
|
var eng2LoopAFault = warning.new(msg: "ENG 2 FIRE LOOP A FAULT", colour: "a"),
|
|
var eng2LoopBFault = warning.new(msg: "ENG 2 FIRE LOOP B FAULT", colour: "a"),
|
|
var apuFireDetFault = warning.new(msg: "APU FIRE DET FAULT", colour: "a", aural: 1, light: 1),
|
|
var apuLoopAFault = warning.new(msg: "APU FIRE LOOP A FAULT", colour: "a"),
|
|
var apuLoopBFault = warning.new(msg: "APU FIRE LOOP B FAULT", colour: "a"),
|
|
var crgFwdFireDetFault = warning.new(msg: "FWD CRG DET FAULT", colour: "a"),
|
|
var crgAftFireDetFault = warning.new(msg: "AFT CRG DET FAULT", colour: "a"),
|
|
# Recall
|
|
var recallNormal = warning.new(msg: " ", colour: "g", hasSubmsg: 1),
|
|
var recallNormal1 = warning.new(msg: " ", colour: "g", hasSubmsg: 1),
|
|
var recallNormal2 = warning.new(msg: " NORMAL", colour: "g", hasSubmsg: 1),
|
|
]);
|
|
|
|
var configmemos = std.Vector.new([
|
|
var toMemoLine1 = warning.new(msg: "T.O AUTO BRK.....MAX", colour: "c", isMemo: 1),
|
|
var toMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1),
|
|
var toMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1),
|
|
var toMemoLine4 = warning.new(msg: " FLAPS........T.O", colour: "c", isMemo: 1),
|
|
var toMemoLine5 = warning.new(msg: " T.O CONFIG..TEST", colour: "c", isMemo: 1),
|
|
|
|
var ldgMemoLine1 = warning.new(msg: "LDG LDG GEAR......DN", colour: "c", isMemo: 1),
|
|
var ldgMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1),
|
|
var ldgMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1),
|
|
var ldgMemoLine4 = warning.new(msg: " FLAPS.......FULL", colour: "c", isMemo: 1),
|
|
]);
|
|
|
|
var leftmemos = std.Vector.new([
|
|
var company_alert = warning.new(msg: "COMPANY ALERT" ), # Not yet implemented, buzzer sound
|
|
var refuelg = warning.new(msg: "REFUELG" ),
|
|
var irs_in_align = warning.new(msg: "IRS IN ALIGN" ), # Not yet implemented
|
|
var gnd_splrs = warning.new(msg: "GND SPLRS ARMED" ),
|
|
var seatbelts = warning.new(msg: "SEAT BELTS" ),
|
|
var nosmoke = warning.new(msg: "NO SMOKING" ),
|
|
var strobe_lt_off = warning.new(msg: "STROBE LT OFF" ),
|
|
var outr_tk_fuel_xfrd = warning.new(msg: "OUTR TK FUEL XFRD" ),
|
|
var fob_3T = warning.new(msg: "FOB BELOW 3T" ),
|
|
var gpws_flap_mode_off = warning.new(msg: "GPWS FLAP MODE OFF" ),
|
|
var atc_datalink_stby = warning.new(msg: "ATC DATALINK STBY" ), # Not yet implemented
|
|
var company_datalink_stby = warning.new(msg: "COMPANY DATALINK STBY"), # Not yet implemented
|
|
]);
|
|
|
|
# Right E/WD
|
|
|
|
var specialLines = std.Vector.new([
|
|
var to_inhibit = memo.new(msg: "T.O. INHIBIT", colour: "m"),
|
|
var ldg_inhibit = memo.new(msg: "LDG INHIBIT", colour: "m"),
|
|
var land_asap_r = memo.new(msg: "LAND ASAP", colour: "r"),
|
|
var land_asap_a = memo.new(msg: "LAND ASAP", colour: "a"),
|
|
var ap_off = memo.new(msg: "AP OFF", colour: "r"),
|
|
var athr_off = memo.new(msg: "A/THR OFF", colour: "a")
|
|
]);
|
|
|
|
var secondaryFailures = std.Vector.new([
|
|
var secondary_bleed = memo.new(msg: "•AIR BLEED", colour: "a"), # Not yet implemented
|
|
var secondary_press = memo.new(msg: "•CAB PRESS", colour: "a"), # Not yet implemented
|
|
var secondary_vent = memo.new(msg: "•AVNCS VENT", colour: "a"), # Not yet implemented
|
|
var secondary_elec = memo.new(msg: "•ELEC", colour: "a"), # Not yet implemented
|
|
var secondary_hyd = memo.new(msg: "•HYD", colour: "a"), # Not yet implemented
|
|
var secondary_fuel = memo.new(msg: "•FUEL", colour: "a"), # Not yet implemented
|
|
var secondary_cond = memo.new(msg: "•AIR COND", colour: "a"), # Not yet implemented
|
|
var secondary_brake = memo.new(msg: "•BRAKES", colour: "a"), # Not yet implemented
|
|
var secondary_wheel = memo.new(msg: "•WHEEL", colour: "a"), # Not yet implemented
|
|
var secondary_fctl = memo.new(msg: "•F/CTL", colour: "a") # Not yet implemented
|
|
]);
|
|
|
|
var memos = std.Vector.new([
|
|
var spd_brk = memo.new(msg: "SPEED BRK" ),
|
|
var park_brk = memo.new(msg: "PARK BRK" ),
|
|
var ptu = memo.new(msg: "HYD PTU" ),
|
|
var rat = memo.new(msg: "RAT OUT" ),
|
|
var emer_gen = memo.new(msg: "EMER GEN" ),
|
|
var ram_air = memo.new(msg: "RAM AIR ON" ),
|
|
var nw_strg_disc = memo.new(msg: "NW STRG DISC"),
|
|
var ignition = memo.new(msg: "IGNITION" ),
|
|
var cabin_ready = memo.new(msg: "CABIN READY" ), # Not yet implemented
|
|
var pred_ws_off = memo.new(msg: "PRED W/S OFF"), # Not yet implemented
|
|
var terr_stby = memo.new(msg: "TERR STBY" ), # Not yet implemented
|
|
var tcas_stby = memo.new(msg: "TCAS STBY" ), # Not yet implemented
|
|
var acars_call = memo.new(msg: "ACARS CALL" ), # Not yet implemented
|
|
var company_call = memo.new(msg: "COMPANY CALL"), # Not yet implemented
|
|
var satcom_alert = memo.new(msg: "SATCOM ALERT"), # Not yet implemented
|
|
var acars_msg = memo.new(msg: "ACARS MSG" ), # Not yet implemented
|
|
var company_msg = memo.new(msg: "COMPANY MSG" ), # Not yet implemented
|
|
var eng_aice = memo.new(msg: "ENG A.ICE" ),
|
|
var wing_aice = memo.new(msg: "WING A.ICE" ),
|
|
var ice_not_det = memo.new(msg: "ICE NOT DET" ), # Not yet implemented
|
|
var hi_alt = memo.new(msg: "HI ALT" ), # Not yet implemented
|
|
var apu_avail = memo.new(msg: "APU AVAIL" ),
|
|
var apu_bleed = memo.new(msg: "APU BLEED" ),
|
|
var ldg_lt = memo.new(msg: "LDG LT" ),
|
|
var brk_fan = memo.new(msg: "BRK FAN" ), # Not yet implemented
|
|
var audio3_xfrd = memo.new(msg: "AUDIO 3 XFRD"), # Not yet implemented
|
|
var switchg_pnl = memo.new(msg: "SWITCHG PNL" ), # Not yet implemented
|
|
var gpws_flap3 = memo.new(msg: "GPWS FLAP 3" ),
|
|
var hf_data_ovrd = memo.new(msg: "HF DATA OVRD"), # Not yet implemented
|
|
var hf_voice = memo.new(msg: "HF VOICE" ), # Not yet implemented
|
|
var acars_stby = memo.new(msg: "ACARS STBY" ), # Not yet implemented
|
|
var vhf3_voice = memo.new(msg: "VHF3 VOICE" ),
|
|
var auto_brk_lo = memo.new(msg: "AUTO BRK LO" ),
|
|
var auto_brk_med = memo.new(msg: "AUTO BRK MED"),
|
|
var auto_brk_max = memo.new(msg: "AUTO BRK MAX"),
|
|
var auto_brk_off = memo.new(msg: "AUTO BRK OFF"), # Not yet implemented
|
|
var man_ldg_elev = memo.new(msg: "MAN LDG ELEV"), # Not yet implemented
|
|
var ctr_tk_feedg = memo.new(msg: "CTR TK FEEDG"),
|
|
var fuelx = memo.new(msg: "FUEL X FEED" )
|
|
]);
|
|
|
|
var clearWarnings = std.Vector.new();
|
|
|
|
# Status SD page
|
|
var statusLim = std.Vector.new([
|
|
var min_rat_spd = status.new(msg: "MIN RAT SPD.....140 KT", colour: "c"), # Not yet implemented
|
|
var max_spd_gear = status.new(msg: "MAX SPD........280/.67", colour: "c"), # Not yet implemented
|
|
var max_spd_rev = status.new(msg: "MAX SPD........300/.78", colour: "c"), # Not yet implemented
|
|
var buffet_rev = status.new(msg: " •IF BUFFET :", colour: "w"), # Not yet implemented
|
|
var max_spd_rev_buf = status.new(msg: "MAX SPD.............240", colour: "c"), # Not yet implemented
|
|
var max_spd_fctl = status.new(msg: "MAX SPD........320/.77", colour: "c"), # Not yet implemented
|
|
var max_spd_fctl2 = status.new(msg: "MAX SPD.........300 KT", colour: "c"), # Not yet implemented
|
|
var max_spd_gr_door = status.new(msg: "MAX SPD 250/.60", colour: "c"), # Not yet implemented
|
|
var max_alt_press = status.new(msg: "MAX FL : 100/MEA", colour: "c"), # Not yet implemented
|
|
var gravity_fuel = status.new(msg: "-PROC:GRAVTY FUEL FEEDING", colour: "c"), # Not yet implemented
|
|
var gear_kp_dn = status.new(msg: "L/G............KEEP DOWN", colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "PARK BRK ONLY", colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "MAX BRK PR........1000PSI", colour: "c"), # Not yet implemented
|
|
var fuel_gravity = status.new(msg: "FUEL GRAVTY FEED", colour: "c"), # Not yet implemented
|
|
var fctl_manvr = status.new(msg: "MANOEUVER WITH CARE", colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_care = status.new(msg: "USE SPD BRK WITH CARE", colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_dont = status.new(msg: "SPD BRK......DO NOT USE", colour: "c"), # Not yet implemented
|
|
var fctl_rud_care = status.new(msg: "RUD WITH CARE ABV 160KT", colour: "c"), # Not yet implemented
|
|
var eng_thr_changes = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented
|
|
var avoid_neg_g_fac = status.new(msg: "AVOID NEGATIVE G FACTOR", colour: "c"), # Not yet implemented
|
|
var avoid_icing = status.new(msg: "AVOID ICING CONDITONS", colour: "c"), # Not yet implemented
|
|
var severe_icing = status.new(msg: " IF A/C ICING SEVERE :", colour: "w"), # Not yet implemented, a319 only
|
|
var severe_icing_2 = status.new(msg: "MIN SPD ALPHA PROT", colour: "c"), # Not yet implemented, a319 only
|
|
var avoid_thr_chg = status.new(msg: "AVOID THR CHANGES", colour: "c"), # Not yet implemented, iae only
|
|
var avoid_thr_chg_2 = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented, iae only
|
|
var avoid_adv_cond = status.new(msg: "AVOID ADVERSE CONDITIONS", colour: "c"), # Not yet implemented, iae only
|
|
var atc_com_voice = status.new(msg: "ATC COM VOICE ONLY", colour: "c") # Not yet implemented, iae only
|
|
]);
|
|
|
|
var statusApprProc = std.Vector.new([
|
|
var dual_hyd_b_g = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_g_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_4 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_5 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_b_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_y_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_g_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_g_y_2 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_g_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_b = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_b_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_b_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_g = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_g_2 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_g_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var single_hyd_g_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_y = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_y_2 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_y_3 = status.new(msg: "-YELLOW ENG 1 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var single_hyd_y_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var avionics_smk = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: " •BEFORE L/G EXTENSION :", colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: "-GEN 2...............ON", colour: "c"), # Not yet implemented
|
|
var avionics_smk_4 = status.new(msg: "-EMER ELEC GEN1 LINE ON", colour: "c"), # Not yet implemented
|
|
|
|
var ths_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var ths_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var ths_stuck_3 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var ths_stuck_4 = status.new(msg: " •IF MAN TRIM NOT AVAIL:", colour: "w"), # Not yet implemented
|
|
var ths_stuck_5 = status.new(msg: " •WHEN CONF3 AND VAPP :", colour: "w"), # Not yet implemented
|
|
var ths_stuck_6 = status.new(msg: "-L/G.................DN", colour: "c"), # Not yet implemented
|
|
|
|
var flap_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var flap_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var flap_stuck_3 = status.new(msg: "-FLAPS...KEEP CONF FULL", colour: "c"), # Not yet implemented
|
|
var flap_stuck_4 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
var flap_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
|
|
var slat_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var slat_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 1", colour: "c"), # Not yet implemented
|
|
var slat_stuck_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var slat_stuck_4 = status.new(msg: "-CTR TK PUMPS.......OFF", colour: "c"), # Not yet implemented
|
|
var slat_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var slat_stuck_6 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
|
|
var fctl_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var fctl_proc_2 = status.new(msg: " •IF BUFFET:", colour: "w"), # Not yet implemented
|
|
var fctl_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var fctl_proc_4 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var fctl_proc_5 = status.new(msg: "-AT 1000FT AGL:L/G...DN", colour: "c"), # Not yet implemented
|
|
|
|
var rev_unlc_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_2 = status.new(msg: " •IF BUFFET:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_4 = status.new(msg: "-APPR SPD : VREF + 55KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_5 = status.new(msg: "-APPR SPD : VREF + 60KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_6 = status.new(msg: "-RUD TRIM.......5 DEG R", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_7 = status.new(msg: "-RUD TRIM.......5 DEG L", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_8 = status.new(msg: "-ATHR...............OFF", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_9 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_10 = status.new(msg: " •WHEN LDG ASSURED:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_11 = status.new(msg: "-L/G...............DOWN", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_12 = status.new(msg: " •AT 800FT AGL:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_13 = status.new(msg: "-TARGET SPD : VREF+40KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_14 = status.new(msg: "-TARGET SPD : VREF+45KT", colour: "c"), # Not yet implemented
|
|
|
|
var thr_lvr_flt = status.new(msg: "APPR PROC THR LEVER", colour: "a"), # Not yet implemented
|
|
var thr_lvr_flt_2 = status.new(msg: "-AUTOLAND...........USE", colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_3 = status.new(msg: " •IF AUTOLAND NOT USED:", colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_4 = status.new(msg: " •AT 500FT AGL :", colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c"), # Not yet implemented
|
|
|
|
var fuel_ctl_flt = status.new(msg: "APPR PROC FUEL CTL FAULT", colour: "a"), # Not yet implemented
|
|
var fuel_ctl_flt_2 = status.new(msg: "REV 1........DO NOT USE", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_3 = status.new(msg: "REV 2........DO NOT USE", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_4 = status.new(msg: " •AFTER TOUCHDOWN:", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented
|
|
var fuel_ctl_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c") # Not yet implemented
|
|
]);
|
|
|
|
var statusProc = std.Vector.new();
|
|
var statusInfo = std.Vector.new();
|
|
var statusCancelled = std.Vector.new();
|
|
var statusInop = std.Vector.new();
|
|
var statusMaintenance = std.Vector.new();
|
|
|
|
# hack thrust lock message:
|
|
var msgSave = athr_lock.msg; |