# Aircraft Config Center # Joshua Davidson (Octal450) # Copyright (c) 2019 Joshua Davidson (Octal450) var spinning = maketimer(0.05, func { var spinning = getprop("/systems/acconfig/spinning"); if (spinning == 0) { setprop("/systems/acconfig/spin", "\\"); setprop("/systems/acconfig/spinning", 1); } else if (spinning == 1) { setprop("/systems/acconfig/spin", "|"); setprop("/systems/acconfig/spinning", 2); } else if (spinning == 2) { setprop("/systems/acconfig/spin", "/"); setprop("/systems/acconfig/spinning", 3); } else if (spinning == 3) { setprop("/systems/acconfig/spin", "-"); setprop("/systems/acconfig/spinning", 0); } }); var failReset = func { # Put IntegratedSystems Fail Reset Functions here } var failResetOld = func { setprop("/systems/failures/elac1", 0); setprop("/systems/failures/elac2", 0); setprop("/systems/failures/sec1", 0); setprop("/systems/failures/sec2", 0); setprop("/systems/failures/sec3", 0); setprop("/systems/failures/fac1", 0); setprop("/systems/failures/fac2", 0); setprop("/systems/failures/aileron-left", 0); setprop("/systems/failures/aileron-right", 0); setprop("/systems/failures/elevator-left", 0); setprop("/systems/failures/elevator-right", 0); setprop("/systems/failures/rudder", 0); setprop("/systems/failures/spoiler-l1", 0); setprop("/systems/failures/spoiler-l2", 0); setprop("/systems/failures/spoiler-l3", 0); setprop("/systems/failures/spoiler-l4", 0); setprop("/systems/failures/spoiler-l5", 0); setprop("/systems/failures/spoiler-r1", 0); setprop("/systems/failures/spoiler-r2", 0); setprop("/systems/failures/spoiler-r3", 0); setprop("/systems/failures/spoiler-r4", 0); setprop("/systems/failures/spoiler-r5", 0); setprop("/systems/failures/elec-ac-ess", 0); setprop("/systems/failures/elec-batt1", 0); setprop("/systems/failures/elec-batt2", 0); setprop("/systems/failures/elec-galley", 0); setprop("/systems/failures/elec-genapu", 0); setprop("/systems/failures/elec-gen1", 0); setprop("/systems/failures/elec-gen2", 0); setprop("/systems/failures/bleed-apu", 0); setprop("/systems/failures/bleed-ext", 0); setprop("/systems/failures/bleed-eng1", 0); setprop("/systems/failures/bleed-eng2", 0); setprop("/systems/failures/pack1", 0); setprop("/systems/failures/pack2", 0); setprop("/systems/failures/hyd-blue", 0); setprop("/systems/failures/hyd-green", 0); setprop("/systems/failures/hyd-yellow", 0); setprop("/systems/failures/ptu", 0); setprop("/systems/failures/pump-blue", 0); setprop("/systems/failures/pump-green", 0); setprop("/systems/failures/pump-yellow-eng", 0); setprop("/systems/failures/pump-yellow-elec", 0); setprop("/systems/failures/tank0pump1", 0); setprop("/systems/failures/tank0pump2", 0); setprop("/systems/failures/tank1pump1", 0); setprop("/systems/failures/tank1pump2", 0); setprop("/systems/failures/tank2pump1", 0); setprop("/systems/failures/tank2pump2", 0); setprop("/systems/failures/fuelmode", 0); setprop("/systems/failures/cargo-aft-fire", 0); setprop("/systems/failures/cargo-fwd-fire", 0); setprop("/systems/failures/engine-left-fire", 0); setprop("/systems/failures/engine-right-fire", 0); } failResetOld(); setprop("/systems/acconfig/autoconfig-running", 0); setprop("/systems/acconfig/spinning", 0); setprop("/systems/acconfig/spin", "-"); setprop("/systems/acconfig/options/revision", 0); setprop("/systems/acconfig/new-revision", 0); setprop("/systems/acconfig/out-of-date", 0); setprop("/systems/acconfig/mismatch-code", "0x000"); setprop("/systems/acconfig/mismatch-reason", "XX"); setprop("/systems/acconfig/options/keyboard-mode", 0); setprop("/systems/acconfig/options/adirs-skip", 0); setprop("/systems/acconfig/options/welcome-skip", 0); setprop("/systems/acconfig/options/no-rendering-warn", 0); setprop("/systems/acconfig/options/pfd-rate", 1); setprop("/systems/acconfig/options/nd-rate", 1); setprop("/systems/acconfig/options/uecam-rate", 1); setprop("/systems/acconfig/options/lecam-rate", 1); setprop("/systems/acconfig/options/iesi-rate", 1); setprop("/systems/acconfig/options/autopush/show-route", 1); setprop("/systems/acconfig/options/autopush/show-wingtip", 1); var main_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/main/dialog", "Aircraft/A320-family/AircraftConfig/main.xml"); var welcome_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/welcome/dialog", "Aircraft/A320-family/AircraftConfig/welcome.xml"); var ps_load_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psload/dialog", "Aircraft/A320-family/AircraftConfig/psload.xml"); var ps_loaded_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psloaded/dialog", "Aircraft/A320-family/AircraftConfig/psloaded.xml"); var init_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/init/dialog", "Aircraft/A320-family/AircraftConfig/ac_init.xml"); var help_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/help/dialog", "Aircraft/A320-family/AircraftConfig/help.xml"); var fbw_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fbw/dialog", "Aircraft/A320-family/AircraftConfig/fbw.xml"); var fail_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fail/dialog", "Aircraft/A320-family/AircraftConfig/fail.xml"); var about_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/about/dialog", "Aircraft/A320-family/AircraftConfig/about.xml"); var update_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/update/dialog", "Aircraft/A320-family/AircraftConfig/update.xml"); var updated_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/updated/dialog", "Aircraft/A320-family/AircraftConfig/updated.xml"); var error_mismatch = gui.Dialog.new("sim/gui/dialogs/acconfig/error/mismatch/dialog", "Aircraft/A320-family/AircraftConfig/error-mismatch.xml"); var groundservices_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/groundsrvc/dialog", "Aircraft/A320-family/AircraftConfig/groundservices.xml"); var du_quality = gui.Dialog.new("sim/gui/dialogs/acconfig/du-quality/dialog", "Aircraft/A320-family/AircraftConfig/du-quality.xml"); var rendering_dlg = gui.Dialog.new("sim/gui/dialogs/rendering/dialog", "Aircraft/A320-family/AircraftConfig/rendering.xml"); spinning.start(); init_dlg.open(); http.load("https://raw.githubusercontent.com/legoboyvdlp/A320-family/master/revision.txt").done(func(r) setprop("/systems/acconfig/new-revision", r.response)); var revisionFile = (getprop("/sim/aircraft-dir") ~ "/revision.txt"); var current_revision = io.readfile(revisionFile); print("A320-family Revision: " ~ current_revision); setprop("/systems/acconfig/revision", current_revision); setlistener("/systems/acconfig/new-revision", func { if (getprop("/systems/acconfig/new-revision") > current_revision) { setprop("/systems/acconfig/out-of-date", 1); } else { setprop("/systems/acconfig/out-of-date", 0); } }); var mismatch_chk = func { if (num(string.replace(getprop("/sim/version/flightgear"),".","")) < 201910) { setprop("/systems/acconfig/mismatch-code", "0x121"); setprop("/systems/acconfig/mismatch-reason", "FGFS version is too old! Please update FlightGear to at least 2019.1.0."); if (getprop("/systems/acconfig/out-of-date") != 1) { error_mismatch.open(); } libraries.systemsLoop.stop(); print("Mismatch: 0x121"); welcome_dlg.close(); } else if (getprop("/gear/gear[0]/wow") == 0 or getprop("/position/altitude-ft") >= 15000) { setprop("/systems/acconfig/mismatch-code", "0x223"); setprop("/systems/acconfig/mismatch-reason", "Preposterous configuration detected for initialization. Check your position or scenery."); if (getprop("/systems/acconfig/out-of-date") != 1) { error_mismatch.open(); } libraries.systemsLoop.stop(); print("Mismatch: 0x223"); welcome_dlg.close(); } else if (getprop("/systems/acconfig/libraries-loaded") != 1) { setprop("/systems/acconfig/mismatch-code", "0x247"); setprop("/systems/acconfig/mismatch-reason", "System files are missing or damaged. Please download a new copy of the aircraft."); if (getprop("/systems/acconfig/out-of-date") != 1) { error_mismatch.open(); } libraries.systemsLoop.stop(); print("Mismatch: 0x247"); welcome_dlg.close(); } } setlistener("/sim/signals/fdm-initialized", func { init_dlg.close(); if (getprop("/systems/acconfig/out-of-date") == 1) { update_dlg.open(); print("System: The A320-family is out of date!"); } mismatch_chk(); readSettings(); if (getprop("/systems/acconfig/out-of-date") != 1 and getprop("/systems/acconfig/options/revision") < current_revision and getprop("/systems/acconfig/mismatch-code") == "0x000") { updated_dlg.open(); if (getprop("/systems/acconfig/options/no-rendering-warn") != 1) { renderingSettings.check(); } } else if (getprop("/systems/acconfig/out-of-date") != 1 and getprop("/systems/acconfig/mismatch-code") == "0x000" and getprop("/systems/acconfig/options/welcome-skip") != 1) { welcome_dlg.open(); if (getprop("/systems/acconfig/options/no-rendering-warn") != 1) { renderingSettings.check(); } } setprop("/systems/acconfig/options/revision", current_revision); writeSettings(); spinning.stop(); }); var renderingSettings = { check: func() { var rembrandt = getprop("/sim/rendering/rembrandt/enabled"); var ALS = getprop("/sim/rendering/shaders/skydome"); var customSettings = getprop("/sim/rendering/shaders/custom-settings") == 1; var landmass = getprop("/sim/rendering/shaders/landmass") >= 4; var model = getprop("/sim/rendering/shaders/model") >= 2; if (!rembrandt and (!ALS or !customSettings or !landmass or !model)) { rendering_dlg.open(); } }, fixAll: func() { me.fixCore(); var landmass = getprop("/sim/rendering/shaders/landmass") >= 4; var model = getprop("/sim/rendering/shaders/model") >= 2; if (!landmass) { setprop("/sim/rendering/shaders/landmass", 4); } if (!model) { setprop("/sim/rendering/shaders/model", 2); } }, fixCore: func() { setprop("/sim/rendering/shaders/skydome", 1); # ALS on setprop("/sim/rendering/shaders/custom-settings", 1); gui.popupTip("Rendering Settings updated!"); }, }; var readSettings = func { io.read_properties(getprop("/sim/fg-home") ~ "/Export/A320-family-config.xml", "/systems/acconfig/options"); setprop("/options/system/keyboard-mode", getprop("/systems/acconfig/options/keyboard-mode")); setprop("/controls/adirs/skip", getprop("/systems/acconfig/options/adirs-skip")); setprop("/sim/model/autopush/route/show", getprop("/systems/acconfig/options/autopush/show-route")); setprop("/sim/model/autopush/route/show-wingtip", getprop("/systems/acconfig/options/autopush/show-wingtip")); } var writeSettings = func { setprop("/systems/acconfig/options/keyboard-mode", getprop("/options/system/keyboard-mode")); setprop("/systems/acconfig/options/adirs-skip", getprop("/controls/adirs/skip")); setprop("/systems/acconfig/options/autopush/show-route", getprop("/sim/model/autopush/route/show")); setprop("/systems/acconfig/options/autopush/show-wingtip", getprop("/sim/model/autopush/route/show-wingtip")); io.write_properties(getprop("/sim/fg-home") ~ "/Export/A320-family-config.xml", "/systems/acconfig/options"); } ################ # Panel States # ################ # Cold and Dark var colddark = func { if (getprop("/systems/acconfig/mismatch-code") == "0x000") { spinning.start(); ps_loaded_dlg.close(); ps_load_dlg.open(); setprop("/systems/acconfig/autoconfig-running", 1); setprop("/controls/gear/brake-left", 1); setprop("/controls/gear/brake-right", 1); # Initial shutdown, and reinitialization. setprop("/controls/engines/engine-start-switch", 1); setprop("/controls/engines/engine[0]/cutoff-switch", 1); setprop("/controls/engines/engine[1]/cutoff-switch", 1); setprop("/controls/flight/slats", 0.000); setprop("/controls/flight/flaps", 0.000); setprop("/controls/flight/flap-lever", 0); setprop("/controls/flight/flap-pos", 0); setprop("/controls/flight/flap-txt", " "); libraries.flaptimer.stop(); setprop("/controls/flight/speedbrake-arm", 0); setprop("/controls/flight/speedbrake", 0); setprop("/controls/gear/gear-down", 1); setprop("/controls/flight/elevator-trim", 0); setprop("/controls/switches/beacon", 0); setprop("/controls/switches/strobe", 0.0); setprop("/controls/switches/wing-lights", 0); setprop("/controls/lighting/nav-lights-switch", 0); setprop("/controls/lighting/turnoff-light-switch", 0); setprop("/controls/lighting/taxi-light-switch", 0.0); setprop("/controls/switches/landing-lights-l", 0.0); setprop("/controls/switches/landing-lights-r", 0.0); setprop("/controls/atc/mode-knob", 0); atc.transponderPanel.modeSwitch(1); libraries.systemsInit(); failResetOld(); if (getprop("/engines/engine[1]/n2-actual") < 2) { colddark_b(); } else { var colddark_eng_off = setlistener("/engines/engine[1]/n2-actual", func { if (getprop("/engines/engine[1]/n2-actual") < 2) { removelistener(colddark_eng_off); colddark_b(); } }); } } } var colddark_b = func { # Continues the Cold and Dark script, after engines fully shutdown. setprop("/controls/APU/master", 0); setprop("/controls/APU/start", 0); settimer(func { setprop("/controls/gear/brake-left", 0); setprop("/controls/gear/brake-right", 0); setprop("/systems/acconfig/autoconfig-running", 0); ps_load_dlg.close(); ps_loaded_dlg.open(); spinning.stop(); }, 2); } # Ready to Start Eng var beforestart = func { if (getprop("/systems/acconfig/mismatch-code") == "0x000") { spinning.start(); ps_loaded_dlg.close(); ps_load_dlg.open(); setprop("/systems/acconfig/autoconfig-running", 1); setprop("/controls/gear/brake-left", 1); setprop("/controls/gear/brake-right", 1); # First, we set everything to cold and dark. setprop("/controls/engines/engine-start-switch", 1); setprop("/controls/engines/engine[0]/cutoff-switch", 1); setprop("/controls/engines/engine[1]/cutoff-switch", 1); setprop("/controls/flight/slats", 0.000); setprop("/controls/flight/flaps", 0.000); setprop("/controls/flight/flap-lever", 0); setprop("/controls/flight/flap-pos", 0); setprop("/controls/flight/flap-txt", " "); libraries.flaptimer.stop(); setprop("/controls/flight/speedbrake-arm", 0); setprop("/controls/flight/speedbrake", 0); setprop("/controls/gear/gear-down", 1); setprop("/controls/flight/elevator-trim", 0); libraries.systemsInit(); failResetOld(); setprop("/controls/APU/master", 0); setprop("/controls/APU/start", 0); # Now the Startup! props.globals.getNode("/controls/electrical/switches/bat-1").setValue(1); props.globals.getNode("/controls/electrical/switches/bat-2").setValue(1); setprop("/controls/APU/master", 1); setprop("/controls/APU/start", 1); var apu_rpm_chk = setlistener("/systems/apu/rpm", func { if (getprop("/systems/apu/rpm") >= 98) { removelistener(apu_rpm_chk); beforestart_b(); } }); } } var beforestart_b = func { # Continue with engine start prep. setprop("/controls/fuel/tank0pump1", 1); setprop("/controls/fuel/tank0pump2", 1); setprop("/controls/fuel/tank1pump1", 1); setprop("/controls/fuel/tank1pump2", 1); setprop("/controls/fuel/tank2pump1", 1); setprop("/controls/fuel/tank2pump2", 1); setprop("/controls/electrical/switches/apu", 1); setprop("/controls/electrical/switches/galley", 1); setprop("/controls/electrical/switches/gen-1", 1); setprop("/controls/electrical/switches/gen-2", 1); setprop("/controls/pneumatic/switches/bleedapu", 1); setprop("/controls/pneumatic/switches/bleed1", 1); setprop("/controls/pneumatic/switches/bleed2", 1); setprop("/controls/pneumatic/switches/pack1", 1); setprop("/controls/pneumatic/switches/pack2", 1); setprop("/controls/adirs/ir[0]/knob","1"); setprop("/controls/adirs/ir[1]/knob","1"); setprop("/controls/adirs/ir[2]/knob","1"); systems.ADIRS.skip(0); systems.ADIRS.skip(1); systems.ADIRS.skip(2); setprop("/controls/adirs/mcducbtn", 1); setprop("/controls/switches/beacon", 1); setprop("/controls/lighting/nav-lights-switch", 1); setprop("/controls/radio/rmp[0]/on", 1); setprop("/controls/radio/rmp[1]/on", 1); setprop("/controls/radio/rmp[2]/on", 1); setprop("/systems/fadec/power-avail", 1); setprop("/systems/fadec/powered-time", -310); settimer(func { setprop("/controls/gear/brake-left", 0); setprop("/controls/gear/brake-right", 0); setprop("/systems/acconfig/autoconfig-running", 0); ps_load_dlg.close(); ps_loaded_dlg.open(); spinning.stop(); }, 2); } # Ready to Taxi var taxi = func { if (getprop("/systems/acconfig/mismatch-code") == "0x000") { spinning.start(); ps_loaded_dlg.close(); ps_load_dlg.open(); setprop("/systems/acconfig/autoconfig-running", 1); setprop("/controls/gear/brake-left", 1); setprop("/controls/gear/brake-right", 1); # First, we set everything to cold and dark. setprop("/controls/engines/engine-start-switch", 1); setprop("/controls/engines/engine[0]/cutoff-switch", 1); setprop("/controls/engines/engine[1]/cutoff-switch", 1); setprop("/controls/flight/slats", 0.000); setprop("/controls/flight/flaps", 0.000); setprop("/controls/flight/flap-lever", 0); setprop("/controls/flight/flap-pos", 0); setprop("/controls/flight/flap-txt", " "); libraries.flaptimer.stop(); setprop("/controls/flight/speedbrake-arm", 0); setprop("/controls/flight/speedbrake", 0); setprop("/controls/gear/gear-down", 1); setprop("/controls/flight/elevator-trim", 0); libraries.systemsInit(); failResetOld(); setprop("/controls/APU/master", 0); setprop("/controls/APU/start", 0); # Now the Startup! props.globals.getNode("/controls/electrical/switches/bat-1").setValue(1); props.globals.getNode("/controls/electrical/switches/bat-2").setValue(1); setprop("/controls/APU/master", 1); setprop("/controls/APU/start", 1); var apu_rpm_chk = setlistener("/systems/apu/rpm", func { if (getprop("/systems/apu/rpm") >= 98) { removelistener(apu_rpm_chk); taxi_b(); } }); } } var taxi_b = func { # Continue with engine start prep, and start engines. setprop("/controls/fuel/tank0pump1", 1); setprop("/controls/fuel/tank0pump2", 1); setprop("/controls/fuel/tank1pump1", 1); setprop("/controls/fuel/tank1pump2", 1); setprop("/controls/fuel/tank2pump1", 1); setprop("/controls/fuel/tank2pump2", 1); setprop("/controls/electrical/switches/apu", 1); setprop("/controls/electrical/switches/galley", 1); setprop("/controls/electrical/switches/gen-1", 1); setprop("/controls/electrical/switches/gen-2", 1); setprop("/controls/pneumatic/switches/bleedapu", 1); setprop("/controls/pneumatic/switches/bleed1", 1); setprop("/controls/pneumatic/switches/bleed2", 1); setprop("/controls/pneumatic/switches/pack1", 1); setprop("/controls/pneumatic/switches/pack2", 1); setprop("/controls/adirs/ir[0]/knob","1"); setprop("/controls/adirs/ir[1]/knob","1"); setprop("/controls/adirs/ir[2]/knob","1"); systems.ADIRS.skip(0); systems.ADIRS.skip(1); systems.ADIRS.skip(2); setprop("/controls/adirs/mcducbtn", 1); setprop("/controls/switches/beacon", 1); setprop("/controls/switches/wing-lights", 1); setprop("/controls/lighting/nav-lights-switch", 1); setprop("/controls/radio/rmp[0]/on", 1); setprop("/controls/radio/rmp[1]/on", 1); setprop("/controls/radio/rmp[2]/on", 1); setprop("/controls/atc/mode-knob", 2); atc.transponderPanel.modeSwitch(3); setprop("/systems/fadec/power-avail", 1); setprop("/systems/fadec/powered-time", -310); setprop("/controls/lighting/turnoff-light-switch", 1); setprop("/controls/lighting/taxi-light-switch", 0.5); setprop("/controls/switches/landing-lights-l", 0.5); setprop("/controls/switches/landing-lights-r", 0.5); settimer(taxi_c, 2); } var taxi_c = func { setprop("/controls/engines/engine-start-switch", 2); setprop("/controls/engines/engine[0]/cutoff-switch", 0); setprop("/controls/engines/engine[1]/cutoff-switch", 0); settimer(func { taxi_d(); }, 10); } var taxi_d = func { # After Start items. setprop("/controls/engines/engine-start-switch", 1); setprop("/controls/APU/master", 0); setprop("/controls/APU/start", 0); setprop("/controls/pneumatic/switches/bleedapu", 0); setprop("/controls/gear/brake-left", 0); setprop("/controls/gear/brake-right", 0); setprop("/systems/acconfig/autoconfig-running", 0); ps_load_dlg.close(); ps_loaded_dlg.open(); spinning.stop(); } # Ready to Takeoff var takeoff = func { if (getprop("/systems/acconfig/mismatch-code") == "0x000") { # The same as taxi, except we set some things afterwards. taxi(); var eng_one_chk_c = setlistener("/engines/engine[0]/state", func { if (getprop("/engines/engine[0]/state") == 3) { removelistener(eng_one_chk_c); setprop("/controls/switches/strobe", 1.0); setprop("/controls/lighting/taxi-light-switch", 1); setprop("/controls/switches/landing-lights-l", 1); setprop("/controls/switches/landing-lights-r", 1); setprop("/controls/flight/speedbrake-arm", 1); setprop("/controls/flight/flaps", 0.290); setprop("/controls/flight/slats", 0.666); setprop("/controls/flight/flap-lever", 1); setprop("/controls/flight/flap-pos", 2); setprop("/controls/flight/flap-txt", "1+F"); setprop("/controls/atc/mode-knob", 4); atc.transponderPanel.modeSwitch(5); libraries.flaptimer.start(); setprop("/controls/flight/elevator-trim", -0.07); systems.arm_autobrake(3); libraries.ECAM.toConfig(); } }); } }