# A3XX Electronic Centralised Aircraft Monitoring System # Copyright (c) 2019 Jonathan Redpath (legoboyvdlp) # messages stored in vectors # Lights: 0 = red, 1 = yellow, 9 = none # Sounds: 0 = master warn, 1 = chime, 9 = other # Left E/WD var warnings = std.Vector.new([ var stall = warning.new(msg: "", aural: 2), var flap_not_zero = warning.new(msg: "F/CTL FLAP LVR NOT ZERO", colour: "r", aural: 0, light: 0), var overspeed = warning.new(msg: "OVER SPEED", colour: "r", aural: 0, light: 0, isMainMsg: 1), var overspeedVMO = warning.new(msg: "-VMO/MMO.......350 /.82", colour: "r"), var overspeedGear = warning.new(msg: "-VLE...........280 /.67", colour: "r"), var overspeedFlap = warning.new(msg: "-VFE................XXX", colour: "r"), # DUAL ENG FAIL var dualFail = warning.new(msg: "ENG DUAL FAILURE", colour: "r", aural: 0, light: 0, isMainMsg: 1), var dualFailModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"), var dualFailLevers = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"), var dualFailRelightSPD = warning.new(msg: " OPTIMUM RELIGHT SPD.280", colour: "c"), var dualFailRelightSPDCFM = warning.new(msg: " OPTIMUM RELIGHT SPD.300", colour: "c"), var dualFailElec = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"), var dualFailRadio = warning.new(msg: " -VHF1/ATC1..........USE", colour: "c"), var dualFailFAC = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"), var dualFailRelight = warning.new(msg: "•IF NO RELIGHT AFTER 30S", colour: "w", isMainMsg: 1), var dualFailMasters = warning.new(msg: " -ENG MASTERS.OFF 30S/ON", colour: "c"), var dualFailSuccess = warning.new(msg: " •IF UNSUCCESSFUL : ", colour: "w", isMainMsg: 1), var dualFailAPU = warning.new(msg: " -APU (IF AVAIL)...START", colour: "c"), var dualFailAPUwing = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var dualFailAPUbleed = warning.new(msg: " -APU BLEED...........ON", colour: "c"), var dualFailMastersAPU = warning.new(msg: " -ENG MASTERS.OFF 30S/ON", colour: "c"), var dualFailSPDGD = warning.new(msg: " OPTIMUM SPEED.....G DOT", colour: "c"), var dualFailAPPR = warning.new(msg: " •EARLY IN APPR : ", colour: "w", isMainMsg: 1), var dualFailcabin = warning.new(msg: " -CAB SECURE.......ORDER", colour: "c"), var dualFailrudd = warning.new(msg: " -USE RUDDER WITH CARE ", colour: "c"), var dualFailflap = warning.new(msg: " -FOR LDG.....USE FLAP 3", colour: "c"), var dualFail5000 = warning.new(msg: " •AT 5000 FT AGL : ", colour: "w", isMainMsg: 1), var dualFailgear = warning.new(msg: " -L/G.........GRVTY EXTN", colour: "c"), var dualFailfinalspeed = warning.new(msg: " TARGET SPEED.....150 KT", colour: "c"), var dualFailtouch = warning.new(msg: " •AT TOUCH DOWN : ", colour: "w", isMainMsg: 1), var dualFailmasteroff = warning.new(msg: " -ENG MASTERS........OFF", colour: "c"), var dualFailapuoff = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"), var dualFailevac = warning.new(msg: " -EVAC..........INITIATE", colour: "c"), var dualFailbatt = warning.new(msg: " -BAT 1+2............OFF", colour: "c"), # ENG 1 FIRE (flight) var eng1Fire = warning.new(msg: "ENG 1 FIRE", colour: "r", aural: 0, light: 0, isMainMsg: 1), var eng1FireFllever = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"), var eng1FireFlmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"), var eng1FireFlPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"), var eng1FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"), var eng1FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"), var eng1FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"), var eng1FireFl30Sec = warning.new(msg: " •IF FIRE AFTER 30 S:", colour: "w", isMainMsg: 1), var eng1FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"), # ENG 1 FIRE (ground) var eng1FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"), var eng1FireGnstopped = warning.new(msg: " •WHEN A/C IS STOPPED:", colour: "w", isMainMsg: 1), var eng1FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"), var eng1FireGnmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"), var eng1FireGnPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"), var eng1FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"), var eng1FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"), var eng1FireGnmaster2 = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"), var eng1FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"), var eng1FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"), var eng1FireGnevac = warning.new(msg: " •IF EVAC RQRD:", colour: "w", isMainMsg: 1), var eng1FireGnevacSw = warning.new(msg: " -EVAC COMMAND........ON", colour: "c"), var eng1FireGnevacApu = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"), var eng1FireGnevacBat = warning.new(msg: " -BAT 1+2............OFF", colour: "c"), # ENG 2 FIRE (flight) var eng2Fire = warning.new(msg: "ENG 2 FIRE", colour: "r", aural: 0, light: 0, isMainMsg: 1), var eng2FireFllever = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"), var eng2FireFlmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"), var eng2FireFlPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"), var eng2FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"), var eng2FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"), var eng2FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"), var eng2FireFl30Sec = warning.new(msg: " •IF FIRE AFTER 30 S:", colour: "w", isMainMsg: 1), var eng2FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"), # ENG 2 FIRE (ground) var eng2FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"), var eng2FireGnstopped = warning.new(msg: " •WHEN A/C IS STOPPED:", colour: "w", isMainMsg: 1), var eng2FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"), var eng2FireGnmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"), var eng2FireGnPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"), var eng2FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"), var eng2FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"), var eng2FireGnmaster2 = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"), var eng2FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"), var eng2FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"), var eng2FireGnevac = warning.new(msg: " •IF EVAC RQRD:", colour: "w", isMainMsg: 1), var eng2FireGnevacSw = warning.new(msg: " -EVAC COMMAND........ON", colour: "c"), var eng2FireGnevacApu = warning.new(msg: " -APU MASTER SW......OFF", colour: "c"), var eng2FireGnevacBat = warning.new(msg: " -BAT 1+2............OFF", colour: "c"), # APU FIRE var apuFire = warning.new(msg: "APU FIRE ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "apu"), var apuFirePB = warning.new(msg: " -APU FIRE P/B......PUSH", colour: "c"), var apuFireAgentTimer = warning.new(msg: " -AGENT AFT 10 S...DISCH", colour: "c"), var apuFireAgent = warning.new(msg: " -AGENT............DISCH", colour: "c"), var apuFireMaster = warning.new(msg: " -MASTER SW..........OFF", colour: "c"), # Config var slats_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0), var slats_config_1 = warning.new(msg: "SLATS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0), var flaps_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0), var flaps_config_1 = warning.new(msg: "FLAPS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0), var spd_brk_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0), var spd_brk_config_1 = warning.new(msg: "SPD BRK NOT RETRACTED", colour: "r", aural: 0, light: 0), var pitch_trim_config = warning.new(msg: "CONFIG PITCH TRIM", colour: "r", aural: 0, light: 0), var pitch_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0), var rud_trim_config = warning.new(msg: "CONFIG RUD TRIM", colour: "r", aural: 0, light: 0), var rud_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0), var park_brk_config = warning.new(msg: "CONFIG PARK BRK ON", colour: "r", aural: 0, light: 0), # Autopilot off involuntary var ap_offw = warning.new(msg: "AUTO FLT AP OFF", colour: "r", light: 0, isMainMsg: 1), # Cargo smoke var cargoSmokeFwd = warning.new(msg: "SMOKE FWD CARGO SMOKE", colour: "r", aural: 0, light: 0, isMainMsg: 1), var cargoSmokeFwdAgent = warning.new(msg: "-AGENT............DISCH", colour: "c"), var cargoSmokeAft = warning.new(msg: "SMOKE AFT CARGO SMOKE", colour: "r", aural: 0, light: 0, isMainMsg: 1), var cargoSmokeAftAgent = warning.new(msg: "-AGENT............DISCH", colour: "c"), # ESS Bus on Bat var essBusOnBat = warning.new(msg: "ELEC ESS BUSES ON BAT", colour: "r", aural: 0, light: 0, isMainMsg: 1), var essBusOnBatLGUplock = warning.new(msg: " •WHEN L/G UPLOCKED :", colour: "w"), var essBusOnBatManOn = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"), var essBusOnBatRetract = warning.new(msg: " •IF L/G RETRACT FAULT:", colour: "w"), var essBusOnBatMinSpeed = warning.new(msg: "MIN RAT SPD......180 KT", colour: "c"), var essBusOnBatLGCB = warning.new(msg: "-LGCIU1 C/B (C09)..PULL", colour: "c"), var essBusOnBatManOn2 = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"), # Emer Config var emerconfig = warning.new(msg: "ELEC EMER CONFIG", colour: "r", aural: 0, light: 0, isMainMsg: 1), var emerconfigMinRat = warning.new(msg: "MIN RAT SPD......140 KT", colour: "c"), var emerconfigGen = warning.new(msg: "-GEN 1+2....OFF THEN ON", colour: "c"), var emerconfigGen2 = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "w"), var emerconfigBusTie = warning.new(msg: "-BUS TIE............OFF", colour: "c"), var emerconfigGen3 = warning.new(msg: "-GEN 1+2....OFF THEN ON", colour: "c"), var emerconfigManOn = warning.new(msg: "-EMER ELEC PWR...MAN ON", colour: "c"), var emerconfigEngMode = warning.new(msg: "-ENG MODE SEL.......IGN", colour: "c"), var emerconfigRadio = warning.new(msg: "-VHF1/ATC1..........USE", colour: "c"), var emerconfigIcing = warning.new(msg: "AVOID ICING CONDITIONS", colour: "c"), var emerconfigFuelG = warning.new(msg: "FUEL GRVTY FEED", colour: "c"), var emerconfigFuelG2 = warning.new(msg: "PROC:GRVTY FUEL FEEDING", colour: "c"), var emerconfigFAC = warning.new(msg: "-FAC 1......OFF THEN ON", colour: "c"), var emerconfigBusTie2 = warning.new(msg: "-BUS TIE...........AUTO", colour: "c"), var emerconfigAPU = warning.new(msg: "-APU (IF AVAIL)...START", colour: "c"), var emerconfigVent = warning.new(msg: "-BLOWER + EXTRACT..OVRD", colour: "c"), var emerconfigAltn = warning.new(msg: "F/CTL ALTN LAW", colour: "a"), var emerconfigProt = warning.new(msg: " (PROT LOST)", colour: "a"), var emerconfigMaxSpeed = warning.new(msg: " MAX SPEED........320 KT", colour: "c"), # DC EMER CONFIG var dcEmerconfig = warning.new(msg: "ELEC DC EMER CONFIG", colour: "a", aural: 1, light: 1, isMainMsg: 1), var dcEmerconfigManOn = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"), # DC BUS 1 OR 2 FAULT var dcBus12Fault = warning.new(msg: "ELEC DC BUS 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var dcBus12FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"), var dcBus12FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"), var dcBus12FaultBaroRef = warning.new(msg: " -BARO REF.........CHECK", colour: "c"), var dcBus12FaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var dcBus12FaultBrking = warning.new(msg: " MAX BRK........1000 PSI", colour: "c"), # AC ESS BUS FAULT var AcBusEssFault = warning.new(msg: "ELEC AC ESS BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var AcBusEssFaultFeed = warning.new(msg: " -AC ESS FEED.......ALTN", colour: "c"), var AcBusEssFaultAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"), # AC BUS 1 FAULT var AcBus1Fault = warning.new(msg: "ELEC AC BUS 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var AcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"), # DC ESS BUS FAULT var DcEssBusFault = warning.new(msg: "ELEC DC ESS BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var DcEssBusFaultRadio = warning.new(msg: " -VHF 2 OR 3.........USE", colour: "c"), var DcEssBusFaultRadio2 = warning.new(msg: " -AUDIO SWTG......SELECT", colour: "c"), var DcEssBusFaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"), var DcEssBusFaultGPWS = warning.new(msg: " -GPWS...............OFF", colour: "c"), # AC BUS 2 FAULT var AcBus2Fault = warning.new(msg: "ELEC AC BUS 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var AcBus2FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"), # DC BUS 1 FAULT var dcBus1Fault = warning.new(msg: "ELEC DC BUS 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var dcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"), var dcBus1FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"), # DC BUS 2 FAULT var dcBus2Fault = warning.new(msg: "ELEC DC BUS 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var dcBus2FaultAirData = warning.new(msg: " -AIR DATA SWTG......F/O", colour: "c"), var dcBus2FaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"), # DC BAT BUS FAULT var dcBusBatFault = warning.new(msg: "ELEC DC BAT BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), # DC ESS BUS SHED var dcBusEssShed = warning.new(msg: "ELEC DC ESS BUS SHED", colour: "a", aural: 1, light: 1, isMainMsg: 1), var dcBusEssShedExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"), var dcBusEssShedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), # AC ESS BUS SHED var acBusEssShed = warning.new(msg: "ELEC DC ESS BUS SHED", colour: "a", aural: 1, light: 1, isMainMsg: 1), var acBusEssShedAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"), # Autothrust var athr_offw = warning.new(msg: "AUTO FLT A/THR OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1), var athr_offw_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"), var athr_lock = warning.new(msg: "ENG THRUST LOCKED", colour: "a", aural: 1, light: 1, isMainMsg: 1), var athr_lock_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"), var athr_lim = warning.new(msg: "AUTO FLT A/THR LIMITED", colour: "a", aural: 1, light: 1, isMainMsg: 1), var athr_lim_1 = warning.new(msg: "-THR LEVERS........MOVE", colour: "c"), # TCAS FAULT var tcasFault = warning.new(msg: "NAV TCAS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var gpwsFault = warning.new(msg: "NAV GPWS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var gpwsFaultOff = warning.new(msg: "-GPWS...............OFF", colour: "c"), var gpwsTerrFault = warning.new(msg: "NAV GPWS TERR DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var gpwsTerrFaultOff = warning.new(msg: "-GPWS TERR..........OFF", colour: "c"), # FAC and Rudder System var fac12Fault = warning.new(msg: "AUTO FLT FAC 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var fac12FaultRud = warning.new(msg: "RUD WITH CARE ABV 160 KT", colour: "c"), var fac12FaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"), var fac12FaultSuccess = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "w"), var fac12FaultFacOff = warning.new(msg: " -FAC 1+2............OFF", colour: "c"), var yawDamperSysFault = warning.new(msg: "AUTO FLT YAW DAMPER SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1), var yawDamperSysFaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"), # var rudderTrimSysFault = warning.new(msg: "AUTO FLT RUD TRIM SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1), not implemented # var rudderTrimSysFaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"), var rudTravLimSysFault = warning.new(msg: "AUTO FLT RUD TRV LIM SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1), var rudTravLimSysFaultRud = warning.new(msg: "RUD WITH CARE ABV 160 KT", colour: "c"), var rudTravLimSysFaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"), var fac1Fault = warning.new(msg: "AUTO FLT FAC 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var fac1FaultFac = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"), var fac1FaultSuccess = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "w"), var fac1FaultFacOff = warning.new(msg: " -FAC 1..............OFF", colour: "c"), var fac2Fault = warning.new(msg: "AUTO FLT FAC 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var fac2FaultFac = warning.new(msg: " -FAC 2......OFF THEN ON", colour: "c"), var fac2FaultSuccess = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "w"), var fac2FaultFacOff = warning.new(msg: " -FAC 2..............OFF", colour: "c"), var yawDamper1Fault = warning.new(msg: "AUTO FLT YAW DAMPER 1", colour: "a", isMainMsg: 1), var yawDamper2Fault = warning.new(msg: "AUTO FLT YAW DAMPER 2", colour: "a", isMainMsg: 1), # var rudTrim1Fault = warning.new(msg: "AUTO FLT RUD TRIM1 FAULT", colour: "a", isMainMsg: 1), not implemented # var rudTrim2Fault = warning.new(msg: "AUTO FLT RUD TRIM2 FAULT", colour: "a", isMainMsg: 1), not implemented var rudTravLimSys1Fault = warning.new(msg: "AUTO FLT RUD TRV LIM 1", colour: "a", isMainMsg: 1), var rudTravLimSys2Fault = warning.new(msg: "AUTO FLT RUD TRV LIM 2", colour: "a", isMainMsg: 1), # FCU fault var fcuFault = warning.new(msg: "AUTO FLT FCU 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var fcuFaultBaro = warning.new(msg: " -PFD BARO REF: STD ONLY", colour: "c"), var fcuFault1 = warning.new(msg: "AUTO FLT FCU 1 FAULT", colour: "a", isMainMsg: 1), var fcuFault1Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"), var fcuFault2 = warning.new(msg: "AUTO FLT FCU 2 FAULT", colour: "a", isMainMsg: 1), var fcuFault2Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"), # APU shutdown var apuEmerShutdown = warning.new(msg: "APU EMER SHUT DOWN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var apuEmerShutdownMast = warning.new(msg: " -MASTER SW..........OFF", colour: "c"), var apuAutoShutdown = warning.new(msg: "APU AUTO SHUT DOWN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var apuAutoShutdownMast = warning.new(msg: " -MASTER SW..........OFF", colour: "c"), # Bleed var bleed1Fault = warning.new(msg: "AIR ENG 1 BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var bleed1FaultOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"), var bleed1FaultPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var bleed1FaultXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var bleed2Fault = warning.new(msg: "AIR ENG 2 BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var bleed2FaultOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"), var bleed2FaultPack = warning.new(msg: " -PACK 2.............OFF", colour: "c"), var bleed2FaultXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var apuBleedFault = warning.new(msg: "AIR APU BLEED FAULT", colour: "a", aural: 1, light: 1), var hpValve1Fault = warning.new(msg: "AIR ENG 1 HP VALVE FAULT", colour: "a"), var hpValve2Fault = warning.new(msg: "AIR ENG 2 HP VALVE FAULT", colour: "a"), var xBleedFault = warning.new(msg: "AIR X BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var xBleedFaultMan = warning.new(msg: " -X BLEED........MAN CTL", colour: "c"), var xBleedOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var xBleedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var bleed1Off = warning.new(msg: "AIR BLEED 1 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1), var bleed2Off = warning.new(msg: "AIR BLEED 2 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1), var engBleedLowTemp = warning.new(msg: "AIR ENG 1+2 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1), var engBleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"), var engBleedLowTempAdv = warning.new(msg: " -THR LEVERS.....ADVANCE", colour: "c"), var engBleedLowTempSucc = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "c"), var engBleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"), var engBleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var eng1BleedLowTemp = warning.new(msg: "AIR ENG 1 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1BleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"), var eng1BleedLowTempAdv = warning.new(msg: " -THR LEVER 1....ADVANCE", colour: "c"), var eng1BleedLowTempSucc = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "c"), var eng1BleedLowTempXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var eng1BleedLowTempOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"), var eng1BleedLowTempPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var eng1BleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"), var eng1BleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var eng2BleedLowTemp = warning.new(msg: "AIR ENG 2 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2BleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"), var eng2BleedLowTempAdv = warning.new(msg: " -THR LEVER 2....ADVANCE", colour: "c"), var eng2BleedLowTempSucc = warning.new(msg: " •IF UNSUCCESSFUL :", colour: "c"), var eng2BleedLowTempXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var eng2BleedLowTempOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"), var eng2BleedLowTempPack = warning.new(msg: " -PACK 2.............OFF", colour: "c"), var eng2BleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"), var eng2BleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var eng1BleedAbPress = warning.new(msg: "AIR ENG 1 BLEED ABNORM PR", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1BleedAbPressPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var eng1BleedAbPressXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var eng2BleedAbPress = warning.new(msg: "AIR ENG 2 BLEED ABNORM PR", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2BleedAbPressPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var eng2BleedAbPressXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var eng1BleedNotClsd = warning.new(msg: "AIR ENG 1 BLEED NOT CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1BleedNotClsdOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"), var eng2BleedNotClsd = warning.new(msg: "AIR ENG 2 BLEED NOT CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2BleedNotClsdOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"), var bleedMonFault = warning.new(msg: "BLEED MONITORING FAULT", colour: "a", isMainMsg: 1), var bleedMon1Fault = warning.new(msg: "BLEED MONIT SYS 1 FAULT", colour: "a", isMainMsg: 1), var bleedMon2Fault = warning.new(msg: "BLEED MONIT SYS 2 FAULT", colour: "a", isMainMsg: 1), # PACK var pack12Fault = warning.new(msg: "AIR PACK 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack12FaultPackOff1 = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var pack12FaultPackOff2 = warning.new(msg: " -PACK 2.............OFF", colour: "c"), var pack12FaultDescend = warning.new(msg: " -DESCENT TO FL 100/MEA ", colour: "c"), var pack12FaultDiffPr = warning.new(msg: " •WHEN DIFF PR <1 PSI", colour: "w"), var pack12FaultDiffPr2 = warning.new(msg: " AND FL BELOW 100 :", colour: "w"), var pack12FaultRam = warning.new(msg: " -RAM AIR...........OPEN", colour: "c"), var pack12FaultMax = warning.new(msg: " MAX FL..........100/MEA", colour: "c"), var pack12FaultOvht = warning.new(msg: " •WHEN PACK OVHT OUT:", colour: "w"), var pack12FaultPackOn1 = warning.new(msg: " -PACK 1..............ON", colour: "c"), var pack12FaultPackOn2 = warning.new(msg: " -PACK 2..............ON", colour: "c"), var pack1Ovht = warning.new(msg: "AIR PACK 1 OVHT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack1OvhtOff = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var pack1OvhtOut = warning.new(msg: " •WHEN PACK OVHT OUT:", colour: "w"), var pack1OvhtPack = warning.new(msg: " -PACK 1..............ON", colour: "c"), var pack2Ovht = warning.new(msg: "AIR PACK 2 OVHT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack2OvhtOff = warning.new(msg: " -PACK 2.............OFF", colour: "c"), var pack2OvhtOut = warning.new(msg: " •WHEN PACK OVHT OUT:", colour: "w"), var pack2OvhtPack = warning.new(msg: " -PACK 2..............ON", colour: "c"), var pack1Fault = warning.new(msg: "AIR PACK 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack1FaultOff = warning.new(msg: " -PACK 1.............OFF", colour: "c"), var pack2Fault = warning.new(msg: "AIR PACK 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack2FaultOff = warning.new(msg: " -PACK 2.............OFF", colour: "c"), var pack1Off = warning.new(msg: "AIR PACK 1 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1), var pack2Off = warning.new(msg: "AIR PACK 2 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1), var cabFanFault = warning.new(msg: "COND L+R CAB FAN FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var cabFanFaultFlow = warning.new(msg: " -PACK FLOW...........HI", colour: "c"), var trimAirFault = warning.new(msg: "COND TRIM AIR SYS FAULT", colour: "a", isMainMsg: 1), var trimAirFaultAft = warning.new(msg: " -AFT CAB TRIM VALVE", colour: "c"), var trimAirFaultFwd = warning.new(msg: " -FWD CAB TRIM VALVE", colour: "c"), var trimAirFaultCkpt = warning.new(msg: " -CKPT TRIM VALVE", colour: "c"), # Eng AICE var eng1IceClosed = warning.new(msg: "ANTI ICE ENG1 VALVE CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1IceClosedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var eng2IceClosed = warning.new(msg: "ANTI ICE ENG2 VALVE CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2IceClosedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var eng1IceOpen = warning.new(msg: "ANTI ICE ENG1 VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1IceOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"), var eng2IceOpen = warning.new(msg: "ANTI ICE ENG2 VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2IceOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"), # Wing AICE var wingIceSysFault = warning.new(msg: "WING A.ICE SYS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var wingIceSysFaultXbld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"), var wingIceSysFaultOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var wingIceSysFaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"), var wingIceLOpen = warning.new(msg: "WING A.ICE L VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var wingIceLOpenOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var wingIceLOpenEngOff = warning.new(msg: " -ENG1 BLEED.........OFF", colour: "c"), var wingIceLOpenXbld = warning.new(msg: " -X BLEED...........SHUT", colour: "c"), var wingIceLOpenApuOff = warning.new(msg: " -APU BLEED..........OFF", colour: "c"), var wingIceLOpenSpacer = warning.new(msg: " ", colour: "c"), var wingIceLOpenFlt = warning.new(msg: " WAI AVAIL IN FLT", colour: "c"), var wingIceLOpenEngOn = warning.new(msg: " -ENG1 BLEED.........OFF", colour: "c"), var wingIceLOpenIceReq = warning.new(msg: " -WING ANTI ICE..AS RQRD", colour: "c"), var wingIceLOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"), var wingIceROpen = warning.new(msg: "WING A.ICE R VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1), var wingIceROpenOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var wingIceROpenEngOff = warning.new(msg: " -ENG2 BLEED.........OFF", colour: "c"), var wingIceROpenXbld = warning.new(msg: " -X BLEED...........SHUT", colour: "c"), var wingIceROpenApuOff = warning.new(msg: " -APU BLEED..........OFF", colour: "c"), var wingIceROpenSpacer = warning.new(msg: " ", colour: "c"), var wingIceROpenFlt = warning.new(msg: " WAI AVAIL IN FLT", colour: "c"), var wingIceROpenEngOn = warning.new(msg: " -ENG2 BLEED.........OFF", colour: "c"), var wingIceROpenIceReq = warning.new(msg: " -WING ANTI ICE..AS RQRD", colour: "c"), var wingIceROpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"), var wingIceOpenGnd = warning.new(msg: "WING A.ICE OPEN ON GND", colour: "a", aural: 1, light: 1, isMainMsg: 1), var wingIceOpenGndShut = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"), var wingIceLHiPr = warning.new(msg: "WING A.ICE L HI PR", colour: "a", isMainMsg: 1), var wingIceLHiPrThrust = warning.new(msg: " THRUST LIM PENTALTY", colour: "c"), var wingIceRHiPr = warning.new(msg: "WING A.ICE R HI PR", colour: "a", isMainMsg: 1), var wingIceRHiPrThrust = warning.new(msg: " THRUST LIM PENTALTY", colour: "c"), # FIRE det fault var eng1FireDetFault = warning.new(msg: "ENG 1 FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng1LoopAFault = warning.new(msg: "ENG 1 FIRE LOOP A FAULT", colour: "a", isMainMsg: 1), var eng1LoopBFault = warning.new(msg: "ENG 1 FIRE LOOP B FAULT", colour: "a", isMainMsg: 1), var eng2FireDetFault = warning.new(msg: "ENG 2 FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var eng2LoopAFault = warning.new(msg: "ENG 2 FIRE LOOP A FAULT", colour: "a", isMainMsg: 1), var eng2LoopBFault = warning.new(msg: "ENG 2 FIRE LOOP B FAULT", colour: "a", isMainMsg: 1), var apuFireDetFault = warning.new(msg: "APU FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1), var apuLoopAFault = warning.new(msg: "APU FIRE LOOP A FAULT", colour: "a", isMainMsg: 1), var apuLoopBFault = warning.new(msg: "APU FIRE LOOP B FAULT", colour: "a", isMainMsg: 1), var crgFwdFireDetFault = warning.new(msg: "FWD CRG DET FAULT", colour: "a", isMainMsg: 1), var crgAftFireDetFault = warning.new(msg: "AFT CRG DET FAULT", colour: "a", isMainMsg: 1), # Radios var hf1Emitting = warning.new(msg: "COM HF 1 EMITTING", colour: "a", aural: 1, light: 1, isMainMsg: 1), var hf2Emitting = warning.new(msg: "COM HF 2 EMITTING", colour: "a", aural: 1, light: 1, isMainMsg: 1), # Recall var recallNormal = warning.new(msg: " ", colour: "g", isMainMsg: 1), var recallNormal1 = warning.new(msg: " ", colour: "g", isMainMsg: 1), var recallNormal2 = warning.new(msg: " NORMAL", colour: "g", isMainMsg: 1), ]); var configmemos = std.Vector.new([ var toMemoLine1 = warning.new(msg: "T.O AUTO BRK.....MAX", colour: "c", isMemo: 1), var toMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1), var toMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1), var toMemoLine4 = warning.new(msg: " FLAPS........T.O", colour: "c", isMemo: 1), var toMemoLine5 = warning.new(msg: " T.O CONFIG..TEST", colour: "c", isMemo: 1), var ldgMemoLine1 = warning.new(msg: "LDG LDG GEAR......DN", colour: "c", isMemo: 1), var ldgMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1), var ldgMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1), var ldgMemoLine4 = warning.new(msg: " FLAPS.......FULL", colour: "c", isMemo: 1), ]); var leftmemos = std.Vector.new([ var company_alert = warning.new(msg: "COMPANY ALERT" ), # Not yet implemented, buzzer sound var refuelg = warning.new(msg: "REFUELG" ), var irs_in_align = warning.new(msg: "IRS IN ALIGN" ), var gnd_splrs = warning.new(msg: "GND SPLRS ARMED" ), var seatbelts = warning.new(msg: "SEAT BELTS" ), var nosmoke = warning.new(msg: "NO SMOKING" ), var strobe_lt_off = warning.new(msg: "STROBE LT OFF" ), var outr_tk_fuel_xfrd = warning.new(msg: "OUTR TK FUEL XFRD" ), var fob_3T = warning.new(msg: "FOB BELOW 3T" ), var gpws_flap_mode_off = warning.new(msg: "GPWS FLAP MODE OFF" ), var atc_datalink_stby = warning.new(msg: "ATC DATALINK STBY" ), # Not yet implemented var company_datalink_stby = warning.new(msg: "COMPANY DATALINK STBY"), # Not yet implemented ]); # Right E/WD var specialLines = std.Vector.new([ var to_inhibit = memo.new(msg: "T.O. INHIBIT", colour: "m"), var ldg_inhibit = memo.new(msg: "LDG INHIBIT", colour: "m"), var land_asap_r = memo.new(msg: "LAND ASAP", colour: "r"), var land_asap_a = memo.new(msg: "LAND ASAP", colour: "a"), var ap_off = memo.new(msg: "AP OFF", colour: "r"), var athr_off = memo.new(msg: "A/THR OFF", colour: "a") ]); var secondaryFailures = std.Vector.new([ var secondary_bleed = memo.new(msg: "•AIR BLEED", colour: "a"), # Not yet implemented var secondary_press = memo.new(msg: "•CAB PRESS", colour: "a"), # Not yet implemented var secondary_vent = memo.new(msg: "•AVNCS VENT", colour: "a"), # Not yet implemented var secondary_elec = memo.new(msg: "•ELEC", colour: "a"), # Not yet implemented var secondary_hyd = memo.new(msg: "•HYD", colour: "a"), # Not yet implemented var secondary_fuel = memo.new(msg: "•FUEL", colour: "a"), # Not yet implemented var secondary_cond = memo.new(msg: "•AIR COND", colour: "a"), # Not yet implemented var secondary_brake = memo.new(msg: "•BRAKES", colour: "a"), # Not yet implemented var secondary_wheel = memo.new(msg: "•WHEEL", colour: "a"), # Not yet implemented var secondary_fctl = memo.new(msg: "•F/CTL", colour: "a") # Not yet implemented ]); var memos = std.Vector.new([ var spd_brk = memo.new(msg: "SPEED BRK" ), var park_brk = memo.new(msg: "PARK BRK" ), var ptu = memo.new(msg: "HYD PTU" ), var rat = memo.new(msg: "RAT OUT" ), var emer_gen = memo.new(msg: "EMER GEN" ), var ram_air = memo.new(msg: "RAM AIR ON" ), var nw_strg_disc = memo.new(msg: "NW STRG DISC"), var ignition = memo.new(msg: "IGNITION" ), var cabin_ready = memo.new(msg: "CABIN READY" ), # Not yet implemented var pred_ws_off = memo.new(msg: "PRED W/S OFF"), # Not yet implemented var terr_stby = memo.new(msg: "TERR STBY" ), # Not yet implemented var tcas_stby = memo.new(msg: "TCAS STBY" ), # Not yet implemented var acars_call = memo.new(msg: "ACARS CALL" ), # Not yet implemented var company_call = memo.new(msg: "COMPANY CALL"), var satcom_alert = memo.new(msg: "SATCOM ALERT"), # Not yet implemented var acars_msg = memo.new(msg: "ACARS MSG" ), # Not yet implemented var company_msg = memo.new(msg: "COMPANY MSG" ), # Not yet implemented var eng_aice = memo.new(msg: "ENG A.ICE" ), var wing_aice = memo.new(msg: "WING A.ICE" ), var ice_not_det = memo.new(msg: "ICE NOT DET" ), # Not yet implemented var hi_alt = memo.new(msg: "HI ALT" ), # Not yet implemented var apu_avail = memo.new(msg: "APU AVAIL" ), var apu_bleed = memo.new(msg: "APU BLEED" ), var ldg_lt = memo.new(msg: "LDG LT" ), var brk_fan = memo.new(msg: "BRK FAN" ), var audio3_xfrd = memo.new(msg: "AUDIO 3 XFRD"), # Not yet implemented var switchg_pnl = memo.new(msg: "SWITCHG PNL" ), # Not yet implemented var gpws_flap3 = memo.new(msg: "GPWS FLAP 3" ), var hf_data_ovrd = memo.new(msg: "HF DATA OVRD"), # Not yet implemented var hf_voice = memo.new(msg: "HF VOICE" ), # Not yet implemented var acars_stby = memo.new(msg: "ACARS STBY" ), # Not yet implemented var vhf3_voice = memo.new(msg: "VHF3 VOICE" ), var auto_brk_lo = memo.new(msg: "AUTO BRK LO" ), var auto_brk_med = memo.new(msg: "AUTO BRK MED"), var auto_brk_max = memo.new(msg: "AUTO BRK MAX"), var auto_brk_off = memo.new(msg: "AUTO BRK OFF"), # Not yet implemented var man_ldg_elev = memo.new(msg: "MAN LDG ELEV"), # Not yet implemented var ctr_tk_feedg = memo.new(msg: "CTR TK FEEDG"), var fuelx = memo.new(msg: "FUEL X FEED" ) ]); var clearWarnings = std.Vector.new(); # Status SD page var statusLim = std.Vector.new([ var min_rat_spd = status.new(msg: "MIN RAT SPD.....140 KT", colour: "c"), # Not yet implemented var max_spd_gear = status.new(msg: "MAX SPD........280/.67", colour: "c"), # Not yet implemented var max_spd_rev = status.new(msg: "MAX SPD........300/.78", colour: "c"), # Not yet implemented var buffet_rev = status.new(msg: " •IF BUFFET :", colour: "w"), # Not yet implemented var max_spd_rev_buf = status.new(msg: "MAX SPD.............240", colour: "c"), # Not yet implemented var max_spd_fctl = status.new(msg: "MAX SPD........320/.77", colour: "c"), # Not yet implemented var max_spd_fctl2 = status.new(msg: "MAX SPD.........300 KT", colour: "c"), # Not yet implemented var max_spd_gr_door = status.new(msg: "MAX SPD 250/.60", colour: "c"), # Not yet implemented var max_alt_press = status.new(msg: "MAX FL : 100/MEA", colour: "c"), # Not yet implemented var gravity_fuel = status.new(msg: "-PROC:GRAVTY FUEL FEEDING", colour: "c"), # Not yet implemented var gear_kp_dn = status.new(msg: "L/G............KEEP DOWN", colour: "c"), # Not yet implemented var park_brk_only = status.new(msg: "PARK BRK ONLY", colour: "c"), # Not yet implemented var park_brk_only = status.new(msg: "MAX BRK PR........1000PSI", colour: "c"), # Not yet implemented var fuel_gravity = status.new(msg: "FUEL GRAVTY FEED", colour: "c"), # Not yet implemented var fctl_manvr = status.new(msg: "MANOEUVER WITH CARE", colour: "c"), # Not yet implemented var fctl_spdbrk_care = status.new(msg: "USE SPD BRK WITH CARE", colour: "c"), # Not yet implemented var fctl_spdbrk_dont = status.new(msg: "SPD BRK......DO NOT USE", colour: "c"), # Not yet implemented var fctl_rud_care = status.new(msg: "RUD WITH CARE ABV 160KT", colour: "c"), # Not yet implemented var eng_thr_changes = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented var avoid_neg_g_fac = status.new(msg: "AVOID NEGATIVE G FACTOR", colour: "c"), # Not yet implemented var avoid_icing = status.new(msg: "AVOID ICING CONDITONS", colour: "c"), # Not yet implemented var severe_icing = status.new(msg: " IF A/C ICING SEVERE :", colour: "w"), # Not yet implemented, a319 only var severe_icing_2 = status.new(msg: "MIN SPD ALPHA PROT", colour: "c"), # Not yet implemented, a319 only var avoid_thr_chg = status.new(msg: "AVOID THR CHANGES", colour: "c"), # Not yet implemented, iae only var avoid_thr_chg_2 = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented, iae only var avoid_adv_cond = status.new(msg: "AVOID ADVERSE CONDITIONS", colour: "c"), # Not yet implemented, iae only var atc_com_voice = status.new(msg: "ATC COM VOICE ONLY", colour: "c") # Not yet implemented, iae only ]); var statusApprProc = std.Vector.new([ var dual_hyd_b_g = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented var dual_hyd_b_g_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_b_g_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented var dual_hyd_b_g_4 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_b_g_5 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented var dual_hyd_b_g_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented var dual_hyd_b_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented var dual_hyd_b_y_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_b_y_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented var dual_hyd_b_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_b_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented var dual_hyd_b_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented var dual_hyd_g_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented var dual_hyd_g_y_2 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_b_y_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented var dual_hyd_g_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented var dual_hyd_g_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented var dual_hyd_g_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented var single_hyd_b = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented var single_hyd_b_2 = status.new(msg: " •IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented var single_hyd_b_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented var single_hyd_g = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented var single_hyd_g_2 = status.new(msg: " •IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented var single_hyd_g_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented var single_hyd_g_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented var single_hyd_y = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented var single_hyd_y_2 = status.new(msg: " •IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented var single_hyd_y_3 = status.new(msg: "-YELLOW ENG 1 PUMP....ON", colour: "c"), # Not yet implemented var single_hyd_y_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented var avionics_smk = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var avionics_smk_2 = status.new(msg: " •BEFORE L/G EXTENSION :", colour: "w"), # Not yet implemented var avionics_smk_2 = status.new(msg: "-GEN 2...............ON", colour: "c"), # Not yet implemented var avionics_smk_4 = status.new(msg: "-EMER ELEC GEN1 LINE ON", colour: "c"), # Not yet implemented var ths_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var ths_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented var ths_stuck_3 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented var ths_stuck_4 = status.new(msg: " •IF MAN TRIM NOT AVAIL:", colour: "w"), # Not yet implemented var ths_stuck_5 = status.new(msg: " •WHEN CONF3 AND VAPP :", colour: "w"), # Not yet implemented var ths_stuck_6 = status.new(msg: "-L/G.................DN", colour: "c"), # Not yet implemented var flap_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var flap_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented var flap_stuck_3 = status.new(msg: "-FLAPS...KEEP CONF FULL", colour: "c"), # Not yet implemented var flap_stuck_4 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented var flap_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented var slat_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var slat_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 1", colour: "c"), # Not yet implemented var slat_stuck_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented var slat_stuck_4 = status.new(msg: "-CTR TK PUMPS.......OFF", colour: "c"), # Not yet implemented var slat_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented var slat_stuck_6 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented var fctl_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var fctl_proc_2 = status.new(msg: " •IF BUFFET:", colour: "w"), # Not yet implemented var fctl_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented var fctl_proc_4 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented var fctl_proc_5 = status.new(msg: "-AT 1000FT AGL:L/G...DN", colour: "c"), # Not yet implemented var rev_unlc_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented var rev_unlc_proc_2 = status.new(msg: " •IF BUFFET:", colour: "w"), # Not yet implemented var rev_unlc_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented var rev_unlc_proc_4 = status.new(msg: "-APPR SPD : VREF + 55KT", colour: "c"), # Not yet implemented var rev_unlc_proc_5 = status.new(msg: "-APPR SPD : VREF + 60KT", colour: "c"), # Not yet implemented var rev_unlc_proc_6 = status.new(msg: "-RUD TRIM.......5 DEG R", colour: "c"), # Not yet implemented var rev_unlc_proc_7 = status.new(msg: "-RUD TRIM.......5 DEG L", colour: "c"), # Not yet implemented var rev_unlc_proc_8 = status.new(msg: "-ATHR...............OFF", colour: "c"), # Not yet implemented var rev_unlc_proc_9 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented var rev_unlc_proc_10 = status.new(msg: " •WHEN LDG ASSURED:", colour: "w"), # Not yet implemented var rev_unlc_proc_11 = status.new(msg: "-L/G...............DOWN", colour: "c"), # Not yet implemented var rev_unlc_proc_12 = status.new(msg: " •AT 800FT AGL:", colour: "w"), # Not yet implemented var rev_unlc_proc_13 = status.new(msg: "-TARGET SPD : VREF+40KT", colour: "c"), # Not yet implemented var rev_unlc_proc_14 = status.new(msg: "-TARGET SPD : VREF+45KT", colour: "c"), # Not yet implemented var thr_lvr_flt = status.new(msg: "APPR PROC THR LEVER", colour: "a"), # Not yet implemented var thr_lvr_flt_2 = status.new(msg: "-AUTOLAND...........USE", colour: "c"), # Not yet implemented var thr_lvr_flt_3 = status.new(msg: " •IF AUTOLAND NOT USED:", colour: "w"), # Not yet implemented var thr_lvr_flt_4 = status.new(msg: " •AT 500FT AGL :", colour: "w"), # Not yet implemented var thr_lvr_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented var thr_lvr_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c"), # Not yet implemented var fuel_ctl_flt = status.new(msg: "APPR PROC FUEL CTL FAULT", colour: "a"), # Not yet implemented var fuel_ctl_flt_2 = status.new(msg: "REV 1........DO NOT USE", colour: "w"), # Not yet implemented var fuel_ctl_flt_3 = status.new(msg: "REV 2........DO NOT USE", colour: "w"), # Not yet implemented var fuel_ctl_flt_4 = status.new(msg: " •AFTER TOUCHDOWN:", colour: "w"), # Not yet implemented var fuel_ctl_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented var fuel_ctl_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c") # Not yet implemented ]); var statusProc = std.Vector.new(); var statusInfo = std.Vector.new(); var statusCancelled = std.Vector.new(); var statusInop = std.Vector.new(); var statusMaintenance = std.Vector.new(); # hack thrust lock message: var msgSave = athr_lock.msg;