legoboyvdlp R
c95912fa8b
ATSU: add server switching for METAR server; add ATIS subsystem. However it is not yet connected to MCDU. That comes next week.
2020-10-16 21:37:30 +01:00
legoboyvdlp R
2e5736860c
Show DC BAT in XX when the battery switches are off, hence the BCL aren't powered
2020-10-15 17:58:49 +01:00
legoboyvdlp R
293270f57e
ECAM warnings for the GEN 1 / 2 fault
2020-10-14 18:08:18 +01:00
legoboyvdlp R
68593890bf
Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2
2020-10-14 15:32:58 +01:00
legoboyvdlp R
aed192c7ae
Same thing for APU
2020-10-14 15:13:24 +01:00
legoboyvdlp R
6a8f13aeb4
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 13:51:30 +01:00
legoboyvdlp R
117f0256f8
Electrical: GCU should be powered by PMG or by DC BAT bus. Therefore, you can control with GEN pb sw if you have PMG volts _or_ if you have DC BAT. Also, disc power is on DC BAT, not DC ESS, even though indication is on ESS. Typically weird Airbus
2020-10-14 00:32:24 +01:00
legoboyvdlp R
59c092a5bd
IDG improvements:
...
1) restrict disconnection with underspeed condition (14%)
2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero.
3) Generator comes online at 52% N2 (4730 RPM)
4) Wider range of acceptable frequencies per AMM
5) Gen faults latch -- allows for potential restoration upon reset of the generator switch
6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 23:53:15 +01:00
legoboyvdlp R
473b85d106
Fix pushbutton sound volume; fix lower ecam typo. Prepare to add static inverter fault
2020-10-13 21:45:48 +01:00
legoboyvdlp R
8107bb73f5
New OH panel pushbutton sound
2020-10-13 20:50:22 +01:00
legoboyvdlp R
ed49a64199
Last set of arrows
2020-10-12 19:29:31 +01:00
legoboyvdlp R
01af5caad3
Bottom arrow
2020-10-12 19:09:02 +01:00
legoboyvdlp R
df3ac8ed33
Arrowssss
2020-10-11 20:13:06 +01:00
legoboyvdlp R
202fe2b3d0
Better schedules (thanks Octal!)
2020-10-11 19:28:13 +01:00
legoboyvdlp R
e1bf8e972f
Add non-linear pitch scale to PFD.
2020-10-11 17:45:28 +01:00
legoboyvdlp R
207c24c430
PFD: move the X X and = =
2020-10-11 16:56:03 +01:00
legoboyvdlp R
3a64392d51
New PFD non-linear pitch scale
2020-10-11 14:19:05 +01:00
Josh Davidson
433fe4ca0e
Control: Refactor cockpit elevator trim clickspots to properly control the trim, fixes #150
2020-10-10 20:23:41 -04:00
legoboyvdlp R
53e46ae8d2
Add IDG guards
2020-10-10 21:01:24 +01:00
legoboyvdlp R
46f810b48b
Bugfix -- hide rather than show the stall warning alpha bars
2020-10-10 20:33:51 +01:00
legoboyvdlp R
78e4597ff2
Ground reference bar on PFD should obscure the altitude window. Even if its annoying.
2020-10-10 20:28:20 +01:00
legoboyvdlp R
b02cc4e61f
Hide all FAC warnings on PFD when FAC1+2 failed, replace with SPD LIM red alert
2020-10-10 20:20:24 +01:00
legoboyvdlp R
0829f51377
SPD LIM displayed on captain's PFD if there is a dual FAC failure
2020-10-10 19:50:10 +01:00
legoboyvdlp R
66eb7daf31
Fuel flow should not be zero!
2020-10-10 17:43:03 +01:00
legoboyvdlp R
3528bd1262
Better clipping on full flap
2020-10-10 14:15:36 +01:00
legoboyvdlp R
59b157ce98
Slats animated
2020-10-10 14:03:42 +01:00
legoboyvdlp R
14606bb9e4
But I animated the flaps
2020-10-09 21:10:07 +01:00
legoboyvdlp R
00a6e9fd46
I dislike inkscape clipping. Just saying.
2020-10-09 20:50:46 +01:00
legoboyvdlp R
079db179f9
improve the SVG for the flap indicator
2020-10-09 20:00:02 +01:00
legoboyvdlp R
9baf68144f
And IAE2
2020-10-08 22:10:46 +01:00
legoboyvdlp R
56caefcf62
Better alignment (#maths) on the dots
2020-10-08 22:08:20 +01:00
legoboyvdlp R
fb64d15afc
Revise schedule mathematically
2020-10-08 21:25:00 +01:00
legoboyvdlp R
c107d02774
Upper ECAM: flap indicator animated
2020-10-08 21:21:45 +01:00
legoboyvdlp R
2dbc526f59
Restore development file
2020-10-08 20:13:18 +01:00
legoboyvdlp R
b13ed84cc2
Nasal changes
2020-10-07 18:32:54 +01:00
Matthew Maring
3641c7680d
Fix pfd speed bug
2020-10-07 00:54:10 -04:00
legoboyvdlp R
24cf10b032
Fix managed speed: it should target the entered VAPP if set in the MCDU
2020-10-05 19:40:30 +01:00
legoboyvdlp R
f9aa957083
more typo fix
2020-10-05 19:30:49 +01:00
legoboyvdlp R
e1279ce24e
Typo fix
2020-10-05 19:22:38 +01:00
legoboyvdlp R
16df254d13
Transfer much of managed speed loop to nodes or variables -- much faster!
2020-10-05 19:18:10 +01:00
legoboyvdlp R
1cbf30e638
To use <<load flightplan>> you'll have to use >= 2020.1.3, it doesn't work reliably before that
2020-10-04 20:32:57 +01:00
legoboyvdlp R
23dabc4b67
Formatting
2020-10-04 15:25:29 +01:00
legoboyvdlp R
2b6e1520e3
Improve rudder trim / clock code to be faster / use no getprop or setprop
2020-10-04 15:18:22 +01:00
legoboyvdlp R
b9f2593c82
Fix bug with wind component in simbrief parser
2020-10-03 16:59:06 +01:00
legoboyvdlp R
8000651176
Merge branch 'mcdukgs' into dev
2020-10-03 16:50:42 +01:00
legoboyvdlp R
8793cdda35
Fix Simbrief parser to respect Simbrief weight option
2020-10-03 16:48:31 +01:00
legoboyvdlp R
3d046eea30
Corect very serious error in the block / fuel calculations
2020-10-03 12:34:29 +01:00
legoboyvdlp R
1b9f31c726
MCDU: stop calling getprop(page) literally dozens of times when a button is pushed. In addition, we switch more stuff to PTS. Slowly getting faster!
2020-10-03 10:59:47 +01:00
legoboyvdlp R
6dce8486d5
Remove un-needed variable
2020-10-03 10:33:38 +01:00
legoboyvdlp R
830617bebc
FMA: update Nasal to be more efficient, remove all getprop, logic changes so that things go faster
2020-10-03 10:29:57 +01:00
