diff --git a/Models/Instruments/Lower-ECAM/Lower-ECAM.nas b/Models/Instruments/Lower-ECAM/Lower-ECAM.nas index cc0dc20c..f0786a8b 100644 --- a/Models/Instruments/Lower-ECAM/Lower-ECAM.nas +++ b/Models/Instruments/Lower-ECAM/Lower-ECAM.nas @@ -43,6 +43,7 @@ LBS2KGS = 0.4535924; # Fetch Nodes var acconfig_weight_kgs = props.globals.getNode("/systems/acconfig/options/weight-kgs", 1); var elapsed_sec = props.globals.getNode("/sim/time/elapsed-sec", 1); +var rate = props.globals.getNode("/systems/acconfig/options/lecam-rate", 1); var autoconfig_running = props.globals.getNode("/systems/acconfig/autoconfig-running", 1); var lighting_du4 = props.globals.getNode("/controls/lighting/DU/du4", 1); var ecam_page = props.globals.getNode("/ECAM/Lower/page", 1); @@ -115,43 +116,6 @@ var cargobulk_pos = props.globals.getNode("/sim/model/door-positions/cargobulk/p var cargofwd_pos = props.globals.getNode("/sim/model/door-positions/cargofwd/position-norm", 1); var cargoaft_pos = props.globals.getNode("/sim/model/door-positions/cargoaft/position-norm", 1); -# Electrical nodes -var apu_volts = props.globals.getNode("/systems/electrical/sources/apu/output-volt", 1); -var apu_hz = props.globals.getNode("/systems/electrical/sources/apu/output-hertz", 1); -var gen_apu = props.globals.getNode("/systems/electrical/relay/apu-glc/contact-pos", 1); -var switch_bat1 = props.globals.getNode("/controls/electrical/switches/bat-1", 1); -var switch_bat2 = props.globals.getNode("/controls/electrical/switches/bat-2", 1); -var bat1_amps = props.globals.getNode("/systems/electrical/sources/bat-1/amps", 1); -var bat2_amps = props.globals.getNode("/systems/electrical/sources/bat-2/amps", 1); -var bat1_volts = props.globals.getNode("/systems/electrical/sources/bat-1/volt", 1); -var bat2_volts = props.globals.getNode("/systems/electrical/sources/bat-2/volt", 1); -var bat1_fault = props.globals.getNode("/systems/electrical/light/bat-1-fault", 1); -var bat2_fault = props.globals.getNode("/systems/electrical/light/bat-2-fault", 1); -var bat1_direction = props.globals.getNode("/systems/electrical/sources/bat-1/direction", 1); -var bat2_direction = props.globals.getNode("/systems/electrical/sources/bat-2/direction", 1); -var emerGenVolts = props.globals.getNode("/systems/electrical/relay/emer-glc/output", 1); -var emerGenHz = props.globals.getNode("/systems/electrical/sources/emer-gen/output-hertz", 1); -var tr1_volts = props.globals.getNode("/systems/electrical/relay/tr-contactor-1/output", 1); -var tr2_volts = props.globals.getNode("/systems/electrical/relay/tr-contactor-2/output", 1); -var tr1_amps = props.globals.getNode("/systems/electrical/relay/tr-contactor-1/output-amp", 1); -var tr2_amps = props.globals.getNode("/systems/electrical/relay/tr-contactor-2/output-amp", 1); -var switch_emer_gen = props.globals.getNode("/systems/electrical/sources/emer-gen/output-volt", 1); -var switch_gen1 = props.globals.getNode("/controls/electrical/switches/gen-1", 1); -var switch_gen2 = props.globals.getNode("/controls/electrical/switches/gen-2", 1); -var gen1_volts = props.globals.getNode("/systems/electrical/sources/idg-1/output-volt", 1); -var gen2_volts = props.globals.getNode("/systems/electrical/sources/idg-2/output-volt", 1); -var gen1_hz = props.globals.getNode("/systems/electrical/sources/idg-1/output-hertz", 1); -var gen2_hz = props.globals.getNode("/systems/electrical/sources/idg-2/output-hertz", 1); -var ext_volts = props.globals.getNode("/systems/electrical/sources/ext/output-volt", 1); -var ext_hz = props.globals.getNode("/systems/electrical/sources/ext/output-hertz", 1); -var galleyshed = props.globals.getNode("/systems/electrical/some-electric-thingie/galley-shed", 1); -var switch_galley = props.globals.getNode("/controls/electrical/switches/galley", 1); -var switch_ac_ess_feed = props.globals.getNode("/controls/electrical/switches/ac-ess-feed", 1); -var tr1_fault = props.globals.getNode("/systems/failures/electrical/tr-1", 1); -var tr2_fault = props.globals.getNode("/systems/failures/electrical/tr-2", 1); -var essTrVolt = props.globals.getNode("/systems/electrical/relay/dc-ess-feed-tr/output", 1); -var essTrAmp = props.globals.getNode("/systems/electrical/relay/dc-ess-feed-tr/output-amp", 1); - # Hydraulic var blue_psi = 0; var green_psi = 0; @@ -266,12 +230,12 @@ var canvas_lowerECAM_base = { if (systems.ELEC.Bus.ac2.getValue() >= 110) { if (du4_offtime.getValue() + 3 < elapsedtime) { - if (gear0_wow.getValue() == 1) { + if (gear0_wow.getValue()) { if (autoconfig_running.getValue() != 1 and du4_test.getValue() != 1) { du4_test.setValue(1); du4_test_amount.setValue(math.round((rand() * 5 ) + 35, 0.1)); du4_test_time.setValue(elapsedtime); - } else if (autoconfig_running.getValue() == 1 and du4_test.getValue() != 1) { + } else if (autoconfig_running.getValue() and du4_test.getValue() != 1) { du4_test.setValue(1); du4_test_amount.setValue(math.round((rand() * 5 ) + 35, 0.1)); du4_test_time.setValue(elapsedtime - 30); @@ -556,7 +520,7 @@ var canvas_lowerECAM_base = { me["UTCh"].setText(sprintf("%02d", hour.getValue())); me["UTCm"].setText(sprintf("%02d", minute.getValue())); - if (acconfig_weight_kgs.getValue() == 1) { + if (acconfig_weight_kgs.getValue()) { me["GW"].setText(sprintf("%s", math.round(math.round(gw.getValue() * LBS2KGS, 100)))); me["GW-weight-unit"].setText("KG"); } else { @@ -579,7 +543,7 @@ var canvas_lowerECAM_apu = { }, update: func() { # Avail and Flap Open - if (apu_flap.getValue() == 1) { + if (apu_flap.getValue()) { me["APUFlapOpen"].show(); } else { me["APUFlapOpen"].hide(); @@ -598,19 +562,19 @@ var canvas_lowerECAM_apu = { } # APU Gen - if (apu_volts.getValue() >= 110) { + if (systems.ELEC.Source.APU.volts.getValue() >= 110) { me["APUGenVolt"].setColor(0.0509,0.7529,0.2941); } else { me["APUGenVolt"].setColor(0.7333,0.3803,0); } - if (apu_hz.getValue() > 380) { + if (systems.ELEC.Source.APU.hertz.getValue() > 380) { me["APUGenHz"].setColor(0.0509,0.7529,0.2941); } else { me["APUGenHz"].setColor(0.7333,0.3803,0); } - if (systems.APUNodes.Controls.master.getValue() == 1 or apu_rpm.getValue() >= 94.9) { + if (systems.APUNodes.Controls.master.getValue() or apu_rpm.getValue() >= 94.9) { me["APUGenbox"].show(); me["APUGenHz"].show(); me["APUGenVolt"].show(); @@ -628,24 +592,24 @@ var canvas_lowerECAM_apu = { me["text3732"].hide(); } - if ((apu_rpm.getValue() > 94.9) and (gen_apu.getValue() == 1)) { + if ((apu_rpm.getValue() > 94.9) and (systems.ELEC.Source.APU.contact.getValue())) { me["APUGenOnline"].show(); } else { me["APUGenOnline"].hide(); } - if ((systems.APUNodes.Controls.master.getValue() == 0) or ((systems.APUNodes.Controls.master.getValue() == 1) and (gen_apu.getValue() == 1) and (apu_rpm.getValue() > 94.9))) { + if ((systems.APUNodes.Controls.master.getValue() == 0) or ((systems.APUNodes.Controls.master.getValue()) and (systems.ELEC.Source.APU.contact.getValue()) and (apu_rpm.getValue() > 94.9))) { me["APUGentext"].setColor(0.8078,0.8039,0.8078); - } else if ((systems.APUNodes.Controls.master.getValue() == 1) and (gen_apu.getValue() == 0) and (apu_rpm.getValue() < 94.9)) { + } else if ((systems.APUNodes.Controls.master.getValue()) and (systems.ELEC.Source.APU.contact.getValue() == 0) and (apu_rpm.getValue() < 94.9)) { me["APUGentext"].setColor(0.7333,0.3803,0); } me["APUGenLoad"].setText(sprintf("%s", math.round(apu_load.getValue()))); - me["APUGenVolt"].setText(sprintf("%s", math.round(apu_volts.getValue()))); - me["APUGenHz"].setText(sprintf("%s", math.round(apu_hz.getValue()))); + me["APUGenVolt"].setText(sprintf("%s", math.round(systems.ELEC.Source.APU.volts.getValue()))); + me["APUGenHz"].setText(sprintf("%s", math.round(systems.ELEC.Source.APU.hertz.getValue()))); # APU Bleed - if (systems.ADIRS.Operating.adr[0].getValue() and (systems.APUNodes.Controls.bleed.getValue() == 1 or bleedapu.getValue() > 0)) { + if (systems.ADIRS.Operating.adr[0].getValue() and (systems.APUNodes.Controls.bleed.getValue() or bleedapu.getValue() > 0)) { me["APUBleedPSI"].setColor(0.0509,0.7529,0.2941); me["APUBleedPSI"].setText(sprintf("%s", math.round(bleedapu.getValue()))); } else { @@ -670,7 +634,7 @@ var canvas_lowerECAM_apu = { # APU N and EGT - if (systems.APUNodes.Controls.master.getValue() == 1) { + if (systems.APUNodes.Controls.master.getValue()) { me["APUN"].setColor(0.0509,0.7529,0.2941); me["APUN"].setText(sprintf("%s", math.round(apu_rpm.getValue() or 0))); me["APUEGT"].setColor(0.0509,0.7529,0.2941); @@ -872,7 +836,7 @@ var canvas_lowerECAM_bleed = { if (bmc1working.getValue()) { var precooler_temp = precooler1_temp.getValue(); me["BLEED-Precooler-1-Outlet-Temp"].setText(sprintf("%s", math.round(precooler_temp, 5))); - if (eng_valve1_cmd.getValue() == 1 and (precooler_temp < 150 or precooler1_ovht.getValue())) { + if (eng_valve1_cmd.getValue() and (precooler_temp < 150 or precooler1_ovht.getValue())) { me["BLEED-Precooler-1-Outlet-Temp"].setColor(0.7333,0.3803,0); } else { me["BLEED-Precooler-1-Outlet-Temp"].setColor(0.0509,0.7529,0.2941); @@ -886,7 +850,7 @@ var canvas_lowerECAM_bleed = { if (bmc2working.getValue()) { var precooler_temp = precooler2_temp.getValue(); me["BLEED-Precooler-2-Outlet-Temp"].setText(sprintf("%s", math.round(precooler_temp, 5))); - if (eng_valve2_cmd.getValue() == 1 and (precooler_temp < 150 or precooler2_ovht.getValue())) { + if (eng_valve2_cmd.getValue() and (precooler_temp < 150 or precooler2_ovht.getValue())) { me["BLEED-Precooler-2-Outlet-Temp"].setColor(0.7333,0.3803,0); } else { me["BLEED-Precooler-2-Outlet-Temp"].setColor(0.0509,0.7529,0.2941); @@ -904,7 +868,7 @@ var canvas_lowerECAM_bleed = { } # WING ANTI ICE - if (switch_wing_aice.getValue() == 1) { + if (switch_wing_aice.getValue()) { me["BLEED-Anti-Ice-Left"].show(); me["BLEED-Anti-Ice-Right"].show(); } else { @@ -1016,7 +980,7 @@ var canvas_lowerECAM_bleed = { me["BLEED-Ram-Air"].setColor(0.0509,0.7529,0.2941); me["BLEED-Ram-Air"].setColorFill(0.0509,0.7529,0.2941); me["BLEED-Ram-Air-connection"].hide(); - } elsif (systems.PNEU.Valves.ramAir.getValue() == 1) { + } elsif (systems.PNEU.Valves.ramAir.getValue()) { me["BLEED-Ram-Air"].setRotation(0); if (pts.Gear.wow[1].getValue()) { me["BLEED-Ram-Air"].setColor(0.7333,0.3803,0); @@ -1118,7 +1082,7 @@ var canvas_lowerECAM_crz = { me["Oil1"].setText(sprintf("%2.1f", oil_qt1_actual.getValue())); me["Oil2"].setText(sprintf("%2.1f", oil_qt2_actual.getValue())); - if (acconfig_weight_kgs.getValue() == 1) { + if (acconfig_weight_kgs.getValue()) { me["Fused-weight-unit"].setText("KG"); me["FUsed1"].setText(sprintf("%s", math.round(fuel_used_lbs1.getValue() * LBS2KGS, 10))); me["FUsed2"].setText(sprintf("%s", math.round(fuel_used_lbs2.getValue() * LBS2KGS, 10))); @@ -1298,7 +1262,7 @@ var canvas_lowerECAM_elec = { update: func() { # BAT1 - if (switch_bat1.getValue() == 0) { + if (systems.ELEC.Switch.bat1.getValue() == 0) { me["BAT1-OFF"].show(); me["BAT1-content"].hide(); me["BAT1-discharge"].hide(); @@ -1306,26 +1270,26 @@ var canvas_lowerECAM_elec = { } else { me["BAT1-OFF"].hide(); me["BAT1-content"].show(); - me["Bat1Ampere"].setText(sprintf("%s", math.round(bat1_amps.getValue()))); - me["Bat1Volt"].setText(sprintf("%s", math.round(bat1_volts.getValue()))); + me["Bat1Ampere"].setText(sprintf("%s", math.round(systems.ELEC.Source.Bat1.amps.getValue()))); + me["Bat1Volt"].setText(sprintf("%s", math.round(systems.ELEC.Source.Bat1.volt.getValue()))); - if (bat1_volts.getValue() >= 24.95 and bat1_volts.getValue() <= 31.05) { + if (systems.ELEC.Source.Bat1.volt.getValue() >= 24.95 and systems.ELEC.Source.Bat1.volt.getValue() <= 31.05) { me["Bat1Volt"].setColor(0.0509,0.7529,0.2941); } else { me["Bat1Volt"].setColor(0.7333,0.3803,0); } - if (bat1_amps.getValue() > 5) { + if (systems.ELEC.Source.Bat1.amps.getValue() > 5) { me["Bat1Ampere"].setColor(0.7333,0.3803,0); } else { me["Bat1Ampere"].setColor(0.0509,0.7529,0.2941); } - if (bat1_direction.getValue() == 0) { + if (systems.ELEC.Source.Bat1.direction.getValue() == 0) { me["BAT1-discharge"].hide(); me["BAT1-charge"].hide(); } else { - if (bat1_direction.getValue() == -1) { + if (systems.ELEC.Source.Bat1.direction.getValue() == -1) { me["BAT1-charge"].show(); me["BAT1-discharge"].hide(); } else { @@ -1335,14 +1299,14 @@ var canvas_lowerECAM_elec = { } } - if (bat1_fault.getValue() == 1 or bat1_volts.getValue() < 25 or bat1_volts.getValue() > 31 or bat1_amps.getValue() > 5) { + if (systems.ELEC.Light.bat1Fault.getValue() or systems.ELEC.Source.Bat1.volt.getValue() < 25 or systems.ELEC.Source.Bat1.volt.getValue() > 31 or systems.ELEC.Source.Bat1.amps.getValue() > 5) { me["BAT1-label"].setColor(0.7333,0.3803,0); } else { me["BAT1-label"].setColor(0.8078,0.8039,0.8078); } # BAT2 - if (switch_bat2.getValue() == 0) { + if (systems.ELEC.Switch.bat2.getValue() == 0) { me["BAT2-OFF"].show(); me["BAT2-content"].hide(); me["BAT2-discharge"].hide(); @@ -1350,26 +1314,26 @@ var canvas_lowerECAM_elec = { } else { me["BAT2-OFF"].hide(); me["BAT2-content"].show(); - me["Bat2Ampere"].setText(sprintf("%s", math.round(bat2_amps.getValue()))); - me["Bat2Volt"].setText(sprintf("%s", math.round(bat2_volts.getValue()))); + me["Bat2Ampere"].setText(sprintf("%s", math.round(systems.ELEC.Source.Bat2.amps.getValue()))); + me["Bat2Volt"].setText(sprintf("%s", math.round(systems.ELEC.Source.Bat2.volt.getValue()))); - if (bat2_volts.getValue() >= 24.95 and bat2_volts.getValue() <= 31.05) { + if (systems.ELEC.Source.Bat2.volt.getValue() >= 24.95 and systems.ELEC.Source.Bat2.volt.getValue() <= 31.05) { me["Bat2Volt"].setColor(0.0509,0.7529,0.2941); } else { me["Bat2Volt"].setColor(0.7333,0.3803,0); } - if (bat2_amps.getValue() > 5) { + if (systems.ELEC.Source.Bat2.amps.getValue() > 5) { me["Bat2Ampere"].setColor(0.7333,0.3803,0); } else { me["Bat2Ampere"].setColor(0.0509,0.7529,0.2941); } - if (bat2_direction.getValue() == 0) { + if (systems.ELEC.Source.Bat2.direction.getValue() == 0) { me["BAT2-discharge"].hide(); me["BAT2-charge"].hide(); } else { - if (bat2_direction.getValue() == -1) { + if (systems.ELEC.Source.Bat2.direction.getValue() == -1) { me["BAT2-charge"].show(); me["BAT2-discharge"].hide(); } else { @@ -1379,7 +1343,7 @@ var canvas_lowerECAM_elec = { } } - if (bat2_fault.getValue() == 1 or bat2_volts.getValue() < 25 or bat2_volts.getValue() > 31 or bat2_amps.getValue() > 5) { + if (systems.ELEC.Light.bat2Fault.getValue() or systems.ELEC.Source.Bat2.volt.getValue() < 25 or systems.ELEC.Source.Bat2.volt.getValue() > 31 or systems.ELEC.Source.Bat2.amps.getValue() > 5) { me["BAT2-label"].setColor(0.7333,0.3803,0); } else { me["BAT2-label"].setColor(0.8078,0.8039,0.8078); @@ -1387,8 +1351,8 @@ var canvas_lowerECAM_elec = { # TR1 # is only powered when ac1 has power - tr1_v = tr1_volts.getValue(); - tr1_a = tr1_amps.getValue(); + tr1_v = systems.ELEC.Source.tr1.outputVolt.getValue(); + tr1_a = systems.ELEC.Source.tr1.outputAmp.getValue(); me["TR1Volt"].setText(sprintf("%s", math.round(tr1_v))); me["TR1Ampere"].setText(sprintf("%s", math.round(tr1_a))); @@ -1413,8 +1377,8 @@ var canvas_lowerECAM_elec = { # TR2 # is only powered when ac2 has power - tr2_v = tr2_volts.getValue(); - tr2_a = tr2_amps.getValue(); + tr2_v = systems.ELEC.Source.tr2.outputVolt.getValue(); + tr2_a = systems.ELEC.Source.tr2.outputAmp.getValue(); me["TR2Volt"].setText(sprintf("%s", math.round(tr2_v))); me["TR2Ampere"].setText(sprintf("%s", math.round(tr2_a))); @@ -1438,8 +1402,8 @@ var canvas_lowerECAM_elec = { } # ESS TR - essTrvolts = essTrVolt.getValue(); - essTramps = essTrAmp.getValue(); + essTrvolts = systems.ELEC.Source.trEss.outputVoltRelay.getValue(); + essTramps = systems.ELEC.Source.trEss.outputAmpRelay.getValue(); if (systems.ELEC.Relay.essTrContactor.getValue()) { me["ESSTR-group"].show(); me["ESSTR-Volt"].setText(sprintf("%s", math.round(essTrvolts))); @@ -1467,7 +1431,7 @@ var canvas_lowerECAM_elec = { } # EMER GEN - if (switch_emer_gen.getValue() == 0) { + if (systems.ELEC.Source.EmerGen.volts.getValue() == 0) { me["EMERGEN-group"].hide(); me["ELEC-Line-Emergen-ESSTR"].hide(); me["ELEC-Line-Emergen-ESSTR-off"].show(); @@ -1478,22 +1442,22 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-Emergen-ESSTR-off"].hide(); me["EMERGEN-Label-off"].hide(); - me["EmergenVolt"].setText(sprintf("%s", math.round(emerGenVolts.getValue()))); - me["EmergenHz"].setText(sprintf("%s", math.round(emerGenHz.getValue()))); + me["EmergenVolt"].setText(sprintf("%s", math.round(systems.ELEC.Source.EmerGen.voltsRelay.getValue()))); + me["EmergenHz"].setText(sprintf("%s", math.round(systems.ELEC.Source.EmerGen.hertz.getValue()))); - if (emerGenVolts.getValue() > 120 or emerGenVolts.getValue() < 110 or emerGenHz.getValue() > 410 or emerGenHz.getValue() < 390) { + if (systems.ELEC.Source.EmerGen.voltsRelay.getValue() > 120 or systems.ELEC.Source.EmerGen.voltsRelay.getValue() < 110 or systems.ELEC.Source.EmerGen.hertz.getValue() > 410 or systems.ELEC.Source.EmerGen.hertz.getValue() < 390) { me["Emergen-Label"].setColor(0.7333,0.3803,0); } else { me["Emergen-Label"].setColor(0.8078,0.8039,0.8078); } - if (emerGenVolts.getValue() > 120 or emerGenVolts.getValue() < 110) { + if (systems.ELEC.Source.EmerGen.voltsRelay.getValue() > 120 or systems.ELEC.Source.EmerGen.voltsRelay.getValue() < 110) { me["EmergenVolt"].setColor(0.7333,0.3803,0); } else { me["EmergenVolt"].setColor(0.0509,0.7529,0.2941); } - if (emerGenHz.getValue() > 410 or emerGenHz.getValue() < 390) { + if (systems.ELEC.Source.EmerGen.hertz.getValue() > 410 or systems.ELEC.Source.EmerGen.hertz.getValue() < 390) { me["EmergenHz"].setColor(0.7333,0.3803,0); } else { me["EmergenHz"].setColor(0.0509,0.7529,0.2941); @@ -1531,7 +1495,7 @@ var canvas_lowerECAM_elec = { } # GEN1 - if (switch_gen1.getValue() == 0) { + if (systems.ELEC.Switch.gen1.getValue() == 0) { me["GEN1-content"].hide(); me["GEN1-off"].show(); if (systems.ELEC.Source.IDG1.gcrRelay.getValue()) { @@ -1549,12 +1513,12 @@ var canvas_lowerECAM_elec = { me["GEN1-content"].show(); me["GEN1-off"].hide(); # me["Gen1Load"].setText(sprintf("%s", math.round(gen1_load.getValue()))); - me["Gen1Volt"].setText(sprintf("%s", math.round(gen1_volts.getValue()))); + me["Gen1Volt"].setText(sprintf("%s", math.round(systems.ELEC.Source.IDG1.volts.getValue()))); - if (gen1_hz.getValue() == 0) { + if (systems.ELEC.Source.IDG1.hertz.getValue() == 0) { me["Gen1Hz"].setText(sprintf("XX")); } else { - me["Gen1Hz"].setText(sprintf("%s", math.round(gen1_hz.getValue()))); + me["Gen1Hz"].setText(sprintf("%s", math.round(systems.ELEC.Source.IDG1.hertz.getValue()))); } if (eng1_running.getValue() == 0) { @@ -1563,7 +1527,7 @@ var canvas_lowerECAM_elec = { me["GEN1-num-label"].setColor(0.8078,0.8039,0.8078); } - if (gen1_volts.getValue() > 120 or gen1_volts.getValue() < 110 or gen1_hz.getValue() > 410 or gen1_hz.getValue() < 390 or gen1_load.getValue() >= 110) { + if (systems.ELEC.Source.IDG1.volts.getValue() > 120 or systems.ELEC.Source.IDG1.volts.getValue() < 110 or systems.ELEC.Source.IDG1.hertz.getValue() > 410 or systems.ELEC.Source.IDG1.hertz.getValue() < 390 or gen1_load.getValue() >= 110) { me["GEN1-label"].setColor(0.7333,0.3803,0); } else { me["GEN1-label"].setColor(0.8078,0.8039,0.8078); @@ -1575,13 +1539,13 @@ var canvas_lowerECAM_elec = { me["Gen1Load"].setColor(0.0509,0.7529,0.2941); } - if (gen1_volts.getValue() > 120 or gen1_volts.getValue() < 110) { + if (systems.ELEC.Source.IDG1.volts.getValue() > 120 or systems.ELEC.Source.IDG1.volts.getValue() < 110) { me["Gen1Volt"].setColor(0.7333,0.3803,0); } else { me["Gen1Volt"].setColor(0.0509,0.7529,0.2941); } - if (gen1_hz.getValue() > 410 or gen1_hz.getValue() < 390) { + if (systems.ELEC.Source.IDG1.hertz.getValue() > 410 or systems.ELEC.Source.IDG1.hertz.getValue() < 390) { me["Gen1Hz"].setColor(0.7333,0.3803,0); } else { me["Gen1Hz"].setColor(0.0509,0.7529,0.2941); @@ -1589,7 +1553,7 @@ var canvas_lowerECAM_elec = { } # GEN2 - if (switch_gen2.getValue() == 0) { + if (systems.ELEC.Switch.gen2.getValue() == 0) { me["GEN2-content"].hide(); me["GEN2-off"].show(); if (systems.ELEC.Source.IDG2.gcrRelay.getValue()) { @@ -1607,11 +1571,11 @@ var canvas_lowerECAM_elec = { me["GEN2-content"].show(); me["GEN2-off"].hide(); # me["Gen2Load"].setText(sprintf("%s", math.round(gen2_load.getValue()))); - me["Gen2Volt"].setText(sprintf("%s", math.round(gen2_volts.getValue()))); - if (gen2_hz.getValue() == 0) { + me["Gen2Volt"].setText(sprintf("%s", math.round(systems.ELEC.Source.IDG2.volts.getValue()))); + if (systems.ELEC.Source.IDG2.hertz.getValue() == 0) { me["Gen2Hz"].setText(sprintf("XX")); } else { - me["Gen2Hz"].setText(sprintf("%s", math.round(gen2_hz.getValue()))); + me["Gen2Hz"].setText(sprintf("%s", math.round(systems.ELEC.Source.IDG2.hertz.getValue()))); } if (eng2_running.getValue() == 0) { @@ -1620,7 +1584,7 @@ var canvas_lowerECAM_elec = { me["GEN2-num-label"].setColor(0.8078,0.8039,0.8078); } - if (gen2_volts.getValue() > 120 or gen2_volts.getValue() < 110 or gen2_hz.getValue() > 410 or gen2_hz.getValue() < 390 or gen2_load.getValue() >= 110) { + if (systems.ELEC.Source.IDG2.volts.getValue() > 120 or systems.ELEC.Source.IDG2.volts.getValue() < 110 or systems.ELEC.Source.IDG2.hertz.getValue() > 410 or systems.ELEC.Source.IDG2.hertz.getValue() < 390 or gen2_load.getValue() >= 110) { me["GEN2-label"].setColor(0.7333,0.3803,0); } else { me["GEN2-label"].setColor(0.8078,0.8039,0.8078); @@ -1633,13 +1597,13 @@ var canvas_lowerECAM_elec = { } - if (gen2_volts.getValue() > 120 or gen2_volts.getValue() < 110) { + if (systems.ELEC.Source.IDG2.volts.getValue() > 120 or systems.ELEC.Source.IDG2.volts.getValue() < 110) { me["Gen2Volt"].setColor(0.7333,0.3803,0); } else { me["Gen2Volt"].setColor(0.0509,0.7529,0.2941); } - if (gen2_hz.getValue() > 410 or gen2_hz.getValue() < 390) { + if (systems.ELEC.Source.IDG2.hertz.getValue() > 410 or systems.ELEC.Source.IDG2.hertz.getValue() < 390) { me["Gen2Hz"].setColor(0.7333,0.3803,0); } else { me["Gen2Hz"].setColor(0.0509,0.7529,0.2941); @@ -1654,7 +1618,7 @@ var canvas_lowerECAM_elec = { me["APUGentext"].setColor(0.8078,0.8039,0.8078); } else { me["APU-border"].show(); - if (gen_apu.getValue() == 0) { + if (systems.ELEC.Source.APU.contact.getValue() == 0) { me["APU-content"].hide(); me["APUGEN-off"].show(); me["APUGentext"].setColor(0.7333,0.3803,0); @@ -1662,15 +1626,15 @@ var canvas_lowerECAM_elec = { me["APU-content"].show(); me["APUGEN-off"].hide(); # me["APUGenLoad"].setText(sprintf("%s", math.round(apu_load.getValue()))); - me["APUGenVolt"].setText(sprintf("%s", math.round(apu_volts.getValue()))); + me["APUGenVolt"].setText(sprintf("%s", math.round(systems.ELEC.Source.APU.volts.getValue()))); - if (apu_hz.getValue() == 0) { + if (systems.ELEC.Source.APU.hertz.getValue() == 0) { me["APUGenHz"].setText(sprintf("XX")); } else { - me["APUGenHz"].setText(sprintf("%s", math.round(apu_hz.getValue()))); + me["APUGenHz"].setText(sprintf("%s", math.round(systems.ELEC.Source.APU.hertz.getValue()))); } - if (apu_volts.getValue() > 120 or apu_volts.getValue() < 110 or apu_hz.getValue() > 410 or apu_hz.getValue() < 390 or apu_load.getValue() >= 110) { + if (systems.ELEC.Source.APU.volts.getValue() > 120 or systems.ELEC.Source.APU.volts.getValue() < 110 or systems.ELEC.Source.APU.hertz.getValue() > 410 or systems.ELEC.Source.APU.hertz.getValue() < 390 or apu_load.getValue() >= 110) { me["APUGentext"].setColor(0.7333,0.3803,0); } else { me["APUGentext"].setColor(0.8078,0.8039,0.8078); @@ -1682,13 +1646,13 @@ var canvas_lowerECAM_elec = { me["APUGenLoad"].setColor(0.0509,0.7529,0.2941); } - if (apu_volts.getValue() > 120 or apu_volts.getValue() < 110) { + if (systems.ELEC.Source.APU.volts.getValue() > 120 or systems.ELEC.Source.APU.volts.getValue() < 110) { me["APUGenVolt"].setColor(0.7333,0.3803,0); } else { me["APUGenVolt"].setColor(0.0509,0.7529,0.2941); } - if (apu_hz.getValue() > 410 or apu_hz.getValue() < 390) { + if (systems.ELEC.Source.APU.hertz.getValue() > 410 or systems.ELEC.Source.APU.hertz.getValue() < 390) { me["APUGenHz"].setColor(0.7333,0.3803,0); } else { me["APUGenHz"].setColor(0.0509,0.7529,0.2941); @@ -1702,29 +1666,29 @@ var canvas_lowerECAM_elec = { me["EXTPWR-group"].hide(); } else { me["EXTPWR-group"].show(); - me["ExtVolt"].setText(sprintf("%s", math.round(ext_volts.getValue()))); - me["ExtHz"].setText(sprintf("%s", math.round(ext_hz.getValue()))); + me["ExtVolt"].setText(sprintf("%s", math.round(systems.ELEC.Source.Ext.volts.getValue()))); + me["ExtHz"].setText(sprintf("%s", math.round(systems.ELEC.Source.Ext.hertz.getValue()))); - if (ext_hz.getValue() > 410 or ext_hz.getValue() < 390 or ext_volts.getValue() > 120 or ext_volts.getValue() < 110) { + if (systems.ELEC.Source.Ext.hertz.getValue() > 410 or systems.ELEC.Source.Ext.hertz.getValue() < 390 or systems.ELEC.Source.Ext.volts.getValue() > 120 or systems.ELEC.Source.Ext.volts.getValue() < 110) { me["EXTPWR-label"].setColor(0.7333,0.3803,0); } else { me["EXTPWR-label"].setColor(0.0509,0.7529,0.2941); } - if (ext_hz.getValue() > 410 or ext_hz.getValue() < 390) { + if (systems.ELEC.Source.Ext.hertz.getValue() > 410 or systems.ELEC.Source.Ext.hertz.getValue() < 390) { me["ExtHz"].setColor(0.7333,0.3803,0); } else { me["ExtHz"].setColor(0.0509,0.7529,0.2941); } - if (ext_volts.getValue() > 120 or ext_volts.getValue() < 110) { + if (systems.ELEC.Source.Ext.volts.getValue() > 120 or systems.ELEC.Source.Ext.volts.getValue() < 110) { me["ExtVolt"].setColor(0.7333,0.3803,0); } else { me["ExtVolt"].setColor(0.0509,0.7529,0.2941); } } - if (galleyshed.getValue()) { + if (systems.ELEC.SomeThing.galley.getValue()) { me["GalleyShed"].show(); } else { me["GalleyShed"].hide(); @@ -1781,25 +1745,25 @@ var canvas_lowerECAM_elec = { # Managment of the connecting lines between the components - if (getprop("/systems/electrical/relay/apu-glc/contact-pos") and (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos") or getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos"))) { + if (systems.ELEC.Relay.apuGlc.getValue() and (systems.ELEC.Relay.acTie1.getValue() or systems.ELEC.Relay.acTie2.getValue())) { me["APU-out"].show(); } else { me["APU-out"].hide(); } - if (getprop("/systems/electrical/relay/ext-epc/contact-pos") and (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos") or getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos"))) { + if (systems.ELEC.Relay.extEpc.getValue() and (systems.ELEC.Relay.acTie1.getValue() or systems.ELEC.Relay.acTie2.getValue())) { me["EXT-out"].show(); } else { me["EXT-out"].hide(); } - if (gen1_volts.getValue() >= 110 and getprop("/systems/electrical/relay/gen-1-glc/contact-pos")) { + if (systems.ELEC.Source.IDG1.volts.getValue() >= 110 and systems.ELEC.Relay.glc1.getValue()) { me["ELEC-Line-GEN1-AC1"].show(); } else { me["ELEC-Line-GEN1-AC1"].hide(); } - if (gen2_volts.getValue() >= 110 and getprop("/systems/electrical/relay/gen-2-glc/contact-pos")) { + if (systems.ELEC.Source.IDG2.volts.getValue() >= 110 and systems.ELEC.Relay.glc2.getValue()) { me["ELEC-Line-GEN2-AC2"].show(); } else { me["ELEC-Line-GEN2-AC2"].hide(); @@ -1817,38 +1781,38 @@ var canvas_lowerECAM_elec = { me["AC2-in"].hide(); } - if (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos") and getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos")) { + if (systems.ELEC.Relay.acTie1.getValue() and systems.ELEC.Relay.acTie2.getValue()) { me["ELEC-Line-APU-AC1"].show(); me["ELEC-Line-APU-EXT"].show(); me["ELEC-Line-EXT-AC2"].show(); } else { - if (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos")) { + if (systems.ELEC.Relay.acTie1.getValue()) { me["ELEC-Line-APU-AC1"].show(); } else { me["ELEC-Line-APU-AC1"].hide(); } - if ((getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos") and getprop("/systems/electrical/relay/apu-glc/contact-pos") and !getprop("/systems/electrical/relay/gen-2-glc/contact-pos")) or (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos") and getprop("/systems/electrical/relay/ext-epc/contact-pos") and !getprop("/systems/electrical/relay/gen-1-glc/contact-pos"))) { + if ((systems.ELEC.Relay.acTie2.getValue() and systems.ELEC.Relay.apuGlc.getValue() and !systems.ELEC.Relay.glc2.getValue()) or (systems.ELEC.Relay.acTie1.getValue() and systems.ELEC.Relay.extEpc.getValue() and !systems.ELEC.Relay.glc1.getValue())) { me["ELEC-Line-APU-EXT"].show(); } else { me["ELEC-Line-APU-EXT"].hide(); } - if (getprop("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos")) { + if (systems.ELEC.Relay.acTie2.getValue()) { me["ELEC-Line-EXT-AC2"].show(); } else { me["ELEC-Line-EXT-AC2"].hide(); } } - if (getprop("/systems/electrical/relay/ac-ess-feed-1/contact-pos") == 1) { + if (systems.ELEC.Relay.acEssFeed1.getValue()) { if (systems.ELEC.Bus.ac1.getValue() >= 110) { me["ELEC-Line-AC1-ACESS"].show(); } else { me["ELEC-Line-AC1-ACESS"].hide(); } me["ELEC-Line-AC2-ACESS"].hide(); - } elsif (getprop("/systems/electrical/relay/ac-ess-feed-2/contact-pos") == 1) { + } elsif (systems.ELEC.Relay.acEssFeed2.getValue()) { me["ELEC-Line-AC1-ACESS"].hide(); if (systems.ELEC.Bus.ac2.getValue() >= 110) { me["ELEC-Line-AC2-ACESS"].show(); @@ -1860,7 +1824,7 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-AC2-ACESS"].hide(); } - if (getprop("/systems/electrical/relay/tr-contactor-1/contact-pos") == 1) { + if (systems.ELEC.Relay.tr1Contactor.getValue()) { if (systems.ELEC.Bus.ac1.getValue() < 110) { me["ELEC-Line-AC1-TR1"].setColorFill(0.7333,0.3803,0); } else { @@ -1873,7 +1837,7 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-TR1-DC1"].hide(); } - if (getprop("/systems/electrical/relay/tr-contactor-2/contact-pos") == 1) { + if (systems.ELEC.Relay.tr2Contactor.getValue()) { if (systems.ELEC.Bus.ac2.getValue() < 110) { me["ELEC-Line-AC2-TR2"].setColorFill(0.7333,0.3803,0); } else { @@ -1886,25 +1850,25 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-TR2-DC2"].hide(); } - if (getprop("/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos")) { + if (systems.ELEC.Relay.dcTie1.getValue()) { me["ELEC-Line-DC1-DCESS_DCBAT"].show(); } else { me["ELEC-Line-DC1-DCESS_DCBAT"].hide(); } - if (getprop("/systems/electrical/relay/dc-ess-feed-bat/contact-pos")) { + if (systems.ELEC.Relay.dcEssFeedBat.getValue()) { me["ELEC-Line-DC1-DCESS"].show(); } else { me["ELEC-Line-DC1-DCESS"].hide(); } - if (getprop("/systems/electrical/relay/dc-ess-feed-bat/contact-pos") or getprop("/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos")) { + if (systems.ELEC.Relay.dcEssFeedBat.getValue() or systems.ELEC.Relay.dcTie1.getValue()) { me["ELEC-Line-DC1-DCBAT"].show(); } else { me["ELEC-Line-DC1-DCBAT"].hide(); } - if (getprop("/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos")) { + if (systems.ELEC.Relay.dcTie2.getValue()) { me["ELEC-Line-DC2-DCBAT"].show(); me["ELEC-Line-DC2-DCESS_DCBAT"].show(); } else { @@ -1912,7 +1876,7 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-DC2-DCESS_DCBAT"].hide(); } - if (getprop("/systems/electrical/relay/ac-ess-feed-emer-gen/contact-pos")) { + if (systems.ELEC.Relay.acEssEmerGenFeed.getValue()) { me["EMERGEN-out"].show(); me["ELEC-Line-Emergen-ESSTR"].show(); } else { @@ -1920,13 +1884,13 @@ var canvas_lowerECAM_elec = { me["ELEC-Line-Emergen-ESSTR"].hide(); } - if (systems.ELEC.Bus.acEss.getValue() >= 110 and !getprop("/systems/electrical/relay/ac-ess-feed-emer-gen/contact-pos") and (!getprop("/systems/electrical/relay/tr-contactor-1/contact-pos") or !getprop("/systems/electrical/relay/tr-contactor-2/contact-pos"))) { + if (systems.ELEC.Bus.acEss.getValue() >= 110 and !systems.ELEC.Relay.acEssEmerGenFeed.getValue() and (!systems.ELEC.Relay.tr1Contactor.getValue() or !systems.ELEC.Relay.tr2Contactor.getValue())) { me["ELEC-Line-ACESS-TRESS"].show(); } else { me["ELEC-Line-ACESS-TRESS"].hide(); } - if (getprop("/systems/electrical/relay/dc-ess-feed-tr/contact-pos")) { + if (systems.ELEC.Relay.essTrContactor.getValue()) { me["ELEC-Line-ESSTR-DCESS"].show(); } else { me["ELEC-Line-ESSTR-DCESS"].hide(); @@ -1989,7 +1953,7 @@ var canvas_lowerECAM_eng = { me["OilPSI2-needle"].setRotation((oil_psi2.getValue() + 90) * D2R); # Fuel Used - if (acconfig_weight_kgs.getValue() == 1) { + if (acconfig_weight_kgs.getValue()) { me["FUEL-used-1"].setText(sprintf("%s", math.round(fuel_used_lbs1.getValue() * LBS2KGS, 10))); me["FUEL-used-2"].setText(sprintf("%s", math.round(fuel_used_lbs2.getValue() * LBS2KGS, 10))); me["Fused-weight-unit"].setText("KG"); @@ -2303,7 +2267,7 @@ var canvas_lowerECAM_fctl = { if (elac1.getValue()) { me["elac1"].setColor(0.0509,0.7529,0.2941); me["path4249"].setColor(0.0509,0.7529,0.2941); - } else if ((elac1.getValue() == 0) or (elac1_fail.getValue() == 1)) { + } else if ((elac1.getValue() == 0) or (elac1_fail.getValue())) { me["elac1"].setColor(0.7333,0.3803,0); me["path4249"].setColor(0.7333,0.3803,0); } @@ -2311,7 +2275,7 @@ var canvas_lowerECAM_fctl = { if (elac2.getValue()) { me["elac2"].setColor(0.0509,0.7529,0.2941); me["path4249-3"].setColor(0.0509,0.7529,0.2941); - } else if ((elac2.getValue() == 0) or (elac2_fail.getValue() == 1)) { + } else if ((elac2.getValue() == 0) or (elac2_fail.getValue())) { me["elac2"].setColor(0.7333,0.3803,0); me["path4249-3"].setColor(0.7333,0.3803,0); } @@ -2319,7 +2283,7 @@ var canvas_lowerECAM_fctl = { if (sec1.getValue()) { me["sec1"].setColor(0.0509,0.7529,0.2941); me["path4249-3-6-7"].setColor(0.0509,0.7529,0.2941); - } else if ((sec1.getValue() == 0) or (sec1_fail.getValue() == 1)) { + } else if ((sec1.getValue() == 0) or (sec1_fail.getValue())) { me["sec1"].setColor(0.7333,0.3803,0); me["path4249-3-6-7"].setColor(0.7333,0.3803,0); } @@ -2327,7 +2291,7 @@ var canvas_lowerECAM_fctl = { if (sec2.getValue()) { me["sec2"].setColor(0.0509,0.7529,0.2941); me["path4249-3-6-7-5"].setColor(0.0509,0.7529,0.2941); - } else if ((sec2.getValue() == 0) or (sec2_fail.getValue() == 1)) { + } else if ((sec2.getValue() == 0) or (sec2_fail.getValue())) { me["sec2"].setColor(0.7333,0.3803,0); me["path4249-3-6-7-5"].setColor(0.7333,0.3803,0); } @@ -2335,7 +2299,7 @@ var canvas_lowerECAM_fctl = { if (sec3.getValue()) { me["sec3"].setColor(0.0509,0.7529,0.2941); me["path4249-3-6"].setColor(0.0509,0.7529,0.2941); - } else if ((sec3.getValue() == 0) or (sec3_fail.getValue() == 1)) { + } else if ((sec3.getValue() == 0) or (sec3_fail.getValue())) { me["sec3"].setColor(0.7333,0.3803,0); me["path4249-3-6"].setColor(0.7333,0.3803,0); } @@ -2407,7 +2371,6 @@ var canvas_lowerECAM_fuel = { update: func() { _weight_kgs = acconfig_weight_kgs.getValue(); - # if (getprop("/engines/engine[0]/n1-actual") < getprop("/controls/engines/idle-limit")) { if (eng1_n1.getValue() <= 18.8) { me["ENG1idFFlow"].setColor(0.7333,0.3803,0); me["FUEL-ENG-1-label"].setColor(0.7333,0.3803,0); @@ -2416,7 +2379,6 @@ var canvas_lowerECAM_fuel = { me["FUEL-ENG-1-label"].setColor(0.8078,0.8039,0.8078); } - # if (getprop("/engines/engine[1]/n1-actual") < getprop("/controls/engines/idle-limit")) { if (eng2_n1.getValue() <= 18.5) { me["ENG2idFFlow"].setColor(0.7333,0.3803,0); me["FUEL-ENG-2-label"].setColor(0.7333,0.3803,0); @@ -2455,7 +2417,7 @@ var canvas_lowerECAM_fuel = { # TODO use the valve prop and add amber if difference between eng master and valve # TODO add transition state - if (systems.FUEL.Valves.lpValve1.getValue() == 1) { + if (systems.FUEL.Valves.lpValve1.getValue()) { me["FUEL-ENG-Master-1"].setRotation(0); me["FUEL-ENG-Master-1"].setColor(0.0509,0.7529,0.2941); me["FUEL-ENG-Master-1"].setColorFill(0.0509,0.7529,0.2941); @@ -2469,7 +2431,7 @@ var canvas_lowerECAM_fuel = { # TODO use the valve prop and add amber if difference between eng master and valve # TODO add transition state - if (systems.FUEL.Valves.lpValve2.getValue() == 1) { + if (systems.FUEL.Valves.lpValve2.getValue()) { me["FUEL-ENG-Master-2"].setRotation(0); me["FUEL-ENG-Master-2"].setColor(0.0509,0.7529,0.2941); me["FUEL-ENG-Master-2"].setColorFill(0.0509,0.7529,0.2941); @@ -2609,7 +2571,7 @@ var canvas_lowerECAM_fuel = { if (systems.FUEL.Valves.transfer1.getValue() == 0) { me["FUEL-Left-Transfer"].hide(); } else { - if (systems.FUEL.Valves.transfer1.getValue() == 1) { + if (systems.FUEL.Valves.transfer1.getValue()) { me["FUEL-Left-Transfer"].setColor(0.0509,0.7529,0.2941); } else { me["FUEL-Left-Transfer"].setColor(0.7333,0.3803,0); @@ -2620,7 +2582,7 @@ var canvas_lowerECAM_fuel = { if (systems.FUEL.Valves.transfer2.getValue() == 0) { me["FUEL-Right-Transfer"].hide(); } else { - if (systems.FUEL.Valves.transfer2.getValue() == 1) { + if (systems.FUEL.Valves.transfer2.getValue()) { me["FUEL-Right-Transfer"].setColor(0.0509,0.7529,0.2941); } else { me["FUEL-Right-Transfer"].setColor(0.7333,0.3803,0); @@ -2635,13 +2597,13 @@ var canvas_lowerECAM_fuel = { } # APU - if (systems.FUEL.Valves.apu.getValue() == 1 and systems.APUNodes.Controls.master.getValue() and !systems.APUNodes.Controls.fire.getValue()) { + if (systems.FUEL.Valves.apu.getValue() and systems.APUNodes.Controls.master.getValue() and !systems.APUNodes.Controls.fire.getValue()) { me["FUEL-APU-label"].setColor(0.8078, 0.8039, 0.8078); me["FUEL-APU-line"].setColor(0.0509,0.7529,0.2941); me["FUEL-APU-arrow"].setColor(0.0509,0.7529,0.2941); me["FUEL-APU-line"].show(); me["FUEL-APU-arrow"].show(); - } elsif (systems.FUEL.Valves.apu.getValue() == 1 and (!systems.APUNodes.Controls.master.getValue() or systems.APUNodes.Controls.fire.getValue())) { + } elsif (systems.FUEL.Valves.apu.getValue() and (!systems.APUNodes.Controls.master.getValue() or systems.APUNodes.Controls.fire.getValue())) { me["FUEL-APU-label"].setColor(0.7333,0.3803,0); me["FUEL-APU-line"].setColor(0.7333,0.3803,0); me["FUEL-APU-arrow"].setColor(0.7333,0.3803,0); @@ -2887,37 +2849,37 @@ var canvas_lowerECAM_hyd = { } } - if (y_resv_lo_air_press.getValue() == 1) { + if (y_resv_lo_air_press.getValue()) { me["LO-AIR-PRESS-Yellow"].show(); } else { me["LO-AIR-PRESS-Yellow"].hide(); } - if (b_resv_lo_air_press.getValue() == 1) { + if (b_resv_lo_air_press.getValue()) { me["LO-AIR-PRESS-Blue"].show(); } else { me["LO-AIR-PRESS-Blue"].hide(); } - if (g_resv_lo_air_press.getValue() == 1) { + if (g_resv_lo_air_press.getValue()) { me["LO-AIR-PRESS-Green"].show(); } else { me["LO-AIR-PRESS-Green"].hide(); } - if (elec_pump_y_ovht.getValue() == 1) { + if (elec_pump_y_ovht.getValue()) { me["ELEC-OVHT-Yellow"].show(); } else { me["ELEC-OVHT-Yellow"].hide(); } - if (elec_pump_b_ovht.getValue() == 1) { + if (elec_pump_b_ovht.getValue()) { me["ELEC-OVHT-Blue"].show(); } else { me["ELEC-OVHT-Blue"].hide(); } - if (systems.HYD.Rat.position.getValue() == 1) { + if (systems.HYD.Rat.position.getValue()) { me["RAT-stowed"].hide(); me["RAT-not-stowed"].show(); } else { @@ -2925,19 +2887,19 @@ var canvas_lowerECAM_hyd = { me["RAT-not-stowed"].hide(); } - if (y_resv_ovht.getValue() == 1) { + if (y_resv_ovht.getValue()) { me["OVHT-Yellow"].show(); } else { me["OVHT-Yellow"].hide(); } - if (b_resv_ovht.getValue() == 1) { + if (b_resv_ovht.getValue()) { me["OVHT-Green"].show(); } else { me["OVHT-Green"].hide(); } - if (g_resv_ovht.getValue() == 1) { + if (g_resv_ovht.getValue()) { me["OVHT-Blue"].show(); } else { me["OVHT-Blue"].hide(); @@ -3593,13 +3555,13 @@ setlistener("sim/signals/fdm-initialized", func { lowerECAM_test = canvas_lowerECAM_test.new(group_test, "Aircraft/A320-family/Models/Instruments/Common/res/du-test.svg"); lowerECAM_update.start(); - if (getprop("/systems/acconfig/options/lecam-rate") > 1) { + if (rate.getValue() > 1) { l_rateApply(); } }); var l_rateApply = func { - lowerECAM_update.restart(0.05 * getprop("/systems/acconfig/options/lecam-rate")); + lowerECAM_update.restart(0.05 * rate.getValue()); } var lowerECAM_update = maketimer(0.05, func { diff --git a/Nasal/Systems/electrical.nas b/Nasal/Systems/electrical.nas index 81ba1126..6b95c723 100644 --- a/Nasal/Systems/electrical.nas +++ b/Nasal/Systems/electrical.nas @@ -17,38 +17,38 @@ var ELEC = { _timer2On: 0, EmerElec: props.globals.getNode("/systems/electrical/some-electric-thingie/emer-elec-config"), Bus: { - acEss: props.globals.getNode("systems/electrical/bus/ac-ess"), - acEssShed: props.globals.getNode("systems/electrical/bus/ac-ess-shed"), - ac1: props.globals.getNode("systems/electrical/bus/ac-1"), - ac2: props.globals.getNode("systems/electrical/bus/ac-2"), - dcBat: props.globals.getNode("systems/electrical/bus/dc-bat"), - dcEss: props.globals.getNode("systems/electrical/bus/dc-ess"), - dcEssShed: props.globals.getNode("systems/electrical/bus/dc-ess-shed"), - dc1: props.globals.getNode("systems/electrical/bus/dc-1"), - dc2: props.globals.getNode("systems/electrical/bus/dc-2"), - dcHot1: props.globals.getNode("systems/electrical/bus/dc-hot-1"), - dcHot2: props.globals.getNode("systems/electrical/bus/dc-hot-2"), + acEss: props.globals.getNode("/systems/electrical/bus/ac-ess"), + acEssShed: props.globals.getNode("/systems/electrical/bus/ac-ess-shed"), + ac1: props.globals.getNode("/systems/electrical/bus/ac-1"), + ac2: props.globals.getNode("/systems/electrical/bus/ac-2"), + dcBat: props.globals.getNode("/systems/electrical/bus/dc-bat"), + dcEss: props.globals.getNode("/systems/electrical/bus/dc-ess"), + dcEssShed: props.globals.getNode("/systems/electrical/bus/dc-ess-shed"), + dc1: props.globals.getNode("/systems/electrical/bus/dc-1"), + dc2: props.globals.getNode("/systems/electrical/bus/dc-2"), + dcHot1: props.globals.getNode("/systems/electrical/bus/dc-hot-1"), + dcHot2: props.globals.getNode("/systems/electrical/bus/dc-hot-2"), }, Fail: { - acEssBusFault: props.globals.getNode("systems/failures/electrical/ac-ess-bus"), - ac1BusFault: props.globals.getNode("systems/failures/electrical/ac-1-bus"), - ac2BusFault: props.globals.getNode("systems/failures/electrical/ac-2-bus"), - bat1Fault: props.globals.getNode("systems/failures/electrical/bat-1"), - bat2Fault: props.globals.getNode("systems/failures/electrical/bat-2"), - dcBatBusFault: props.globals.getNode("systems/failures/electrical/dc-bat-bus"), - dcEssBusFault: props.globals.getNode("systems/failures/electrical/dc-ess-bus"), - dc1BusFault: props.globals.getNode("systems/failures/electrical/dc-1-bus"), - dc2BusFault: props.globals.getNode("systems/failures/electrical/dc-2-bus"), - emerGenFault: props.globals.getNode("systems/failures/electrical/emer-gen"), - essTrFault: props.globals.getNode("systems/failures/electrical/ess-tr"), - gen1Fault: props.globals.getNode("systems/failures/electrical/gen-1"), - gen2Fault: props.globals.getNode("systems/failures/electrical/gen-2"), - genApuFault: props.globals.getNode("systems/failures/electrical/apu"), - idg1Fault: props.globals.getNode("systems/failures/electrical/idg-1"), # oil leak or low press - idg2Fault: props.globals.getNode("systems/failures/electrical/idg-2"), - statInvFault: props.globals.getNode("systems/failures/electrical/stat-inv"), - tr1Fault: props.globals.getNode("systems/failures/electrical/tr-1"), - tr2Fault: props.globals.getNode("systems/failures/electrical/tr-2"), + acEssBusFault: props.globals.getNode("/systems/failures/electrical/ac-ess-bus"), + ac1BusFault: props.globals.getNode("/systems/failures/electrical/ac-1-bus"), + ac2BusFault: props.globals.getNode("/systems/failures/electrical/ac-2-bus"), + bat1Fault: props.globals.getNode("/systems/failures/electrical/bat-1"), + bat2Fault: props.globals.getNode("/systems/failures/electrical/bat-2"), + dcBatBusFault: props.globals.getNode("/systems/failures/electrical/dc-bat-bus"), + dcEssBusFault: props.globals.getNode("/systems/failures/electrical/dc-ess-bus"), + dc1BusFault: props.globals.getNode("/systems/failures/electrical/dc-1-bus"), + dc2BusFault: props.globals.getNode("/systems/failures/electrical/dc-2-bus"), + emerGenFault: props.globals.getNode("/systems/failures/electrical/emer-gen"), + essTrFault: props.globals.getNode("/systems/failures/electrical/ess-tr"), + gen1Fault: props.globals.getNode("/systems/failures/electrical/gen-1"), + gen2Fault: props.globals.getNode("/systems/failures/electrical/gen-2"), + genApuFault: props.globals.getNode("/systems/failures/electrical/apu"), + idg1Fault: props.globals.getNode("/systems/failures/electrical/idg-1"), # oil leak or low press + idg2Fault: props.globals.getNode("/systems/failures/electrical/idg-2"), + statInvFault: props.globals.getNode("/systems/failures/electrical/stat-inv"), + tr1Fault: props.globals.getNode("/systems/failures/electrical/tr-1"), + tr2Fault: props.globals.getNode("/systems/failures/electrical/tr-2"), }, Generic: { adf: props.globals.initNode("/systems/electrical/outputs/adf", 0, "DOUBLE"), @@ -69,39 +69,86 @@ var ELEC = { turnCoordinator: props.globals.initNode("/systems/electrical/outputs/turn-coordinator", 0, "DOUBLE"), }, Light: { + bat1Fault: props.globals.getNode("/systems/electrical/light/bat-1-fault"), + bat2Fault: props.globals.getNode("/systems/electrical/light/bat-2-fault"), }, Misc: { }, Relay: { - essTrContactor: props.globals.getNode("systems/electrical/relay/dc-ess-feed-tr/contact-pos"), + acEssFeed1: props.globals.getNode("/systems/electrical/relay/ac-ess-feed-1/contact-pos"), + acEssFeed2: props.globals.getNode("/systems/electrical/relay/ac-ess-feed-2/contact-pos"), + acEssEmerGenFeed: props.globals.getNode("/systems/electrical/relay/ac-ess-feed-emer-gen/contact-pos"), + acTie1: props.globals.getNode("/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos"), + acTie2: props.globals.getNode("/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos"), + apuGlc: props.globals.getNode("/systems/electrical/relay/apu-glc/contact-pos"), + dcEssFeedBat: props.globals.getNode("/systems/electrical/relay/dc-ess-feed-bat/contact-pos"), + essTrContactor: props.globals.getNode("/systems/electrical/relay/dc-ess-feed-tr/contact-pos"), + extEpc: props.globals.getNode("/systems/electrical/relay/ext-epc/contact-pos"), + dcTie1: props.globals.getNode("/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos"), + dcTie2: props.globals.getNode("/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos"), + glc1: props.globals.getNode("/systems/electrical/relay/gen-1-glc/contact-pos"), + glc2: props.globals.getNode("/systems/electrical/relay/gen-2-glc/contact-pos"), + tr1Contactor: props.globals.getNode("/systems/electrical/relay/tr-contactor-1/contact-pos"), + tr2Contactor: props.globals.getNode("/systems/electrical/relay/tr-contactor-2/contact-pos"), }, SomeThing: { - emerGenSignal: props.globals.getNode("systems/electrical/some-electric-thingie/emer-gen-operate"), + emerGenSignal: props.globals.getNode("/systems/electrical/some-electric-thingie/emer-gen-operate"), + galley: props.globals.getNode("/systems/electrical/some-electric-thingie/galley-shed"), }, Source: { + APU: { + volts: props.globals.getNode("/systems/electrical/sources/apu/output-volt"), + hertz: props.globals.getNode("/systems/electrical/sources/apu/output-hertz"), + contact: props.globals.getNode("/systems/electrical/relay/apu-glc/contact-pos"), + }, Bat1: { - volt: props.globals.getNode("systems/electrical/sources/bat-1/volt"), - amps: props.globals.getNode("systems/electrical/sources/bat-1/amps"), - contact: props.globals.getNode("systems/electrical/sources/bat-1/contact"), - percent: props.globals.getNode("systems/electrical/sources/bat-1/percent"), - time: props.globals.getNode("systems/electrical/sources/bat-1/time"), + volt: props.globals.getNode("/systems/electrical/sources/bat-1/volt"), + amps: props.globals.getNode("/systems/electrical/sources/bat-1/amps"), + contact: props.globals.getNode("/systems/electrical/sources/bat-1/contact"), + percent: props.globals.getNode("/systems/electrical/sources/bat-1/percent"), + direction: props.globals.getNode("/systems/electrical/sources/bat-1/direction"), + time: props.globals.getNode("/systems/electrical/sources/bat-1/time"), }, Bat2: { - volt: props.globals.getNode("systems/electrical/sources/bat-2/volt"), - amps: props.globals.getNode("systems/electrical/sources/bat-2/amps"), - contact: props.globals.getNode("systems/electrical/sources/bat-2/contact"), - percent: props.globals.getNode("systems/electrical/sources/bat-2/percent"), - time: props.globals.getNode("systems/electrical/sources/bat-2/time"), + volt: props.globals.getNode("/systems/electrical/sources/bat-2/volt"), + amps: props.globals.getNode("/systems/electrical/sources/bat-2/amps"), + contact: props.globals.getNode("/systems/electrical/sources/bat-2/contact"), + percent: props.globals.getNode("/systems/electrical/sources/bat-2/percent"), + direction: props.globals.getNode("/systems/electrical/sources/bat-2/direction"), + time: props.globals.getNode("/systems/electrical/sources/bat-2/time"), + }, + EmerGen: { + volts: props.globals.getNode("/systems/electrical/sources/emer-gen/output-volt"), + hertz: props.globals.getNode("/systems/electrical/sources/emer-gen/output-hertz"), + }, + Ext: { + volts: props.globals.getNode("/systems/electrical/sources/ext/output-volt"), + voltsRelay: props.globals.getNode("/systems/electrical/relay/emer-glc/output"), + hertz: props.globals.getNode("/systems/electrical/sources/ext/output-hertz"), + }, + tr1: { + outputVolt: props.globals.getNode("/systems/electrical/relay/tr-contactor-1/output"), + outputAmp: props.globals.getNode("/systems/electrical/relay/tr-contactor-1/output-amp"), + }, + tr2: { + outputVolt: props.globals.getNode("/systems/electrical/relay/tr-contactor-2/output"), + outputAmp: props.globals.getNode("/systems/electrical/relay/tr-contactor-2/output-amp"), }, trEss: { - outputVolt: props.globals.getNode("systems/electrical/sources/tr-ess/output-volt"), - outputAmp: props.globals.getNode("systems/electrical/sources/tr-ess/output-amp"), + outputVolt: props.globals.getNode("/systems/electrical/sources/tr-ess/output-volt"), + outputAmp: props.globals.getNode("/systems/electrical/sources/tr-ess/output-amp"), + outputVoltRelay: props.globals.getNode("/systems/electrical/relay/dc-ess-feed-tr/output"), + outputAmpRelay: props.globals.getNode("/systems/electrical/relay/dc-ess-feed-tr/output-amp"), }, IDG1: { - gcrRelay: props.globals.getNode("systems/electrical/sources/idg-1/gcr-relay"), + gcrRelay: props.globals.getNode("/systems/electrical/sources/idg-1/gcr-relay"), + hertz: props.globals.getNode("/systems/electrical/sources/idg-1/output-hertz"), + volts: props.globals.getNode("/systems/electrical/sources/idg-1/output-volt"), }, IDG2: { - gcrRelay: props.globals.getNode("systems/electrical/sources/idg-1/gcr-relay"), + gcrRelay: props.globals.getNode("/systems/electrical/sources/idg-2/gcr-relay"), + hertz: props.globals.getNode("/systems/electrical/sources/idg-2/output-hertz"), + volts: props.globals.getNode("/systems/electrical/sources/idg-2/output-volt"), }, }, Switch: {