2019-10-14 16:48:35 +00:00
# A3XX Electronic Centralised Aircraft Monitoring System
# Copyright (c) 2019 Jonathan Redpath (legoboyvdlp)
# props.nas:
var dualFailNode = props.globals.initNode("/ECAM/dual-failure-enabled", 0, "BOOL");
2020-02-07 16:10:54 +00:00
var phaseNode = props.globals.getNode("ECAM/warning-phase", 1);
var apWarn = props.globals.getNode("it-autoflight/output/ap-warning", 1);
var athrWarn = props.globals.getNode("it-autoflight/output/athr-warning", 1);
var emerGen = props.globals.getNode("controls/electrical/switches/emer-gen", 1);
2019-10-14 16:48:35 +00:00
2020-02-07 16:10:54 +00:00
var fac1Node = props.globals.getNode("controls/fctl/switches/fac1", 1);
var state1Node = props.globals.getNode("engines/engine[0]/state", 1);
var state2Node = props.globals.getNode("engines/engine[1]/state", 1);
var wowNode = props.globals.getNode("fdm/jsbsim/position/wow", 1);
2020-04-17 22:41:36 +00:00
var apu_rpm = props.globals.getNode("engines/engine[2]/n1", 1);
2020-02-07 16:10:54 +00:00
var wing_pb = props.globals.getNode("controls/switches/wing", 1);
2020-04-14 17:07:01 +00:00
var apumaster = props.globals.getNode("controls/apu/master", 1);
2020-02-07 16:10:54 +00:00
var apu_bleedSw = props.globals.getNode("controls/pneumatic/switches/bleedapu", 1);
var gear = props.globals.getNode("gear/gear-pos-norm", 1);
var cutoff1 = props.globals.getNode("controls/engines/engine[0]/cutoff-switch", 1);
var cutoff2 = props.globals.getNode("controls/engines/engine[1]/cutoff-switch", 1);
2019-11-02 14:52:06 +00:00
var stallVoice = props.globals.initNode("/sim/sound/warnings/stall-voice", 0, "BOOL");
2020-02-07 16:10:54 +00:00
var engOpt = props.globals.getNode("options/eng", 1);
2019-10-29 15:19:43 +00:00
2019-10-14 16:48:35 +00:00
# local variables
2020-04-21 15:07:16 +00:00
var transmitFlag1 = 0;
var transmitFlag2 = 0;
2019-10-14 16:48:35 +00:00
var phaseVar = nil;
var dualFailFACActive = 1;
var emerConfigFACActive = 1;
2019-10-29 15:19:43 +00:00
var gear_agl_cur = nil;
2019-12-09 17:38:35 +00:00
var numberMinutes = nil;
var timeNow = nil;
var timer10secIRS = nil;
2020-03-17 13:08:07 +00:00
var altAlertInhibit = nil;
2020-03-18 12:30:00 +00:00
var alt200 = nil;
2020-03-17 13:08:07 +00:00
var alt750 = nil;
2020-03-17 19:56:01 +00:00
var bigThree = nil;
2019-12-09 17:38:35 +00:00
2019-10-14 16:48:35 +00:00
var messages_priority_3 = func {
phaseVar = phaseNode.getValue();
2019-11-02 14:52:06 +00:00
# Stall
# todo - altn law and emer cancel flipflops page 2440
2020-02-07 16:10:54 +00:00
if (phaseVar >= 5 and phaseVar <= 7 and (getprop("fdm/jsbsim/fcs/slat-pos-deg") <= 15 and (getprop("systems/navigation/adr/output/aoa-1") > 15 or getprop("systems/navigation/adr/output/aoa-2") > 15 or getprop("systems/navigation/adr/output/aoa-3") > 15)) or (getprop("fdm/jsbsim/fcs/slat-pos-deg") > 15 and (getprop("systems/navigation/adr/output/aoa-1") > 23 or getprop("systems/navigation/adr/output/aoa-2") > 23 or getprop("systems/navigation/adr/output/aoa-3") > 23))) {
2019-11-02 14:52:06 +00:00
stall.active = 1;
} else {
ECAM_controller.warningReset(stall);
}
if (stall.active) {
stallVoice.setValue(1);
} else {
stallVoice.setValue(0);
}
2020-02-07 16:10:54 +00:00
if ((phaseVar == 1 or (phaseVar >= 5 and phaseVar <= 7)) and getprop("systems/navigation/adr/output/overspeed")) {
2019-11-02 14:52:06 +00:00
overspeed.active = 1;
2020-02-07 16:10:54 +00:00
if (getprop("systems/navigation/adr/computation/overspeed-vmo") or getprop("systems/navigation/adr/computation/overspeed-mmo")) {
2019-11-02 14:52:06 +00:00
overspeedVMO.active = 1;
} else {
ECAM_controller.warningReset(overspeedVMO);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/navigation/adr/computation/overspeed-vle")) {
2019-11-02 14:52:06 +00:00
overspeedGear.active = 1;
} else {
ECAM_controller.warningReset(overspeedGear);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/navigation/adr/computation/overspeed-vfe")) {
2019-11-02 14:52:06 +00:00
overspeedFlap.active = 1;
overspeedFlap.msg = "-VFE................" ~ (systems.ADIRSnew.overspeedVFE.getValue() - 4);
} else {
2019-11-02 15:17:55 +00:00
ECAM_controller.warningReset(overspeedFlap);
2019-11-02 14:52:06 +00:00
overspeedFlap.msg = "-VFE................XXX";
}
} else {
ECAM_controller.warningReset(overspeed);
ECAM_controller.warningReset(overspeedVMO);
ECAM_controller.warningReset(overspeedGear);
ECAM_controller.warningReset(overspeedFlap);
overspeedFlap.msg = "-VFE................XXX";
}
# FCTL FLAPS NOT ZERO
2020-02-07 16:10:54 +00:00
if ((flap_not_zero.clearFlag == 0) and phaseVar == 6 and getprop("controls/flight/flap-lever") != 0 and getprop("instrumentation/altimeter/indicated-altitude-ft") > 22000) {
2019-10-14 16:48:35 +00:00
flap_not_zero.active = 1;
} else {
ECAM_controller.warningReset(flap_not_zero);
}
# ENG DUAL FAIL
if (phaseVar >= 5 and phaseVar <= 7 and dualFailNode.getBoolValue() and dualFail.clearFlag == 0) {
dualFail.active = 1;
} else {
ECAM_controller.warningReset(dualFail);
dualFailFACActive = 1; # reset FAC local variable
}
if (dualFail.active == 1) {
2020-02-07 16:10:54 +00:00
if (getprop("controls/engines/engine-start-switch") != 2 and dualFailModeSel.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
dualFailModeSel.active = 1;
} else {
ECAM_controller.warningReset(dualFailModeSel);
}
2020-02-07 16:10:54 +00:00
if (getprop("fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("fdm/jsbsim/fcs/throttle-lever[1]") > 0.01 and dualFailLevers.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
dualFailLevers.active = 1;
} else {
ECAM_controller.warningReset(dualFailLevers);
}
if (engOpt.getValue() == "IAE" and dualFailRelightSPD.clearFlag == 0) {
dualFailRelightSPD.active = 1;
} else {
ECAM_controller.warningReset(dualFailRelightSPD);
}
if (engOpt.getValue() != "IAE" and dualFailRelightSPDCFM.clearFlag == 0) {
dualFailRelightSPDCFM.active = 1;
} else {
ECAM_controller.warningReset(dualFailRelightSPDCFM);
}
if (emerGen.getValue() == 0 and dualFailElec.clearFlag == 0) {
dualFailElec.active = 1;
} else {
ECAM_controller.warningReset(dualFailElec);
}
if (dualFailRadio.clearFlag == 0) {
dualFailRadio.active = 1;
} else {
ECAM_controller.warningReset(dualFailRadio);
}
if (dualFailFACActive == 1 and dualFailFAC.clearFlag == 0) {
dualFailFAC.active = 1;
} else {
ECAM_controller.warningReset(dualFailFAC);
}
if (dualFailMasters.clearFlag == 0) {
dualFailRelight.active = 1; # assumption
dualFailMasters.active = 1;
} else {
ECAM_controller.warningReset(dualFailRelight);
ECAM_controller.warningReset(dualFailMasters);
}
if (dualFailSPDGD.clearFlag == 0) {
dualFailSuccess.active = 1; # assumption
dualFailSPDGD.active = 1;
} else {
ECAM_controller.warningReset(dualFailSuccess);
ECAM_controller.warningReset(dualFailSPDGD);
}
if (dualFailAPU.clearFlag == 0) {
dualFailAPU.active = 1;
} else {
ECAM_controller.warningReset(dualFailAPU);
}
if (dualFailAPUwing.clearFlag == 0 and apu_rpm.getValue() > 94.9 and wing_pb.getBoolValue()) {
dualFailAPUwing.active = 1;
} else {
ECAM_controller.warningReset(dualFailAPUwing);
}
if (dualFailAPUbleed.clearFlag == 0 and apu_rpm.getValue() > 94.9 and !apu_bleedSw.getBoolValue()) {
dualFailAPUbleed.active = 1;
} else {
ECAM_controller.warningReset(dualFailAPUbleed);
}
if (dualFailMastersAPU.clearFlag == 0) {
dualFailMastersAPU.active = 1;
} else {
ECAM_controller.warningReset(dualFailMastersAPU);
}
if (dualFailflap.clearFlag == 0) {
dualFailAPPR.active = 1; # assumption
dualFailflap.active = 1;
} else {
ECAM_controller.warningReset(dualFailAPPR);
ECAM_controller.warningReset(dualFailflap);
}
if (dualFailcabin.clearFlag == 0) {
dualFailcabin.active = 1;
} else {
ECAM_controller.warningReset(dualFailcabin);
}
if (dualFailrudd.clearFlag == 0) {
dualFailrudd.active = 1;
} else {
ECAM_controller.warningReset(dualFailrudd);
}
if (dualFailgear.clearFlag == 0 and gear.getValue() != 1) {
dualFail5000.active = 1; # according to doc
dualFailgear.active = 1;
} else {
ECAM_controller.warningReset(dualFailgear);
ECAM_controller.warningReset(dualFail5000);
}
if (dualFailfinalspeed.clearFlag == 0) {
dualFailfinalspeed.active = 1;
} else {
ECAM_controller.warningReset(dualFailfinalspeed);
}
if (dualFailmasteroff.clearFlag == 0 and (!cutoff1.getBoolValue() or !cutoff2.getBoolValue())) {
dualFailmasteroff.active = 1;
} else {
ECAM_controller.warningReset(dualFailmasteroff);
}
if (dualFailapuoff.clearFlag == 0 and apumaster.getBoolValue()) {
dualFailapuoff.active = 1;
} else {
ECAM_controller.warningReset(dualFailapuoff);
}
if (dualFailevac.clearFlag == 0) {
dualFailevac.active = 1;
} else {
ECAM_controller.warningReset(dualFailevac);
}
if (dualFailbatt.clearFlag == 0) { # elec power lost when batt goes off anyway I guess
dualFailbatt.active = 1;
dualFailtouch.active = 1;
} else {
ECAM_controller.warningReset(dualFailbatt);
ECAM_controller.warningReset(dualFailtouch);
}
} else {
ECAM_controller.warningReset(dualFailModeSel);
ECAM_controller.warningReset(dualFailLevers);
ECAM_controller.warningReset(dualFailRelightSPD);
ECAM_controller.warningReset(dualFailRelightSPDCFM);
ECAM_controller.warningReset(dualFailElec);
ECAM_controller.warningReset(dualFailRadio);
ECAM_controller.warningReset(dualFailFAC);
ECAM_controller.warningReset(dualFailRelight);
ECAM_controller.warningReset(dualFailMasters);
ECAM_controller.warningReset(dualFailSuccess);
ECAM_controller.warningReset(dualFailSPDGD);
ECAM_controller.warningReset(dualFailAPU);
ECAM_controller.warningReset(dualFailAPUwing);
ECAM_controller.warningReset(dualFailAPUbleed);
ECAM_controller.warningReset(dualFailMastersAPU);
ECAM_controller.warningReset(dualFailAPPR);
ECAM_controller.warningReset(dualFailflap);
ECAM_controller.warningReset(dualFailcabin);
ECAM_controller.warningReset(dualFailrudd);
ECAM_controller.warningReset(dualFailgear);
ECAM_controller.warningReset(dualFail5000);
ECAM_controller.warningReset(dualFailfinalspeed);
ECAM_controller.warningReset(dualFailmasteroff);
ECAM_controller.warningReset(dualFailapuoff);
ECAM_controller.warningReset(dualFailevac);
ECAM_controller.warningReset(dualFailbatt);
ECAM_controller.warningReset(dualFailtouch);
}
# ENG FIRE
2020-02-07 16:10:54 +00:00
if ((eng1FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine1/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) or (eng1FireGnevacBat.clearFlag == 0 and getprop("systems/fire/engine1/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7))) {
2019-10-14 16:48:35 +00:00
eng1Fire.active = 1;
} else {
ECAM_controller.warningReset(eng1Fire);
}
2020-02-07 16:10:54 +00:00
if ((eng2FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine2/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) or (eng2FireGnevacBat.clearFlag == 0 and getprop("systems/fire/engine2/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7))) {
2019-10-14 16:48:35 +00:00
eng2Fire.active = 1;
} else {
ECAM_controller.warningReset(eng2Fire);
}
2020-02-07 16:10:54 +00:00
if (apuFireMaster.clearFlag == 0 and getprop("systems/fire/apu/warning-active")) {
2019-10-14 16:48:35 +00:00
apuFire.active = 1;
} else {
ECAM_controller.warningReset(apuFire);
}
if (eng1Fire.active == 1) {
if (phaseVar >= 5 and phaseVar <= 7) {
2020-02-07 16:10:54 +00:00
if (eng1FireFllever.clearFlag == 0 and getprop("fdm/jsbsim/fcs/throttle-lever[0]") > 0.01) {
2019-10-14 16:48:35 +00:00
eng1FireFllever.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFllever);
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlmaster.clearFlag == 0 and getprop("controls/engines/engine[0]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireFlmaster.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlmaster);
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlPB.clearFlag == 0 and getprop("controls/engines/engine[0]/fire-btn") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireFlPB.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlPB);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fire/engine1/agent1-timer") != 0 and getprop("systems/fire/engine1/agent1-timer") != 99) {
eng1FireFlAgent1Timer.msg = " -AGENT AFT " ~ getprop("systems/fire/engine1/agent1-timer") ~ " S...DISCH";
2019-10-14 16:48:35 +00:00
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlAgent1.clearFlag == 0 and getprop("controls/engines/engine[0]/fire-btn") == 1 and !getprop("systems/fire/engine1/disch1") and getprop("systems/fire/engine1/agent1-timer") != 0 and getprop("systems/fire/engine1/agent1-timer") != 99) {
2019-10-14 16:48:35 +00:00
eng1FireFlAgent1Timer.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlAgent1Timer);
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlAgent1.clearFlag == 0 and !getprop("systems/fire/engine1/disch1") and (getprop("systems/fire/engine1/agent1-timer") == 0 or getprop("systems/fire/engine1/agent1-timer") == 99)) {
2019-10-14 16:48:35 +00:00
eng1FireFlAgent1.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlAgent1);
}
if (eng1FireFlATC.clearFlag == 0) {
eng1FireFlATC.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlATC);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fire/engine1/agent2-timer") != 0 and getprop("systems/fire/engine1/agent2-timer") != 99) {
eng1FireFl30Sec.msg = "•IF FIRE AFTER " ~ getprop("systems/fire/engine1/agent2-timer") ~ " S:";
2019-10-14 16:48:35 +00:00
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine1/disch1") and !getprop("systems/fire/engine1/disch2") and getprop("systems/fire/engine1/agent2-timer") > 0) {
2019-10-14 16:48:35 +00:00
eng1FireFl30Sec.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFl30Sec);
}
2020-02-07 16:10:54 +00:00
if (eng1FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine1/disch1") and !getprop("systems/fire/engine1/disch2")) {
2019-10-14 16:48:35 +00:00
eng1FireFlAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFlAgent2);
}
} else {
ECAM_controller.warningReset(eng1FireFllever);
ECAM_controller.warningReset(eng1FireFlmaster);
ECAM_controller.warningReset(eng1FireFlPB);
ECAM_controller.warningReset(eng1FireFlAgent1);
ECAM_controller.warningReset(eng1FireFlATC);
ECAM_controller.warningReset(eng1FireFl30Sec);
ECAM_controller.warningReset(eng1FireFlAgent2);
}
if (phaseVar < 5 or phaseVar > 7) {
2020-02-07 16:10:54 +00:00
if (eng1FireGnlever.clearFlag == 0 and getprop("fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
2019-10-14 16:48:35 +00:00
eng1FireGnlever.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnlever);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnparkbrk.clearFlag == 0 and getprop("controls/gear/brake-parking") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireGnstopped.active = 1;
eng1FireGnparkbrk.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnstopped);
ECAM_controller.warningReset(eng1FireGnparkbrk);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnmaster.clearFlag == 0 and getprop("controls/engines/engine[0]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireGnmaster.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnmaster);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnPB.clearFlag == 0 and getprop("controls/engines/engine[0]/fire-btn") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireGnPB.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnPB);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnAgent1.clearFlag == 0 and !getprop("systems/fire/engine1/disch1")) {
2019-10-14 16:48:35 +00:00
eng1FireGnAgent1.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnAgent1);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnAgent2.clearFlag == 0 and !getprop("systems/fire/engine1/disch2")) {
2019-10-14 16:48:35 +00:00
eng1FireGnAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnAgent2);
}
2020-02-07 16:10:54 +00:00
if (eng1FireGnmaster2.clearFlag == 0 and getprop("controls/engines/engine[1]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng1FireGnmaster2.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnmaster2);
}
if (eng1FireGnATC.clearFlag == 0) {
eng1FireGnATC.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnATC);
}
if (eng1FireGncrew.clearFlag == 0) {
eng1FireGncrew.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGncrew);
}
if (eng1FireGnevacSw.clearFlag == 0) {
eng1FireGnevac.active = 1;
eng1FireGnevacSw.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnevac);
ECAM_controller.warningReset(eng1FireGnevacSw);
}
2020-04-17 22:41:36 +00:00
if (eng1FireGnevacApu.clearFlag == 0 and getprop("controls/apu/master") and getprop("engines/engine[2]/n1") > 99) {
2019-10-14 16:48:35 +00:00
eng1FireGnevacApu.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnevacApu);
}
if (eng1FireGnevacBat.clearFlag == 0 and (systems.ELEC.Switch.bat1.getValue() or systems.ELEC.Switch.bat2.getValue())) {
eng1FireGnevacBat.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnevacBat);
}
} else {
ECAM_controller.warningReset(eng1FireGnlever);
ECAM_controller.warningReset(eng1FireGnstopped);
ECAM_controller.warningReset(eng1FireGnparkbrk);
ECAM_controller.warningReset(eng1FireGnmaster);
ECAM_controller.warningReset(eng1FireGnPB);
ECAM_controller.warningReset(eng1FireGnAgent1);
ECAM_controller.warningReset(eng1FireGnAgent2);
ECAM_controller.warningReset(eng1FireGnmaster2);
ECAM_controller.warningReset(eng1FireGnATC);
ECAM_controller.warningReset(eng1FireGncrew);
ECAM_controller.warningReset(eng1FireGnevac);
ECAM_controller.warningReset(eng1FireGnevacSw);
ECAM_controller.warningReset(eng1FireGnevacApu);
ECAM_controller.warningReset(eng1FireGnevacBat);
}
} else {
ECAM_controller.warningReset(eng1FireFllever);
ECAM_controller.warningReset(eng1FireFlmaster);
ECAM_controller.warningReset(eng1FireFlPB);
ECAM_controller.warningReset(eng1FireFlAgent1);
ECAM_controller.warningReset(eng1FireFlATC);
ECAM_controller.warningReset(eng1FireFl30Sec);
ECAM_controller.warningReset(eng1FireFlAgent2);
ECAM_controller.warningReset(eng1FireGnlever);
ECAM_controller.warningReset(eng1FireGnstopped);
ECAM_controller.warningReset(eng1FireGnparkbrk);
ECAM_controller.warningReset(eng1FireGnmaster);
ECAM_controller.warningReset(eng1FireGnPB);
ECAM_controller.warningReset(eng1FireGnAgent1);
ECAM_controller.warningReset(eng1FireGnAgent2);
ECAM_controller.warningReset(eng1FireGnmaster2);
ECAM_controller.warningReset(eng1FireGnATC);
ECAM_controller.warningReset(eng1FireGncrew);
ECAM_controller.warningReset(eng1FireGnevac);
ECAM_controller.warningReset(eng1FireGnevacSw);
ECAM_controller.warningReset(eng1FireGnevacApu);
ECAM_controller.warningReset(eng1FireGnevacBat);
}
if (eng2Fire.active == 1) {
if (phaseVar >= 5 and phaseVar <= 7) {
2020-02-07 16:10:54 +00:00
if (eng2FireFllever.clearFlag == 0 and getprop("fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
2019-10-14 16:48:35 +00:00
eng2FireFllever.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFllever);
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlmaster.clearFlag == 0 and getprop("controls/engines/engine[1]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireFlmaster.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlmaster);
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlPB.clearFlag == 0 and getprop("controls/engines/engine[1]/fire-btn") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireFlPB.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlPB);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fire/engine2/agent1-timer") != 0 and getprop("systems/fire/engine2/agent1-timer") != 99) {
eng2FireFlAgent1Timer.msg = " -AGENT AFT " ~ getprop("systems/fire/engine2/agent1-timer") ~ " S...DISCH";
2019-10-14 16:48:35 +00:00
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlAgent1.clearFlag == 0 and getprop("controls/engines/engine[1]/fire-btn") == 1 and !getprop("systems/fire/engine2/disch1") and getprop("systems/fire/engine2agent1-timer") != 0 and getprop("systems/fire/engine2/agent1-timer") != 99) {
2019-10-14 16:48:35 +00:00
eng2FireFlAgent1Timer.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlAgent1Timer);
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlAgent1.clearFlag == 0 and !getprop("systems/fire/engine2/disch1") and (getprop("systems/fire/engine2/agent1-timer") == 0 or getprop("systems/fire/engine2/agent1-timer") == 99)) {
2019-10-14 16:48:35 +00:00
eng2FireFlAgent1.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlAgent1);
}
if (eng2FireFlATC.clearFlag == 0) {
eng2FireFlATC.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlATC);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fire/engine2/agent2-timer") != 0 and getprop("systems/fire/engine2/agent2-timer") != 99) {
eng2FireFl30Sec.msg = "•IF FIRE AFTER " ~ getprop("systems/fire/engine2/agent2-timer") ~ " S:";
2019-10-14 16:48:35 +00:00
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine2/disch1") and !getprop("systems/fire/engine2/disch2") and getprop("systems/fire/engine2/agent2-timer") > 0) {
2019-10-14 16:48:35 +00:00
eng2FireFl30Sec.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFl30Sec);
}
2020-02-07 16:10:54 +00:00
if (eng2FireFlAgent2.clearFlag == 0 and getprop("systems/fire/engine2/disch1") and !getprop("systems/fire/engine2/disch2")) {
2019-10-14 16:48:35 +00:00
eng2FireFlAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFlAgent2);
}
} else {
ECAM_controller.warningReset(eng2FireFllever);
ECAM_controller.warningReset(eng2FireFlmaster);
ECAM_controller.warningReset(eng2FireFlPB);
ECAM_controller.warningReset(eng2FireFlAgent1);
ECAM_controller.warningReset(eng2FireFlATC);
ECAM_controller.warningReset(eng2FireFl30Sec);
ECAM_controller.warningReset(eng2FireFlAgent2);
}
if (phaseVar < 5 or phaseVar > 7) {
2020-02-07 16:10:54 +00:00
if (eng2FireGnlever.clearFlag == 0 and getprop("fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("fdm/jsbsim/fcs/throttle-lever[1]") > 0.01) {
2019-10-14 16:48:35 +00:00
eng2FireGnlever.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnlever);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnparkbrk.clearFlag == 0 and getprop("controls/gear/brake-parking") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireGnstopped.active = 1;
eng2FireGnparkbrk.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnstopped);
ECAM_controller.warningReset(eng2FireGnparkbrk);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnmaster.clearFlag == 0 and getprop("controls/engines/engine[1]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireGnmaster.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnmaster);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnPB.clearFlag == 0 and getprop("controls/engines/engine[1]/fire-btn") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireGnPB.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnPB);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnAgent1.clearFlag == 0 and !getprop("systems/fire/engine2/disch1")) {
2019-10-14 16:48:35 +00:00
eng2FireGnAgent1.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnAgent1);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnAgent2.clearFlag == 0 and !getprop("systems/fire/engine2/disch2")) {
2019-10-14 16:48:35 +00:00
eng2FireGnAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnAgent2);
}
2020-02-07 16:10:54 +00:00
if (eng2FireGnmaster2.clearFlag == 0 and getprop("controls/engines/engine[0]/cutoff-switch") == 0) {
2019-10-14 16:48:35 +00:00
eng2FireGnmaster2.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnmaster2);
}
if (eng2FireGnATC.clearFlag == 0) {
eng2FireGnATC.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnATC);
}
if (eng2FireGncrew.clearFlag == 0) {
eng2FireGncrew.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGncrew);
}
if (eng2FireGnevacSw.clearFlag == 0) {
eng2FireGnevac.active = 1;
eng2FireGnevacSw.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnevac);
ECAM_controller.warningReset(eng2FireGnevacSw);
}
2020-04-17 22:41:36 +00:00
if (eng2FireGnevacApu.clearFlag == 0 and getprop("controls/apu/master") and getprop("engines/engine[2]/n1") > 99) {
2019-10-14 16:48:35 +00:00
eng2FireGnevacApu.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnevacApu);
}
if (eng2FireGnevacBat.clearFlag == 0 and (systems.ELEC.Switch.bat1.getValue() or systems.ELEC.Switch.bat2.getValue())) {
eng2FireGnevacBat.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnevacBat);
}
} else {
ECAM_controller.warningReset(eng2FireGnlever);
ECAM_controller.warningReset(eng2FireGnstopped);
ECAM_controller.warningReset(eng2FireGnparkbrk);
ECAM_controller.warningReset(eng2FireGnmaster);
ECAM_controller.warningReset(eng2FireGnPB);
ECAM_controller.warningReset(eng2FireGnAgent1);
ECAM_controller.warningReset(eng2FireGnAgent2);
ECAM_controller.warningReset(eng2FireGnmaster2);
ECAM_controller.warningReset(eng2FireGnATC);
ECAM_controller.warningReset(eng2FireGncrew);
ECAM_controller.warningReset(eng2FireGnevac);
ECAM_controller.warningReset(eng2FireGnevacSw);
ECAM_controller.warningReset(eng2FireGnevacApu);
ECAM_controller.warningReset(eng2FireGnevacBat);
}
} else {
ECAM_controller.warningReset(eng2FireFllever);
ECAM_controller.warningReset(eng2FireFlmaster);
ECAM_controller.warningReset(eng2FireFlPB);
ECAM_controller.warningReset(eng2FireFlAgent1);
ECAM_controller.warningReset(eng2FireFlATC);
ECAM_controller.warningReset(eng2FireFl30Sec);
ECAM_controller.warningReset(eng2FireFlAgent2);
ECAM_controller.warningReset(eng2FireGnlever);
ECAM_controller.warningReset(eng2FireGnstopped);
ECAM_controller.warningReset(eng2FireGnparkbrk);
ECAM_controller.warningReset(eng2FireGnmaster);
ECAM_controller.warningReset(eng2FireGnPB);
ECAM_controller.warningReset(eng2FireGnAgent1);
ECAM_controller.warningReset(eng2FireGnAgent2);
ECAM_controller.warningReset(eng2FireGnmaster2);
ECAM_controller.warningReset(eng2FireGnATC);
ECAM_controller.warningReset(eng2FireGncrew);
ECAM_controller.warningReset(eng2FireGnevac);
ECAM_controller.warningReset(eng2FireGnevacSw);
ECAM_controller.warningReset(eng2FireGnevacApu);
ECAM_controller.warningReset(eng2FireGnevacBat);
}
# APU Fire
if (apuFire.active == 1) {
2020-04-14 17:07:01 +00:00
if (apuFirePB.clearFlag == 0 and !getprop("controls/apu/fire-btn")) {
2019-10-14 16:48:35 +00:00
apuFirePB.active = 1;
} else {
ECAM_controller.warningReset(apuFirePB);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fire/apu/agent-timer") != 0 and getprop("systems/fire/apu/agent-timer") != 99) {
apuFireAgentTimer.msg = " -AGENT AFT " ~ getprop("systems/fire/apu/agent-timer") ~ " S...DISCH";
2019-10-14 16:48:35 +00:00
}
2020-04-14 17:07:01 +00:00
if (apuFireAgent.clearFlag == 0 and getprop("controls/apu/fire-btn") and !getprop("systems/fire/apu/disch") and getprop("systems/fire/apu/agent-timer") != 0) {
2019-10-14 16:48:35 +00:00
apuFireAgentTimer.active = 1;
} else {
ECAM_controller.warningReset(apuFireAgentTimer);
}
2020-04-14 17:07:01 +00:00
if (apuFireAgent.clearFlag == 0 and getprop("controls/apu/fire-btn") and !getprop("systems/fire/apu/disch") and getprop("systems/fire/apu/agent-timer") == 0) {
2019-10-14 16:48:35 +00:00
apuFireAgent.active = 1;
} else {
ECAM_controller.warningReset(apuFireAgent);
}
2020-04-14 17:07:01 +00:00
if (apuFireMaster.clearFlag == 0 and getprop("controls/apu/master")) {
2019-10-14 16:48:35 +00:00
apuFireMaster.active = 1;
} else {
ECAM_controller.warningReset(apuFireMaster);
}
} else {
ECAM_controller.warningReset(apuFirePB);
ECAM_controller.warningReset(apuFireAgentTimer);
ECAM_controller.warningReset(apuFireAgent);
ECAM_controller.warningReset(apuFireMaster);
}
# CONFIG
2020-02-07 16:10:54 +00:00
if ((slats_config.clearFlag == 0) and (getprop("controls/flight/flap-lever") == 0 or getprop("controls/flight/flap-lever")) == 4 and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
slats_config.active = 1;
slats_config_1.active = 1;
} else {
ECAM_controller.warningReset(slats_config);
ECAM_controller.warningReset(slats_config_1);
}
2020-02-07 16:10:54 +00:00
if ((flaps_config.clearFlag == 0) and (getprop("controls/flight/flap-lever") == 0 or getprop("controls/flight/flap-lever") == 4) and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
flaps_config.active = 1;
flaps_config_1.active = 1;
} else {
ECAM_controller.warningReset(flaps_config);
ECAM_controller.warningReset(flaps_config_1);
}
2020-02-07 16:10:54 +00:00
if ((spd_brk_config.clearFlag == 0) and getprop("controls/flight/speedbrake") != 0 and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
spd_brk_config.active = 1;
spd_brk_config_1.active = 1;
} else {
ECAM_controller.warningReset(spd_brk_config);
ECAM_controller.warningReset(spd_brk_config_1);
}
2020-02-07 16:10:54 +00:00
if ((pitch_trim_config.clearFlag == 0) and (getprop("fdm/jsbsim/hydraulics/elevator-trim/final-deg") > 1.75 or getprop("fdm/jsbsim/hydraulics/elevator-trim/final-deg") < -3.65) and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
pitch_trim_config.active = 1;
pitch_trim_config_1.active = 1;
} else {
ECAM_controller.warningReset(pitch_trim_config);
ECAM_controller.warningReset(pitch_trim_config_1);
}
2020-02-07 16:10:54 +00:00
if ((rud_trim_config.clearFlag == 0) and (getprop("fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") < -3.55 or getprop("fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") > 3.55) and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
rud_trim_config.active = 1;
rud_trim_config_1.active = 1;
} else {
ECAM_controller.warningReset(rud_trim_config);
ECAM_controller.warningReset(rud_trim_config_1);
}
2020-02-07 16:10:54 +00:00
if ((park_brk_config.clearFlag == 0) and getprop("controls/gear/brake-parking") == 1 and phaseVar >= 3 and phaseVar <= 4) {
2019-10-14 16:48:35 +00:00
park_brk_config.active = 1;
} else {
ECAM_controller.warningReset(park_brk_config);
}
# AUTOFLT
if ((ap_offw.clearFlag == 0) and apWarn.getValue() == 2) {
ap_offw.active = 1;
} else {
ECAM_controller.warningReset(ap_offw);
}
2020-03-17 13:08:07 +00:00
# C-Chord
2020-03-18 12:30:00 +00:00
if ((pts.Modes.Altimeter.std.getValue() and abs(fcu.altSet.getValue() - getprop("systems/navigation/adr/output/baro-alt-1-capt")) < 200) or !pts.Modes.Altimeter.std.getValue() and abs(fcu.altSet.getValue() - getprop("systems/navigation/adr/output/baro-alt-corrected-1-capt")) < 200) {
alt200 = 1;
2020-03-17 13:08:07 +00:00
} else {
2020-03-18 12:30:00 +00:00
alt200 = 0;
2020-03-17 13:08:07 +00:00
}
2020-03-17 19:56:01 +00:00
if ((pts.Modes.Altimeter.std.getValue() and abs(fcu.altSet.getValue() - getprop("systems/navigation/adr/output/baro-alt-1-capt")) < 750) or !pts.Modes.Altimeter.std.getValue() and abs(fcu.altSet.getValue() - getprop("systems/navigation/adr/output/baro-alt-corrected-1-capt")) < 750) {
2020-03-17 13:08:07 +00:00
alt750 = 1;
} else {
alt750 = 0;
}
if (FWC.altChg.getValue() or pts.Gear.position[0].getValue() == 1 or (getprop("controls/gear/gear-down") and pts.JSBSIM.FCS.slatDeg.getValue() > 4) or fmgc.Output.vert.getValue() == 2) {
altAlertInhibit = 1;
} else {
altAlertInhibit = 0;
}
2020-03-18 12:30:00 +00:00
if (alt750 and !alt200 and !altAlertInhibit) {
2020-03-17 19:56:01 +00:00
FWC.Monostable.altAlert2.setValue(1);
} else {
FWC.Monostable.altAlert2.setValue(0);
}
2020-03-18 16:02:43 +00:00
if ((!fcu.ap1.getBoolValue() and !fcu.ap2.getBoolValue()) and FWC.Monostable.altAlert2.getValue()) {
2020-03-17 13:08:07 +00:00
FWC.Monostable.altAlert1.setValue(1);
} else {
FWC.Monostable.altAlert1.setValue(0);
}
2020-03-18 12:30:00 +00:00
if (alt750 and alt200 and !altAlertInhibit) {
2020-03-17 13:08:07 +00:00
setprop("ECAM/flipflop/alt-alert-2-rs-set", 1);
} else {
setprop("ECAM/flipflop/alt-alert-2-rs-set", 0);
}
2020-03-18 12:30:00 +00:00
if (getprop("ECAM/flipflop/alt-alert-rs-reset") or (!alt750 and !alt200 and !altAlertInhibit)) {
2020-03-17 13:08:07 +00:00
setprop("ECAM/flipflop/alt-alert-2-rs-reset", 1);
} else {
setprop("ECAM/flipflop/alt-alert-2-rs-reset", 0);
}
2020-03-18 12:30:00 +00:00
if (alt750 and !alt200 and !altAlertInhibit and getprop("ECAM/flipflop/alt-alert-2-rs-output")) {
2020-03-17 13:08:07 +00:00
setprop("ECAM/flipflop/alt-alert-3-rs-set", 1);
} else {
setprop("ECAM/flipflop/alt-alert-3-rs-set", 0);
}
2020-03-18 12:30:00 +00:00
if ((!alt750 and !alt200 and !altAlertInhibit and getprop("ECAM/flipflop/alt-alert-rs-output")) or (!alt750 and !alt200 and !altAlertInhibit and getprop("ECAM/flipflop/alt-alert-3-rs-output")) or getprop("ECAM/flipflop/alt-alert-3-rs-set")) {
2020-03-17 19:56:01 +00:00
bigThree = 1;
} else {
bigThree = 0;
}
if (!gnd and (FWC.Monostable.altAlert1Output.getValue() or bigThree)) {
if (!getprop("sim/sound/warnings/cchord-inhibit")) {
setprop("sim/sound/warnings/cchord", 1);
} else {
setprop("sim/sound/warnings/cchord", 0);
}
} else {
setprop("sim/sound/warnings/cchord", 0);
setprop("sim/sound/warnings/cchord-inhibit", 0);
}
2020-03-18 12:30:00 +00:00
if (!gnd and getprop("ECAM/flipflop/alt-alert-3-rs-set") != 1 and alt750 and !alt200 and !altAlertInhibit) {
2020-03-17 19:56:01 +00:00
setprop("ECAM/alt-alert-steady", 1);
} else {
setprop("ECAM/alt-alert-steady", 0);
}
if (!gnd and bigThree) {
setprop("ECAM/alt-alert-flash", 1);
2020-03-17 13:08:07 +00:00
} else {
2020-03-17 19:56:01 +00:00
setprop("ECAM/alt-alert-flash", 0);
2020-03-17 13:08:07 +00:00
}
2019-10-14 16:48:35 +00:00
if (!systems.cargoTestBtn.getBoolValue()) {
2019-10-31 18:57:19 +00:00
if (cargoSmokeFwd.clearFlag == 0 and systems.fwdCargoFireWarn.getBoolValue() and (phaseVar <= 3 or phaseVar >= 9 or phaseVar == 6)) {
2019-10-14 16:48:35 +00:00
cargoSmokeFwd.active = 1;
} elsif (cargoSmokeFwd.clearFlag == 1 or systems.cargoTestBtnOff.getBoolValue()) {
ECAM_controller.warningReset(cargoSmokeFwd);
2020-01-02 11:57:46 +00:00
cargoSmokeFwd.isMainMsg = 1;
2019-10-14 16:48:35 +00:00
}
2020-02-07 16:10:54 +00:00
if (cargoSmokeFwdAgent.clearFlag == 0 and cargoSmokeFwd.active == 1 and !getprop("systems/fire/cargo/disch")) {
2019-10-14 16:48:35 +00:00
cargoSmokeFwdAgent.active = 1;
} else {
ECAM_controller.warningReset(cargoSmokeFwdAgent);
2020-01-02 11:57:46 +00:00
cargoSmokeFwd.isMainMsg = 0;
2019-10-14 16:48:35 +00:00
}
2019-10-31 18:57:19 +00:00
if (cargoSmokeAft.clearFlag == 0 and systems.aftCargoFireWarn.getBoolValue() and (phaseVar <= 3 or phaseVar >= 9 or phaseVar == 6)) {
2019-10-14 16:48:35 +00:00
cargoSmokeAft.active = 1;
} elsif (cargoSmokeAft.clearFlag == 1 or systems.cargoTestBtnOff.getBoolValue()) {
ECAM_controller.warningReset(cargoSmokeAft);
2020-01-02 11:57:46 +00:00
cargoSmokeAft.isMainMsg = 1;
2019-10-14 16:48:35 +00:00
systems.cargoTestBtnOff.setBoolValue(0);
}
2020-02-07 16:10:54 +00:00
if (cargoSmokeAftAgent.clearFlag == 0 and cargoSmokeAft.active == 1 and !getprop("systems/fire/cargo/disch")) {
2019-10-14 16:48:35 +00:00
cargoSmokeAftAgent.active = 1;
} else {
ECAM_controller.warningReset(cargoSmokeAftAgent);
2020-01-02 11:57:46 +00:00
cargoSmokeAft.isMainMsg = 0;
2019-10-14 16:48:35 +00:00
}
} else {
if (systems.aftCargoFireWarn.getBoolValue()) {
cargoSmokeFwd.active = 1;
cargoSmokeFwdAgent.active = 1;
cargoSmokeAft.active = 1;
cargoSmokeAftAgent.active = 1;
} else {
ECAM_controller.warningReset(cargoSmokeFwd);
ECAM_controller.warningReset(cargoSmokeFwdAgent);
ECAM_controller.warningReset(cargoSmokeAft);
ECAM_controller.warningReset(cargoSmokeAftAgent);
}
}
# ESS on BAT
2020-02-07 16:10:54 +00:00
if ((!gear.getValue() or !getprop("controls/gear/gear-down")) and getprop("systems/electrical/some-electric-thingie/static-inverter-timer") == 1 and phaseVar >= 5 and phaseVar <= 7) {
2019-10-14 16:48:35 +00:00
essBusOnBat.active = 1;
essBusOnBatLGUplock.active = 1;
essBusOnBatManOn.active = 1;
essBusOnBatRetract.active = 1;
essBusOnBatMinSpeed.active = 1;
essBusOnBatLGCB.active = 1;
} else {
ECAM_controller.warningReset(essBusOnBat);
ECAM_controller.warningReset(essBusOnBatLGUplock);
ECAM_controller.warningReset(essBusOnBatManOn);
ECAM_controller.warningReset(essBusOnBatRetract);
ECAM_controller.warningReset(essBusOnBatMinSpeed);
ECAM_controller.warningReset(essBusOnBatLGCB);
}
# EMER CONFIG
2020-04-17 23:51:16 +00:00
if (getprop("systems/electrical/some-electric-thingie/emer-elec-config") and !dualFailNode.getBoolValue() and phaseVar != 4 and phaseVar != 8 and emerconfig.clearFlag == 0 and !getprop("systems/acconfig/autoconfig-running")) {
2019-10-14 16:48:35 +00:00
emerconfig.active = 1;
2020-02-07 16:10:54 +00:00
if (getprop("systems/hydraulic/sources/rat/position") != 0 and emerconfigMinRat.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
emerconfigMinRat.active = 1;
} else {
ECAM_controller.warningReset(emerconfigMinRat);
}
2020-02-07 16:10:54 +00:00
if (!(getprop("systems/electrical/some-electric-thingie/generator-1-reset") and getprop("systems/electrical/some-electric-thingie/generator-2-reset")) and emerconfigGen.clearFlag == 0) {
2019-12-28 17:35:06 +00:00
emerconfigGen.active = 1; # EGEN12R TRUE
2019-10-14 16:48:35 +00:00
} else {
ECAM_controller.warningReset(emerconfigGen);
}
2020-02-07 16:10:54 +00:00
if (!(getprop("systems/electrical/some-electric-thingie/generator-1-reset-bustie") and getprop("systems/electrical/some-electric-thingie/generator-2-reset-bustie")) and emerconfigGen2.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
emerconfigGen2.active = 1;
2020-02-07 16:10:54 +00:00
if (getprop("controls/electrical/switches/bus-tie")) {
2019-10-14 16:48:35 +00:00
emerconfigBusTie.active = 1;
} else {
ECAM_controller.warningReset(emerconfigBusTie);
}
2019-12-28 17:35:06 +00:00
emerconfigGen3.active = 1; # EGENRESET TRUE
2019-10-14 16:48:35 +00:00
} else {
ECAM_controller.warningReset(emerconfigGen2);
ECAM_controller.warningReset(emerconfigBusTie);
ECAM_controller.warningReset(emerconfigGen3);
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/electrical/relay/emer-glc/contact-pos") == 0 and emerconfigManOn.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
emerconfigManOn.active = 1;
} else {
ECAM_controller.warningReset(emerconfigManOn);
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/engines/engine-start-switch") != 2 and emerconfigEngMode.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
emerconfigEngMode.active = 1;
} else {
ECAM_controller.warningReset(emerconfigEngMode);
}
if (emerconfigRadio.clearFlag == 0) {
emerconfigRadio.active = 1;
} else {
ECAM_controller.warningReset(emerconfigRadio);
}
if (emerconfigIcing.clearFlag == 0) {
emerconfigIcing.active = 1;
} else {
ECAM_controller.warningReset(emerconfigIcing);
}
if (emerconfigFuelG.clearFlag == 0) {
emerconfigFuelG.active = 1;
} else {
ECAM_controller.warningReset(emerconfigFuelG);
}
if (emerconfigFuelG2.clearFlag == 0) {
emerconfigFuelG2.active = 1;
} else {
ECAM_controller.warningReset(emerconfigFuelG2);
}
if (emerConfigFACActive == 1 and emerconfigFAC.clearFlag == 0) {
emerconfigFAC.active = 1;
} else {
ECAM_controller.warningReset(emerconfigFAC);
}
2020-02-07 16:10:54 +00:00
if (!getprop("controls/electrical/switches/bus-tie") and emerconfigBusTie2.clearFlag == 0) {
2019-10-14 16:48:35 +00:00
emerconfigBusTie2.active = 1;
} else {
ECAM_controller.warningReset(emerconfigBusTie2);
}
if (emerconfigAPU.clearFlag == 0) {
emerconfigAPU.active = 1;
} else {
ECAM_controller.warningReset(emerconfigAPU);
}
if (emerconfigVent.clearFlag == 0) {
emerconfigVent.active = 1;
} else {
ECAM_controller.warningReset(emerconfigVent);
}
if (emerconfigAltn.clearFlag == 0) {
emerconfigAltn.active = 1;
} else {
ECAM_controller.warningReset(emerconfigAltn);
}
if (emerconfigProt.clearFlag == 0) {
emerconfigProt.active = 1;
} else {
ECAM_controller.warningReset(emerconfigProt);
}
if (emerconfigMaxSpeed.clearFlag == 0) {
emerconfigMaxSpeed.active = 1;
} else {
ECAM_controller.warningReset(emerconfigMaxSpeed);
}
} else {
ECAM_controller.warningReset(emerconfig);
ECAM_controller.warningReset(emerconfigMinRat);
ECAM_controller.warningReset(emerconfigGen);
ECAM_controller.warningReset(emerconfigGen2);
ECAM_controller.warningReset(emerconfigBusTie);
ECAM_controller.warningReset(emerconfigGen3);
ECAM_controller.warningReset(emerconfigManOn);
ECAM_controller.warningReset(emerconfigEngMode);
ECAM_controller.warningReset(emerconfigRadio);
ECAM_controller.warningReset(emerconfigIcing);
ECAM_controller.warningReset(emerconfigFuelG);
ECAM_controller.warningReset(emerconfigFuelG2);
ECAM_controller.warningReset(emerconfigFAC);
ECAM_controller.warningReset(emerconfigBusTie2);
ECAM_controller.warningReset(emerconfigAPU);
ECAM_controller.warningReset(emerconfigVent);
ECAM_controller.warningReset(emerconfigAltn);
ECAM_controller.warningReset(emerconfigProt);
ECAM_controller.warningReset(emerconfigMaxSpeed);
}
}
var messages_priority_2 = func {
2019-10-31 18:57:19 +00:00
phaseVar = phaseNode.getValue();
2019-10-23 17:25:37 +00:00
# DC EMER CONFIG
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dcEss.getValue() < 25 and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() < 25 and phaseVar != 4 and phaseVar != 8 and dcEmerconfig.clearFlag == 0) {
2019-10-23 17:25:37 +00:00
dcEmerconfig.active = 1;
dcEmerconfigManOn.active = 1;
} else {
ECAM_controller.warningReset(dcEmerconfig);
ECAM_controller.warningReset(dcEmerconfigManOn);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and !dcEmerconfig.active and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() < 25 and phaseVar != 4 and phaseVar != 8 and dcBus12Fault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
dcBus12Fault.active = 1;
dcBus12FaultBlower.active = 1;
dcBus12FaultExtract.active = 1;
dcBus12FaultBaroRef.active = 1;
dcBus12FaultIcing.active = 1;
dcBus12FaultBrking.active = 1;
} else {
ECAM_controller.warningReset(dcBus12Fault);
ECAM_controller.warningReset(dcBus12FaultBlower);
ECAM_controller.warningReset(dcBus12FaultExtract);
ECAM_controller.warningReset(dcBus12FaultBaroRef);
ECAM_controller.warningReset(dcBus12FaultIcing);
ECAM_controller.warningReset(dcBus12FaultBrking);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.acEss.getValue() < 110 and phaseVar != 4 and phaseVar != 8 and AcBusEssFault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
AcBusEssFault.active = 1;
if (!systems.ELEC.Switch.acEssFeed.getBoolValue()) {
AcBusEssFaultFeed.active = 1;
} else {
ECAM_controller.warningReset(AcBusEssFaultFeed);
}
AcBusEssFaultAtc.active = 1;
} else {
ECAM_controller.warningReset(AcBusEssFault);
ECAM_controller.warningReset(AcBusEssFaultFeed);
ECAM_controller.warningReset(AcBusEssFaultAtc);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.ac1.getValue() < 110 and phaseVar != 4 and phaseVar != 8 and AcBus1Fault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
AcBus1Fault.active = 1;
AcBus1FaultBlower.active = 1;
} else {
ECAM_controller.warningReset(AcBus1Fault);
ECAM_controller.warningReset(AcBus1FaultBlower);
}
2019-11-06 19:09:42 +00:00
if (!dcEmerconfig.active and systems.ELEC.Bus.dcEss.getValue() < 25 and phaseVar != 4 and phaseVar != 8 and DcEssBusFault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
DcEssBusFault.active = 1;
DcEssBusFaultRadio.active = 1;
DcEssBusFaultRadio2.active = 1;
DcEssBusFaultBaro.active = 1;
DcEssBusFaultGPWS.active = 1;
} else {
ECAM_controller.warningReset(DcEssBusFault);
ECAM_controller.warningReset(DcEssBusFaultRadio);
ECAM_controller.warningReset(DcEssBusFaultRadio2);
ECAM_controller.warningReset(DcEssBusFaultBaro);
ECAM_controller.warningReset(DcEssBusFaultGPWS);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.ac2.getValue() < 110 and phaseVar != 4 and phaseVar != 8 and AcBus2Fault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
AcBus2Fault.active = 1;
AcBus2FaultExtract.active = 1;
} else {
ECAM_controller.warningReset(AcBus2Fault);
ECAM_controller.warningReset(AcBus2FaultExtract);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dc1.getValue() < 25 and systems.ELEC.Bus.dc2.getValue() >= 25 and phaseVar != 4 and phaseVar != 8 and dcBus1Fault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
dcBus1Fault.active = 1;
dcBus1FaultBlower.active = 1;
dcBus1FaultExtract.active = 1;
} else {
ECAM_controller.warningReset(dcBus1Fault);
ECAM_controller.warningReset(dcBus1FaultBlower);
ECAM_controller.warningReset(dcBus1FaultExtract);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and systems.ELEC.Bus.dc1.getValue() >= 25 and systems.ELEC.Bus.dc2.getValue() <= 25 and phaseVar != 4 and phaseVar != 8 and dcBus2Fault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
dcBus2Fault.active = 1;
dcBus2FaultAirData.active = 1;
dcBus2FaultBaro.active = 1;
} else {
ECAM_controller.warningReset(dcBus2Fault);
ECAM_controller.warningReset(dcBus2FaultAirData);
ECAM_controller.warningReset(dcBus2FaultBaro);
}
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config") and !dcEmerconfig.active and systems.ELEC.Bus.dcBat.getValue() < 25 and phaseVar != 4 and phaseVar != 5 and phaseVar != 7 and phaseVar != 8 and dcBusBatFault.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
dcBusBatFault.active = 1;
} else {
ECAM_controller.warningReset(dcBusBatFault);
}
2020-02-07 16:10:54 +00:00
if (!(getprop("systems/electrical/some-electric-thingie/emer-elec-config") and !getprop("systems/electrical/relay/emer-glc/contact-pos")) and systems.ELEC.Bus.dcEssShed.getValue() < 25 and systems.ELEC.Bus.dcEss.getValue() >= 25 and phaseVar != 4 and phaseVar != 8 and dcBusEssShed.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
dcBusEssShed.active = 1;
dcBusEssShedExtract.active = 1;
dcBusEssShedIcing.active = 1;
} else {
ECAM_controller.warningReset(dcBusEssShed);
ECAM_controller.warningReset(dcBusEssShedExtract);
ECAM_controller.warningReset(dcBusEssShedIcing);
}
2020-02-07 16:10:54 +00:00
if (!(getprop("systems/electrical/some-electric-thingie/emer-elec-config") and !getprop("systems/electrical/relay/emer-glc/contact-pos")) and systems.ELEC.Bus.acEssShed.getValue() < 110 and systems.ELEC.Bus.acEss.getValue() >= 110 and phaseVar != 4 and phaseVar != 8 and acBusEssShed.clearFlag == 0) {
2019-10-31 18:57:19 +00:00
acBusEssShed.active = 1;
2020-02-07 16:10:54 +00:00
if (!getprop("systems/electrical/some-electric-thingie/emer-elec-config")) {
2019-10-31 18:57:19 +00:00
acBusEssShedAtc.active = 1;
} else {
ECAM_controller.warningReset(acBusEssShed);
}
} else {
ECAM_controller.warningReset(acBusEssShed);
ECAM_controller.warningReset(acBusEssShedAtc);
}
2020-01-01 21:30:13 +00:00
if ((athr_offw.clearFlag == 0) and athrWarn.getValue() == 2 and phaseVar != 4 and phaseVar != 8 and phaseVar != 10) {
athr_offw.active = 1;
athr_offw_1.active = 1;
} else {
ECAM_controller.warningReset(athr_offw);
ECAM_controller.warningReset(athr_offw_1);
}
2020-02-07 16:10:54 +00:00
if ((athr_lock.clearFlag == 0) and phaseVar >= 5 and phaseVar <= 7 and getprop("systems/thrust/thr-locked-alert") == 1) {
if (getprop("systems/thrust/thr-locked-flash") == 0) {
2019-12-28 17:35:06 +00:00
athr_lock.msg = " ";
} else {
athr_lock.msg = msgSave
}
athr_lock.active = 1;
athr_lock_1.active = 1;
} else {
ECAM_controller.warningReset(athr_lock);
ECAM_controller.warningReset(athr_lock_1);
}
2020-02-07 16:10:54 +00:00
if ((athr_lim.clearFlag == 0) and getprop("it-autoflight/output/athr") == 1 and ((getprop("systems/thrust/eng-out") != 1 and (getprop("systems/thrust/state1") == "MAN" or getprop("systems/thrust/state2") == "MAN")) or (getprop("systems/thrust/eng-out") == 1 and (getprop("systems/thrust/state1") == "MAN" or getprop("systems/thrust/state2") == "MAN" or (getprop("systems/thrust/state1") == "MAN THR" and getprop("controls/engines/engine[0]/throttle-pos") <= 0.83) or (getprop("systems/thrust/state2") == "MAN THR" and getprop("controls/engines/engine[0]/throttle-pos") <= 0.83)))) and (phaseVar >= 5 and phaseVar <= 7)) {
2019-12-28 17:35:06 +00:00
athr_lim.active = 1;
athr_lim_1.active = 1;
} else {
ECAM_controller.warningReset(athr_lim);
ECAM_controller.warningReset(athr_lim_1);
}
2020-02-07 16:10:54 +00:00
if (getprop("instrumentation/tcas/serviceable") == 0 and phaseVar != 3 and phaseVar != 4 and phaseVar != 7 and systems.ELEC.Bus.ac1.getValue() and pts.Instrumentation.TCAS.Inputs.mode.getValue() != 1 and tcasFault.clearFlag == 0) {
2019-11-06 19:09:42 +00:00
tcasFault.active = 1;
} else {
ECAM_controller.warningReset(tcasFault);
}
if (fcu.FCUController.FCU1.failed and fcu.FCUController.FCU2.failed and systems.ELEC.Bus.dcEss.getValue() >= 25 and systems.ELEC.Bus.dcEss.getValue() >= 25 and fcuFault.clearFlag == 0) {
2019-10-29 15:19:43 +00:00
fcuFault.active = 1;
fcuFaultBaro.active = 1;
} else {
ECAM_controller.warningReset(fcuFault);
ECAM_controller.warningReset(fcuFaultBaro);
}
2019-11-06 19:09:42 +00:00
if (fcu.FCUController.FCU1.failed and !fcu.FCUController.FCU2.failed and systems.ELEC.Bus.dcEss.getValue() >= 25 and fcuFault1.clearFlag == 0) {
2019-10-29 15:19:43 +00:00
fcuFault1.active = 1;
fcuFault1Baro.active = 1;
} else {
ECAM_controller.warningReset(fcuFault1);
ECAM_controller.warningReset(fcuFault1Baro);
}
2019-11-06 19:09:42 +00:00
if (fcu.FCUController.FCU2.failed and !fcu.FCUController.FCU1.failed and systems.ELEC.Bus.dc2.getValue() >= 25 and fcuFault2.clearFlag == 0) {
2019-10-29 15:19:43 +00:00
fcuFault2.active = 1;
fcuFault2Baro.active = 1;
} else {
ECAM_controller.warningReset(fcuFault2);
ECAM_controller.warningReset(fcuFault2Baro);
}
2019-10-23 17:25:37 +00:00
# APU EMER SHUT DOWN
2020-04-19 00:26:24 +00:00
if (apuEmerShutdown.clearFlag == 0 and systems.APUController.APU.signals.autoshutdown and systems.APUController.APU.signals.emer and !getprop("systems/fire/apu/warning-active") and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
apuEmerShutdown.active = 1;
} elsif (apuEmerShutdown.clearFlag == 1) {
ECAM_controller.warningReset(apuEmerShutdown);
2020-01-02 11:57:46 +00:00
apuEmerShutdown.isMainMsg = 1;
2019-10-14 16:48:35 +00:00
}
2020-04-14 17:07:01 +00:00
if (apuEmerShutdownMast.clearFlag == 0 and getprop("controls/apu/master") and apuEmerShutdown.active == 1) {
2019-10-14 16:48:35 +00:00
apuEmerShutdownMast.active = 1;
} else {
ECAM_controller.warningReset(apuEmerShutdownMast);
2020-01-02 11:57:46 +00:00
apuEmerShutdown.isMainMsg = 0;
2019-10-14 16:48:35 +00:00
}
2020-04-19 00:26:24 +00:00
# APU AUTO SHUT DOWN
if (apuEmerShutdown.clearFlag == 0 and systems.APUController.APU.signals.autoshutdown and !systems.APUController.APU.signals.emer and !getprop("systems/fire/apu/warning-active") and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
apuAutoShutdown.active = 1;
} elsif (apuAutoShutdown.clearFlag == 1) {
ECAM_controller.warningReset(apuAutoShutdown);
apuAutoShutdown.isMainMsg = 1;
}
if (apuAutoShutdownMast.clearFlag == 0 and getprop("controls/apu/master") and apuAutoShutdown.active == 1) {
apuAutoShutdownMast.active = 1;
} else {
ECAM_controller.warningReset(apuAutoShutdownMast);
apuAutoShutdown.isMainMsg = 0;
}
2019-10-31 18:57:19 +00:00
if (eng1FireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[0].condition == 0 or (systems.engFireDetectorUnits.vector[0].loopOne == 9 and systems.engFireDetectorUnits.vector[0].loopTwo == 9 and systems.eng1Inop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng1FireDetFault.active = 1;
} else {
ECAM_controller.warningReset(eng1FireDetFault);
}
2019-10-31 18:57:19 +00:00
if (eng1LoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[0].loopOne == 9 and systems.engFireDetectorUnits.vector[0].loopTwo != 9 and !systems.eng1Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng1LoopAFault.active = 1;
} else {
ECAM_controller.warningReset(eng1LoopAFault);
}
2019-10-31 18:57:19 +00:00
if (eng1LoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[0].loopOne != 9 and systems.engFireDetectorUnits.vector[0].loopTwo == 9 and !systems.eng1Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng1LoopBFault.active = 1;
} else {
ECAM_controller.warningReset(eng1LoopBFault);
}
2019-10-31 18:57:19 +00:00
if (eng2FireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[1].condition == 0 or (systems.engFireDetectorUnits.vector[1].loopOne == 9 and systems.engFireDetectorUnits.vector[1].loopTwo == 9 and systems.eng2Inop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng2FireDetFault.active = 1;
} else {
ECAM_controller.warningReset(eng2FireDetFault);
}
2019-10-31 18:57:19 +00:00
if (eng2LoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[1].loopOne == 9 and systems.engFireDetectorUnits.vector[1].loopTwo != 9 and !systems.eng2Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng2LoopAFault.active = 1;
} else {
ECAM_controller.warningReset(eng2LoopAFault);
}
2019-10-31 18:57:19 +00:00
if (eng2LoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[1].loopOne != 9 and systems.engFireDetectorUnits.vector[1].loopTwo == 9 and !systems.eng2Inop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
eng2LoopBFault.active = 1;
} else {
ECAM_controller.warningReset(eng2LoopBFault);
}
2019-10-31 18:57:19 +00:00
if (apuFireDetFault.clearFlag == 0 and (systems.engFireDetectorUnits.vector[2].condition == 0 or (systems.engFireDetectorUnits.vector[2].loopOne == 9 and systems.engFireDetectorUnits.vector[2].loopTwo == 9 and systems.apuInop.getBoolValue())) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
apuFireDetFault.active = 1;
} else {
ECAM_controller.warningReset(apuFireDetFault);
}
2019-10-31 18:57:19 +00:00
if (apuLoopAFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[2].loopOne == 9 and systems.engFireDetectorUnits.vector[2].loopTwo != 9 and !systems.apuInop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
apuLoopAFault.active = 1;
} else {
ECAM_controller.warningReset(apuLoopAFault);
}
2019-10-31 18:57:19 +00:00
if (apuLoopBFault.clearFlag == 0 and systems.engFireDetectorUnits.vector[2].loopOne != 9 and systems.engFireDetectorUnits.vector[2].loopTwo == 9 and !systems.apuInop.getBoolValue() and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
apuLoopBFault.active = 1;
} else {
ECAM_controller.warningReset(apuLoopBFault);
}
2019-10-31 18:57:19 +00:00
if (crgAftFireDetFault.clearFlag == 0 and (systems.cargoSmokeDetectorUnits.vector[0].condition == 0 or systems.cargoSmokeDetectorUnits.vector[1].condition == 0) and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
crgAftFireDetFault.active = 1;
} else {
ECAM_controller.warningReset(crgAftFireDetFault);
}
2019-10-31 18:57:19 +00:00
if (crgFwdFireDetFault.clearFlag == 0 and systems.cargoSmokeDetectorUnits.vector[2].condition == 0 and (phaseVar == 6 or phaseVar >= 9 or phaseVar <= 2)) {
2019-10-14 16:48:35 +00:00
crgFwdFireDetFault.active = 1;
} else {
ECAM_controller.warningReset(crgFwdFireDetFault);
}
2020-04-21 15:07:16 +00:00
if (hf1Emitting.clearFlag == 0 and transmitFlag1) {
hf1Emitting.active = 1;
} else {
ECAM_controller.warningReset(hf1Emitting);
}
if (hf2Emitting.clearFlag == 0 and transmitFlag2) {
hf2Emitting.active = 1;
} else {
ECAM_controller.warningReset(hf2Emitting);
}
2019-10-14 16:48:35 +00:00
}
2019-10-31 18:57:19 +00:00
var messages_priority_1 = func {
}
var messages_priority_0 = func {
if (FWC.Btn.recallStsNormalOutput.getBoolValue()) {
recallNormal.active = 1;
recallNormal1.active = 1;
recallNormal2.active = 1;
} else {
ECAM_controller.warningReset(recallNormal);
ECAM_controller.warningReset(recallNormal1);
ECAM_controller.warningReset(recallNormal2);
}
}
2019-10-14 16:48:35 +00:00
2019-10-29 15:19:43 +00:00
var messages_config_memo = func {
2019-10-31 18:57:19 +00:00
phaseVar = phaseNode.getValue();
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/flap-lever") == 0 or getprop("controls/flight/flap-lever") == 4 or getprop("controls/flight/speedbrake") != 0 or getprop("fdm/jsbsim/hydraulics/elevator-trim/final-deg") > 1.75 or getprop("fdm/jsbsim/hydraulics/elevator-trim/final-deg") < -3.65 or getprop("fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") < -3.55 or getprop("fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") > 3.55) {
setprop("ECAM/to-config-normal", 0);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-config-normal", 1);
2019-10-29 15:19:43 +00:00
}
2020-02-07 16:10:54 +00:00
if (getprop("ECAM/to-config-test") and (phaseVar == 2 or phaseVar == 9)) {
setprop("ECAM/to-config-set", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-config-set", 0);
2019-10-29 15:19:43 +00:00
}
2020-02-07 16:10:54 +00:00
if (!getprop("ECAM/to-config-normal") or phaseVar == 6) {
setprop("ECAM/to-config-reset", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-config-reset", 0);
2019-10-29 15:19:43 +00:00
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/autobrake/mode") == 3) {
2019-10-29 15:19:43 +00:00
toMemoLine1.msg = "T.O AUTO BRK MAX";
toMemoLine1.colour = "g";
} else {
toMemoLine1.msg = "T.O AUTO BRK.....MAX";
toMemoLine1.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/switches/seatbelt-sign") and getprop("controls/switches/no-smoking-sign")) {
2019-10-29 15:19:43 +00:00
toMemoLine2.msg = " SIGNS ON";
toMemoLine2.colour = "g";
} else {
toMemoLine2.msg = " SIGNS.........ON";
toMemoLine2.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/speedbrake-arm")) {
2019-10-29 15:19:43 +00:00
toMemoLine3.msg = " SPLRS ARM";
toMemoLine3.colour = "g";
} else {
toMemoLine3.msg = " SPLRS........ARM";
toMemoLine3.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/flap-pos") > 0 and getprop("controls/flight/flap-pos") < 5) {
2019-10-29 15:19:43 +00:00
toMemoLine4.msg = " FLAPS T.O";
toMemoLine4.colour = "g";
} else {
toMemoLine4.msg = " FLAPS........T.O";
toMemoLine4.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("ECAM/to-config-flipflop") and getprop("ECAM/to-config-normal")) {
2019-10-29 15:19:43 +00:00
toMemoLine5.msg = " T.O CONFIG NORMAL";
toMemoLine5.colour = "g";
} else {
toMemoLine5.msg = " T.O CONFIG..TEST";
toMemoLine5.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("ECAM/to-config-test") and (phaseVar == 2 or phaseVar == 9)) {
setprop("ECAM/to-memo-set", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-memo-set", 0);
2019-10-29 15:19:43 +00:00
}
2019-10-31 18:57:19 +00:00
if (phaseVar == 1 or phaseVar == 3 or phaseVar == 6 or phaseVar == 10) {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-memo-reset", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/to-memo-reset", 0);
2019-10-29 15:19:43 +00:00
}
2020-02-07 16:10:54 +00:00
if ((phaseVar == 2 and getprop("ECAM/engine-start-time") != 0 and getprop("ECAM/engine-start-time") + 120 < getprop("sim/time/elapsed-sec")) or getprop("ECAM/to-memo-flipflop")) {
2019-10-29 15:19:43 +00:00
toMemoLine1.active = 1;
toMemoLine2.active = 1;
toMemoLine3.active = 1;
toMemoLine4.active = 1;
toMemoLine5.active = 1;
} else {
ECAM_controller.warningReset(toMemoLine1);
ECAM_controller.warningReset(toMemoLine2);
ECAM_controller.warningReset(toMemoLine3);
ECAM_controller.warningReset(toMemoLine4);
ECAM_controller.warningReset(toMemoLine5);
}
2020-02-07 16:10:54 +00:00
if (getprop("fdm/jsbsim/gear/gear-pos-norm") == 1) {
2019-10-29 15:19:43 +00:00
ldgMemoLine1.msg = "LDG LDG GEAR DN";
ldgMemoLine1.colour = "g";
} else {
ldgMemoLine1.msg = "LDG LDG GEAR......DN";
ldgMemoLine1.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/switches/seatbelt-sign") and getprop("controls/switches/no-smoking-sign")) {
2019-10-29 15:19:43 +00:00
ldgMemoLine2.msg = " SIGNS ON";
ldgMemoLine2.colour = "g";
} else {
ldgMemoLine2.msg = " SIGNS.........ON";
ldgMemoLine2.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/speedbrake-arm")) {
2019-10-29 15:19:43 +00:00
ldgMemoLine3.msg = " SPLRS ARM";
ldgMemoLine3.colour = "g";
} else {
ldgMemoLine3.msg = " SPLRS........ARM";
ldgMemoLine3.colour = "c";
}
2020-02-07 16:10:54 +00:00
if (getprop("it-fbw/law") == 1 or getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override")) {
if (getprop("controls/flight/flap-pos") == 4) {
2019-10-29 15:19:43 +00:00
ldgMemoLine4.msg = " FLAPS CONF 3";
ldgMemoLine4.colour = "g";
} else {
ldgMemoLine4.msg = " FLAPS.....CONF 3";
ldgMemoLine4.colour = "c";
}
} else {
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/flap-pos") == 5) {
2019-10-29 15:19:43 +00:00
ldgMemoLine4.msg = " FLAPS FULL";
ldgMemoLine4.colour = "g";
} else {
ldgMemoLine4.msg = " FLAPS.......FULL";
ldgMemoLine4.colour = "c";
}
}
gear_agl_cur = pts.Position.gearAglFt.getValue();
if (gear_agl_cur < 2000) {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-set", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-set", 0);
2019-10-29 15:19:43 +00:00
}
if (gear_agl_cur > 2200) {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-reset", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-reset", 0);
2019-10-29 15:19:43 +00:00
}
if (gear_agl_cur > 2200) {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-2200-set", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-2200-set", 0);
2019-10-29 15:19:43 +00:00
}
2020-01-02 11:25:47 +00:00
if (phaseVar != 6 and phaseVar != 7 and phaseVar != 8) {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-2200-reset", 1);
2019-10-29 15:19:43 +00:00
} else {
2020-02-07 16:10:54 +00:00
setprop("ECAM/ldg-memo-2200-reset", 0);
2019-10-29 15:19:43 +00:00
}
2020-02-07 16:10:54 +00:00
if ((phaseVar == 6 and getprop("ECAM/ldg-memo-flipflop") and getprop("ECAM/ldg-memo-2200-flipflop")) or phaseVar == 7 or phaseVar == 8) {
2019-10-29 15:19:43 +00:00
ldgMemoLine1.active = 1;
ldgMemoLine2.active = 1;
ldgMemoLine3.active = 1;
ldgMemoLine4.active = 1;
} else {
ECAM_controller.warningReset(ldgMemoLine1);
ECAM_controller.warningReset(ldgMemoLine2);
ECAM_controller.warningReset(ldgMemoLine3);
ECAM_controller.warningReset(ldgMemoLine4);
}
}
2019-10-14 16:48:35 +00:00
var messages_memo = func {
phaseVar = phaseNode.getValue();
2020-02-07 16:10:54 +00:00
if (getprop("services/fuel-truck/enable") == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) {
2019-10-14 16:48:35 +00:00
refuelg.active = 1;
} else {
refuelg.active = 0;
}
2019-12-09 17:38:35 +00:00
if ((phaseVar == 1 or phaseVar == 2) and toMemoLine1.active != 1 and ldgMemoLine1.active != 1 and (systems.ADIRSnew.ADIRunits[0].inAlign == 1 or systems.ADIRSnew.ADIRunits[1].inAlign == 1 or systems.ADIRSnew.ADIRunits[2].inAlign == 1)) {
irs_in_align.active = 1;
2020-02-07 16:10:54 +00:00
if (getprop("ECAM/phases/timer/eng1or2-output")) {
2019-12-09 17:38:35 +00:00
irs_in_align.colour = "a";
} else {
irs_in_align.colour = "g";
}
timeNow = pts.Sim.Time.elapsedSec.getValue();
numberMinutes = math.round(math.max(systems.ADIRSnew.ADIRunits[0]._alignTime - timeNow, systems.ADIRSnew.ADIRunits[1]._alignTime - timeNow, systems.ADIRSnew.ADIRunits[2]._alignTime - timeNow) / 60);
if (numberMinutes >= 7) {
irs_in_align.msg = "IRS IN ALIGN > 7 MN";
} elsif (numberMinutes >= 1) {
irs_in_align.msg = "IRS IN ALIGN " ~ numberMinutes ~ " MN";
} else {
irs_in_align.msg = "IRS IN ALIGN";
}
} else {
if (irs_in_align.active and !timer10secIRS) {
timer10secIRS = 1;
irs_in_align.msg = "IRS ALIGNED";
settimer(func() {
irs_in_align.active = 0;
irs_in_align.msg = "IRS IN ALIGN";
timer10secIRS = 0;
}, 10);
} elsif (!timer10secIRS) {
irs_in_align.active = 0;
irs_in_align.msg = "IRS IN ALIGN";
}
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/flight/speedbrake-arm") == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) {
2019-10-14 16:48:35 +00:00
gnd_splrs.active = 1;
} else {
gnd_splrs.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/lighting/seatbelt-sign") == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) {
2019-10-14 16:48:35 +00:00
seatbelts.active = 1;
} else {
seatbelts.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/lighting/no-smoking-sign") == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) { # should go off after takeoff assuming switch is in auto due to old logic from the days when smoking was allowed!
2019-10-14 16:48:35 +00:00
nosmoke.active = 1;
} else {
nosmoke.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/lighting/strobe") == 0 and getprop("gear/gear[1]/wow") == 0 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) { # todo: use gear branch properties
2019-10-14 16:48:35 +00:00
strobe_lt_off.active = 1;
} else {
strobe_lt_off.active = 0;
}
2019-11-08 18:33:31 +00:00
if (systems.FUEL.Valves.transfer1.getValue() == 1 or systems.FUEL.Valves.transfer2.getValue() == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) {
outr_tk_fuel_xfrd.active = 1;
} else {
outr_tk_fuel_xfrd.active = 0;
}
2019-10-14 16:48:35 +00:00
2020-02-07 16:10:54 +00:00
if (getprop("consumables/fuel/total-fuel-lbs") < 6000 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) { # assuming US short ton 2000lb
2019-10-14 16:48:35 +00:00
fob_3T.active = 1;
} else {
fob_3T.active = 0;
}
2019-11-08 18:33:31 +00:00
if (getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-all-override") == 1 and toMemoLine1.active != 1 and ldgMemoLine1.active != 1) {
2019-10-14 16:48:35 +00:00
gpws_flap_mode_off.active = 1;
} else {
gpws_flap_mode_off.active = 0;
}
}
var messages_right_memo = func {
phaseVar = phaseNode.getValue();
2019-10-31 18:57:19 +00:00
if (FWC.Timer.toInhibitOutput.getValue() == 1) {
2019-10-14 16:48:35 +00:00
to_inhibit.active = 1;
} else {
to_inhibit.active = 0;
}
2019-10-31 18:57:19 +00:00
if (FWC.Timer.ldgInhibitOutput.getValue() == 1) {
2019-10-14 16:48:35 +00:00
ldg_inhibit.active = 1;
} else {
ldg_inhibit.active = 0;
}
2020-02-07 16:10:54 +00:00
if ((getprop("gear/gear[1]/wow") == 0) and (getprop("systems/electrical/some-electric-thingie/emer-elec-config") or getprop("systems/fire/engine1/warning-active") == 1 or getprop("systems/fire/engine2/warning-active") == 1 or getprop("systems/fire/apu/warning-active") == 1 or getprop("systems/failures/cargo-aft-fire") == 1 or getprop("systems/failures/cargo-fwd-fire") == 1) or (((getprop("systems/hydraulic/green-psi") < 1500 and getprop("engines/engine[0]/state") == 3) and (getprop("systems/hydraulic/yellow-psi") < 1500 and getprop("engines/engine[1]/state") == 3)) or ((getprop("systems/hydraulic/green-psi") < 1500 or getprop("systems/hydraulic/yellow-psi") < 1500) and getprop("engines/engine[0]/state") == 3 and getprop("engines/engine[1]/state") == 3) and phaseVar >= 3 and phaseVar <= 8)) {
2019-10-14 16:48:35 +00:00
# todo: emer elec
land_asap_r.active = 1;
} else {
land_asap_r.active = 0;
}
2020-02-07 16:10:54 +00:00
if (land_asap_r.active == 0 and getprop("gear/gear[1]/wow") == 0 and ((getprop("fdm/jsbsim/propulsion/tank[0]/contents-lbs") < 1650 and getprop("fdm/jsbsim/propulsion/tank[1]/contents-lbs") < 1650) or ((getprop("systems/electrical/bus/dc-2") < 25 and (getprop("systems/failures/elac1") == 1 or getprop("systems/failures/sec1") == 1)) or (getprop("systems/hydraulic/green-psi") < 1500 and (getprop("systems/failures/elac1") == 1 and getprop("systems/failures/sec1") == 1)) or (getprop("systems/hydraulic/yellow-psi") < 1500 and (getprop("systems/failures/elac1") == 1 and getprop("systems/failures/sec1") == 1)) or (getprop("systems/hydraulic/blue-psi") < 1500 and (getprop("systems/failures/elac2") == 1 and getprop("systems/failures/sec2") == 1))) or (phaseVar >= 3 and phaseVar <= 8 and (getprop("engines/engine[0]/state") != 3 or getprop("engines/engine[1]/state") != 3)))) {
2019-10-14 16:48:35 +00:00
land_asap_a.active = 1;
} else {
land_asap_a.active = 0;
}
if (libraries.ap_active == 1 and apWarn.getValue() == 1) {
ap_off.active = 1;
} else {
ap_off.active = 0;
}
if (libraries.athr_active == 1 and athrWarn.getValue() == 1) {
athr_off.active = 1;
} else {
athr_off.active = 0;
}
if ((phaseVar >= 2 and phaseVar <= 7) and getprop("controls/flight/speedbrake") != 0) {
spd_brk.active = 1;
} else {
spd_brk.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/thrust/state1") == "IDLE" and getprop("systems/thrust/state2") == "IDLE" and phaseVar >= 6 and phaseVar <= 7) {
2019-10-14 16:48:35 +00:00
spd_brk.colour = "g";
2020-02-07 16:10:54 +00:00
} else if ((phaseVar >= 2 and phaseVar <= 5) or ((getprop("systems/thrust/state1") != "IDLE" or getprop("systems/thrust/state2") != "IDLE") and (phaseVar >= 6 and phaseVar <= 7))) {
2019-10-14 16:48:35 +00:00
spd_brk.colour = "a";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/gear/brake-parking") == 1 and phaseVar != 3) {
2019-10-14 16:48:35 +00:00
park_brk.active = 1;
} else {
park_brk.active = 0;
}
if (phaseVar >= 4 and phaseVar <= 8) {
park_brk.colour = "a";
} else {
park_brk.colour = "g";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/gear/brake-fans") == 1) {
2020-01-04 22:36:43 +00:00
brk_fan.active = 1;
} else {
brk_fan.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/hydraulic/ptu") == 1 and ((getprop("systems/hydraulic/yellow-psi") < 1450 and getprop("systems/hydraulic/green-psi") > 1450 and getprop("controls/hydraulic/elec-pump-yellow") == 0) or (getprop("systems/hydraulic/yellow-psi") > 1450 and getprop("systems/hydraulic/green-psi") < 1450))) {
2019-10-14 16:48:35 +00:00
ptu.active = 1;
} else {
ptu.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/hydraulic/sources/rat/position") != 0) {
2019-10-14 16:48:35 +00:00
rat.active = 1;
} else {
rat.active = 0;
}
if (phaseVar >= 1 and phaseVar <= 2) {
rat.colour = "a";
} else {
rat.colour = "g";
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/electrical/relay/emer-glc/contact-pos") == 1 and getprop("systems/hydraulic/sources/rat/position") != 0 and getprop("gear/gear[1]/wow") == 0) {
2019-10-14 16:48:35 +00:00
emer_gen.active = 1;
} else {
emer_gen.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("sim/model/autopush/enabled") == 1) { # this message is only on when towing - not when disc with switch
2019-10-14 16:48:35 +00:00
nw_strg_disc.active = 1;
} else {
nw_strg_disc.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("engines/engine[0]/state") == 3 or getprop("engines/engine[1]/state") == 3) {
2019-10-14 16:48:35 +00:00
nw_strg_disc.colour = "a";
} else {
nw_strg_disc.colour = "g";
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/pneumatic/switches/ram-air") == 1) {
2019-10-14 16:48:35 +00:00
ram_air.active = 1;
} else {
ram_air.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/engines/engine[0]/igniter-a") == 1 or getprop("controls/engines/engine[0]/igniter-b") == 1 or getprop("controls/engines/engine[1]/igniter-a") == 1 or getprop("controls/engines/engine[1]/igniter-b") == 1) {
2019-10-14 16:48:35 +00:00
ignition.active = 1;
} else {
ignition.active = 0;
}
2020-04-17 22:41:36 +00:00
if (getprop("controls/pneumatic/switches/bleedapu") == 1 and getprop("engines/engine[2]/n1") >= 95) {
2019-10-14 16:48:35 +00:00
apu_bleed.active = 1;
} else {
apu_bleed.active = 0;
}
2020-04-17 22:41:36 +00:00
if (apu_bleed.active == 0 and getprop("engines/engine[2]/n1") >= 95) {
2019-10-14 16:48:35 +00:00
apu_avail.active = 1;
} else {
apu_avail.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/lighting/landing-lights[1]") > 0 or getprop("controls/lighting/landing-lights[2]") > 0) {
2019-10-14 16:48:35 +00:00
ldg_lt.active = 1;
} else {
ldg_lt.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/switches/leng") == 1 or getprop("controls/switches/reng") == 1 or getprop("systems/electrical/bus/dc-1") == 0 or getprop("systems/electrical/bus/dc-2") == 0) {
2019-10-14 16:48:35 +00:00
eng_aice.active = 1;
} else {
eng_aice.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/switches/wing") == 1) {
2019-10-14 16:48:35 +00:00
wing_aice.active = 1;
} else {
wing_aice.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("instrumentation/comm[2]/frequencies/selected-mhz") != 0 and (phaseVar == 1 or phaseVar == 2 or phaseVar == 6 or phaseVar == 9 or phaseVar == 10)) {
2019-10-14 16:48:35 +00:00
vhf3_voice.active = 1;
} else {
vhf3_voice.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/autobrake/mode") == 1 and (phaseVar == 7 or phaseVar == 8)) {
2019-10-14 16:48:35 +00:00
auto_brk_lo.active = 1;
} else {
auto_brk_lo.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/autobrake/mode") == 2 and (phaseVar == 7 or phaseVar == 8)) {
2019-10-14 16:48:35 +00:00
auto_brk_med.active = 1;
} else {
auto_brk_med.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("controls/autobrake/mode") == 3 and (phaseVar == 7 or phaseVar == 8)) {
2019-10-14 16:48:35 +00:00
auto_brk_max.active = 1;
} else {
auto_brk_max.active = 0;
}
2020-02-07 16:10:54 +00:00
if (getprop("systems/fuel/valves/crossfeed-valve") != 0 and getprop("controls/fuel/switches/crossfeed") == 1) {
2019-10-14 16:48:35 +00:00
fuelx.active = 1;
} else {
fuelx.active = 0;
}
if (phaseVar >= 3 and phaseVar <= 5) {
fuelx.colour = "a";
} else {
fuelx.colour = "g";
}
2020-02-07 16:10:54 +00:00
if (getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override") == 1) { # todo: emer elec
2019-10-14 16:48:35 +00:00
gpws_flap3.active = 1;
} else {
gpws_flap3.active = 0;
}
2020-02-07 16:10:54 +00:00
if (phaseVar >= 2 and phaseVar <= 9 and systems.ELEC.Bus.ac1.getValue() >= 110 and systems.ELEC.Bus.ac2.getValue() >= 110 and (getprop("systems/fuel/feed-center-1") or getprop("systems/fuel/feed-center-2"))) {
2019-10-14 16:48:35 +00:00
ctr_tk_feedg.active = 1;
} else {
ctr_tk_feedg.active = 0;
}
}
# Listeners
2019-11-30 13:39:53 +00:00
setlistener("/controls/fctl/switches/fac1", func() {
2019-10-14 16:48:35 +00:00
if (dualFail.active == 0 and emerconfig.active == 0) { return; }
if (fac1Node.getBoolValue() and dualFail.active == 1) {
dualFailFACActive = 0;
} else {
dualFailFACActive = 1;
}
if (fac1Node.getBoolValue() and emerconfig.active == 1) {
emerConfigFACActive = 0;
} else {
emerConfigFACActive = 1;
}
}, 0, 0);
setlistener("/engines/engine[0]/state", func() {
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
dualFailNode.setBoolValue(1);
} else {
dualFailNode.setBoolValue(0);
}
}, 0, 0);
setlistener("/engines/engine[1]/state", func() {
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
dualFailNode.setBoolValue(1);
} else {
dualFailNode.setBoolValue(0);
}
2020-01-06 21:31:14 +00:00
}, 0, 0);