fly/A320-family
1
0
Fork 0
Code Activity
A320-family/Systems/a320-electrical.xml

2143 lines
72 KiB
XML
Raw Normal View History

A320-family fork
2019-10-14 16:48:35 +00:00
<?xml version="1.0"?>
<!-- Copyright (c) 2019 Jonathan Redpath (legoboyvdlp), Joshua Davidson (Octal450) -->
<system name="A320: Electrical">
Fix SEC power source, fix RAT getting retracted, fix other stuff
2019-12-28 20:55:18 +00:00
<property value="0">/systems/electrical/some-electric-thingie/rat-deploy</property>
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
<property value="0">/systems/electrical/relay/gen-1-glc/contact-pos</property>
<property value="0">/systems/electrical/relay/gen-2-glc/contact-pos</property>
Fix SEC power source, fix RAT getting retracted, fix other stuff
2019-12-28 20:55:18 +00:00
A320-family fork
2019-10-14 16:48:35 +00:00
<channel name="Main Electrical" execrate="8">
<!-- Battery 1 -->
<fcs_function name="/systems/electrical/sources/bat-1/volt">
<function>
New battery charging logic
2020-05-03 16:13:49 +00:00
<product>
<difference>
<value>1</value>
<product>
<property>/systems/electrical/sources/bat-1/amps</property>
<value>0.00016666</value>
</product>
</difference>
<table>
<independentVar lookup="row">/systems/electrical/sources/bat-1/percent</independentVar>
<independentVar lookup="column">/systems/failures/electrical/bat-1</independentVar>
<tableData>
0 1
0 0.0 0.0
10 24.0 4.0
50 25.5 5.0
100 31.0 7.0
</tableData>
</table>
</product>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
New battery charging logic
2020-05-03 16:13:49 +00:00
<switch name="/systems/electrical/sources/bat-1/contact">
<default value="/systems/electrical/sources/bat-1/contact"/>
<test logic="OR" value="0"> <!-- discharge protection or switch turned off -->
/controls/electrical/switches/bat-1 eq 0
/systems/electrical/sources/bat-1/volt lt 23
/systems/electrical/sources/bat-1/amps ge 100
</test>
<test logic="AND" value="1"> <!-- apu start -->
/controls/electrical/switches/bat-1 eq 1
/systems/apu/start eq 1
</test>
<test logic="AND" value="1"> <!-- connect to dc-bat while no other power on the ground -->
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/bat-1 eq 1
New battery charging logic
2020-05-03 16:13:49 +00:00
/systems/electrical/bus/ac-1 lt 110
/systems/electrical/bus/ac-2 lt 110
/gear/gear[1]/wow eq 1
/instrumentation/airspeed-indicator/indicated-speed-kt lt 100
</test>
<test logic="AND" value="1"> <!-- start charging cycle -->
/systems/electrical/sources/bat-1/charge eq 1
</test>
<test logic="AND" value="1"> <!-- maintain charging cycle -->
/systems/electrical/sources/bat-1/charge eq 1
/controls/electrical/switches/bat-1 eq 1
/systems/electrical/sources/bat-1/contact eq 1
/systems/electrical/bus/dc-bat gt 27.5
/systems/electrical/sources/bat-1/percent-calc lt 99.9
</test>
<test logic="AND" value="0">
/systems/electrical/sources/bat-1/charge eq 0
</test>
</switch>
<switch name="/systems/electrical/sources/bat-1/charge">
<default value="/systems/electrical/sources/bat-1/charge"/>
<test logic="AND" value="0"> <!-- end charging cycle -->
/systems/electrical/sources/bat-1/charge eq 1
<test logic="OR">
/controls/electrical/switches/bat-1 eq 0
/systems/electrical/bus/dc-bat lt 27.5
/systems/electrical/sources/bat-1/percent-calc ge 99.9
</test>
</test>
<test logic="AND" value="1"> <!-- start charging cycle -->
/controls/electrical/switches/bat-1 eq 1
/systems/electrical/sources/bat-1/contact eq 0
/systems/electrical/sources/bat-1/volt lt 26.5
/systems/electrical/bus/dc-bat gt 27.5
</test>
</switch>
<switch name="/systems/electrical/sources/bat-1/direction">
<default value="0"/>
Make the batteries drain when static inverter is active
2020-05-03 16:24:03 +00:00
<test logic="AND" value="0">
New battery charging logic
2020-05-03 16:13:49 +00:00
/systems/electrical/sources/bat-1/contact eq 0
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 0
Make the batteries drain when static inverter is active
2020-05-03 16:24:03 +00:00
</test>
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 1
New battery charging logic
2020-05-03 16:13:49 +00:00
</test>
<test logic="AND" value="1"> <!-- drain -->
/systems/electrical/sources/bat-1/contact eq 1
<test logic="OR">
<test logic="AND">
/systems/electrical/bus/dc-bat-src ne 1
/systems/electrical/bus/dc-bat-src ne 2
</test>
/systems/apu/start eq 1
</test>
</test>
<test logic="AND" value="-1"> <!-- charge -->
/systems/electrical/sources/bat-1/contact eq 1
/systems/electrical/bus/dc-bat-src ne 3
</test>
</switch>
<fcs_function name="/systems/electrical/sources/bat-1/percent-calc">
<function>
<ifthen>
<eq>
<property>/systems/electrical/sources/bat-1/direction</property>
<value>0</value>
</eq>
<property>/systems/electrical/sources/bat-1/percent-calc</property>
<ifthen>
<eq>
<property>/systems/electrical/sources/bat-1/direction</property>
<value>-1</value>
</eq>
<sum>
<property>/systems/electrical/sources/bat-1/percent</property>
<product>
<quotient>
<value>2.25</value>
<sum>
<property>/systems/electrical/sources/bat-1/percent</property>
<value>1</value>
</sum>
</quotient>
<property>simulation/channel-dt</property>
</product>
</sum>
<sum>
<property>/systems/electrical/sources/bat-1/percent</property>
<product>
<quotient>
<value>-0.75</value>
<sum>
<property>/systems/electrical/sources/bat-1/percent</property>
<value>1</value>
</sum>
</quotient>
<property>simulation/channel-dt</property>
</product>
</sum>
</ifthen>
</ifthen>
</function>
<output>/systems/electrical/sources/bat-1/percent</output>
</fcs_function>
<switch name="/systems/electrical/sources/bat-1/load-kw">
<default value="0"/>
<test logic="AND" value="0.864">
/systems/apu/start eq 1
/systems/electrical/sources/bat-1/contact eq 1
</test>
<test logic="AND" value="1.15"> <!-- 60 amp * 0.8 * 24V = 1.15kw. Guess -->
/systems/electrical/bus/dc-bat-src ne 1
/systems/electrical/bus/dc-bat-src ne 2
/systems/electrical/sources/bat-1/contact eq 1
</test>
</switch>
<switch name="/systems/electrical/sources/bat-1/amps">
<default value="0"/>
<test logic="AND" value="40">
/systems/electrical/sources/bat-1/load-kw ne 0
Fix battery percent
2020-08-13 18:54:58 +00:00
/systems/electrical/sources/bat-1/direction eq 1
New battery charging logic
2020-05-03 16:13:49 +00:00
</test>
<test logic="AND" value="2">
/systems/electrical/sources/bat-1/contact eq 1
Fix battery percent
2020-08-13 18:54:58 +00:00
/systems/electrical/sources/bat-1/direction eq -1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<!-- Battery 2 -->
<fcs_function name="/systems/electrical/sources/bat-2/volt">
<function>
New battery charging logic
2020-05-03 16:13:49 +00:00
<product>
<difference>
<value>1</value>
<product>
<property>/systems/electrical/sources/bat-2/amps</property>
<value>0.00016666</value>
</product>
</difference>
<table>
<independentVar lookup="row">/systems/electrical/sources/bat-2/percent</independentVar>
<independentVar lookup="column">/systems/failures/electrical/bat-2</independentVar>
<tableData>
0 1
0 0.0 0.0
10 24.0 4.0
50 25.5 5.0
100 31.0 7.0
</tableData>
</table>
</product>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
New battery charging logic
2020-05-03 16:13:49 +00:00
<switch name="/systems/electrical/sources/bat-2/contact">
<default value="/systems/electrical/sources/bat-2/contact"/>
<test logic="OR" value="0"> <!-- discharge protection or switch turned off -->
/controls/electrical/switches/bat-2 eq 0
/systems/electrical/sources/bat-2/volt lt 23
/systems/electrical/sources/bat-2/amps ge 100
</test>
<test logic="AND" value="1"> <!-- apu start -->
/controls/electrical/switches/bat-2 eq 1
/systems/apu/start eq 1
</test>
<test logic="AND" value="1"> <!-- connect to dc-bat while no other power on the ground -->
/controls/electrical/switches/bat-2 eq 1
/systems/electrical/bus/ac-1 lt 110
/systems/electrical/bus/ac-2 lt 110
/gear/gear[1]/wow eq 1
/instrumentation/airspeed-indicator/indicated-speed-kt lt 100
</test>
<test logic="AND" value="1"> <!-- start charging cycle -->
/systems/electrical/sources/bat-2/charge eq 1
</test>
<test logic="AND" value="1"> <!-- maintain charging cycle -->
/systems/electrical/sources/bat-2/charge eq 1
/controls/electrical/switches/bat-2 eq 1
/systems/electrical/sources/bat-2/contact eq 1
/systems/electrical/bus/dc-bat gt 27.5
/systems/electrical/sources/bat-2/percent-calc lt 99.9
</test>
<test logic="AND" value="0">
/systems/electrical/sources/bat-2/charge eq 0
</test>
</switch>
<switch name="/systems/electrical/sources/bat-2/charge">
<default value="/systems/electrical/sources/bat-2/charge"/>
<test logic="AND" value="0"> <!-- end charging cycle -->
/systems/electrical/sources/bat-2/charge eq 1
<test logic="OR">
/controls/electrical/switches/bat-2 eq 0
/systems/electrical/bus/dc-bat lt 27.5
/systems/electrical/sources/bat-2/percent-calc ge 99.9
</test>
</test>
<test logic="AND" value="1"> <!-- start charging cycle -->
/controls/electrical/switches/bat-2 eq 1
/systems/electrical/sources/bat-2/contact eq 0
/systems/electrical/sources/bat-2/volt lt 26.5
/systems/electrical/bus/dc-bat gt 27.5
</test>
</switch>
<switch name="/systems/electrical/sources/bat-2/direction">
<default value="0"/>
Make the batteries drain when static inverter is active
2020-05-03 16:24:03 +00:00
<test logic="AND" value="0">
New battery charging logic
2020-05-03 16:13:49 +00:00
/systems/electrical/sources/bat-2/contact eq 0
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 0
Make the batteries drain when static inverter is active
2020-05-03 16:24:03 +00:00
</test>
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 1
New battery charging logic
2020-05-03 16:13:49 +00:00
</test>
<test logic="AND" value="1"> <!-- drain -->
/systems/electrical/sources/bat-2/contact eq 1
<test logic="OR">
<test logic="AND">
/systems/electrical/bus/dc-bat-src ne 1
/systems/electrical/bus/dc-bat-src ne 2
</test>
/systems/apu/start eq 1
</test>
</test>
<test logic="AND" value="-1"> <!-- charge -->
/systems/electrical/sources/bat-2/contact eq 1
/systems/electrical/bus/dc-bat-src ne 3
</test>
</switch>
<fcs_function name="/systems/electrical/sources/bat-2/percent-calc">
<function>
<ifthen>
<eq>
<property>/systems/electrical/sources/bat-2/direction</property>
<value>0</value>
</eq>
<property>/systems/electrical/sources/bat-2/percent-calc</property>
<ifthen>
<eq>
<property>/systems/electrical/sources/bat-2/direction</property>
<value>-1</value>
</eq>
<sum>
<property>/systems/electrical/sources/bat-2/percent</property>
<product>
<quotient>
<value>2.25</value>
<sum>
<property>/systems/electrical/sources/bat-2/percent</property>
<value>1</value>
</sum>
</quotient>
<property>simulation/channel-dt</property>
</product>
</sum>
<sum>
<property>/systems/electrical/sources/bat-2/percent</property>
<product>
<quotient>
<value>-0.75</value>
<sum>
<property>/systems/electrical/sources/bat-2/percent</property>
<value>1</value>
</sum>
</quotient>
<property>simulation/channel-dt</property>
</product>
</sum>
</ifthen>
</ifthen>
</function>
<output>/systems/electrical/sources/bat-2/percent</output>
</fcs_function>
<switch name="/systems/electrical/sources/bat-2/load-kw">
A320-family fork
2019-10-14 16:48:35 +00:00
<default value="0"/>
New battery charging logic
2020-05-03 16:13:49 +00:00
<test logic="AND" value="0.864">
/systems/apu/start eq 1
/systems/electrical/sources/bat-2/contact eq 1
</test>
<test logic="AND" value="1.15"> <!-- 60 amp * 0.8 * 24V = 1.15kw. Guess -->
/systems/electrical/bus/dc-bat-src ne 1
/systems/electrical/bus/dc-bat-src ne 2
/systems/electrical/sources/bat-2/contact eq 1
</test>
</switch>
<switch name="/systems/electrical/sources/bat-2/amps">
<default value="0"/>
<test logic="AND" value="40">
/systems/electrical/sources/bat-2/load-kw ne 0
Fix battery percent
2020-08-13 18:54:58 +00:00
/systems/electrical/sources/bat-2/direction eq 1
New battery charging logic
2020-05-03 16:13:49 +00:00
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="2">
New battery charging logic
2020-05-03 16:13:49 +00:00
/systems/electrical/sources/bat-2/contact eq 1
Fix battery percent
2020-08-13 18:54:58 +00:00
/systems/electrical/sources/bat-2/direction eq -1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<!-- IDG 1 -->
<pure_gain name="/systems/electrical/sources/idg-1/drive-rpm-input">
<input>/engines/engine[0]/n2-actual</input>
<gain>90.298</gain> <!-- 1% N2 RPM value * 0.604 -->
</pure_gain>
<switch name="/systems/electrical/sources/idg-1/working">
<default value="1"/>
<test logic="OR" value="0">
/systems/failures/electrical/idg-1 eq 1
/controls/electrical/switches/idg-1-disc eq 0
</test>
</switch>
<pure_gain name="/systems/electrical/sources/idg-1/drive-rpm">
<input>/systems/electrical/sources/idg-1/drive-rpm-input</input>
<gain>/systems/electrical/sources/idg-1/working</gain>
</pure_gain>
<fcs_function name="/systems/electrical/sources/idg-1/csd-gearbox-ratio-cmd">
<function>
<quotient>
<value>12000</value>
<property>/systems/electrical/sources/idg-1/drive-rpm</property>
</quotient>
</function>
<clipto>
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<min>1.315</min>
<max>2.667</max>
A320-family fork
2019-10-14 16:48:35 +00:00
</clipto>
</fcs_function>
<lag_filter name="/systems/electrical/sources/idg-1/csd-gearbox-ratio">
<input>/systems/electrical/sources/idg-1/csd-gearbox-ratio-cmd</input>
<c1>40</c1>
</lag_filter>
<pure_gain name="/systems/electrical/sources/idg-1/csd-rpm">
<input>/systems/electrical/sources/idg-1/drive-rpm</input>
<gain>/systems/electrical/sources/idg-1/csd-gearbox-ratio</gain>
</pure_gain>
<fcs_function name="/systems/electrical/sources/idg-1/pmg-volt">
<function>
<product>
<property>/systems/electrical/sources/idg-1/csd-rpm</property>
<quotient>
<value>115</value>
<value>12000</value>
</quotient>
</product>
</function>
</fcs_function>
<fcs_function name="/systems/electrical/sources/idg-1/pmg-hertz">
<function>
<quotient>
<product>
<property>/systems/electrical/sources/idg-1/csd-rpm</property>
<value>4</value> <!-- Number of poles in generator -->
</product>
<value>120</value>
</quotient>
</function>
</fcs_function>
<switch name="/systems/electrical/sources/idg-1/gcr-relay">
<default value="0"/>
<test logic="AND" value="1">
/systems/failures/electrical/gen-1 ne 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/controls/engines/engine[0]/fire-btn eq 0
/systems/electrical/sources/idg-1/drive-rpm ge 4730
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<pure_gain name="/systems/electrical/sources/idg-1/output-volt">
<input>/systems/electrical/sources/idg-1/pmg-volt</input>
<gain>/systems/electrical/sources/idg-1/gcr-relay</gain>
</pure_gain>
<pure_gain name="/systems/electrical/sources/idg-1/output-hertz">
<input>/systems/electrical/sources/idg-1/pmg-hertz</input>
<gain>/systems/electrical/sources/idg-1/gcr-relay</gain>
</pure_gain>
<!-- IDG 2 -->
<pure_gain name="/systems/electrical/sources/idg-2/drive-rpm-input">
<input>/engines/engine[1]/n2-actual</input>
<gain>90.298</gain> <!-- 1% N2 RPM value * 0.604 -->
</pure_gain>
<switch name="/systems/electrical/sources/idg-2/working">
<default value="1"/>
<test logic="OR" value="0">
/systems/failures/electrical/idg-2 eq 1
/controls/electrical/switches/idg-2-disc eq 0
</test>
</switch>
<pure_gain name="/systems/electrical/sources/idg-2/drive-rpm">
<input>/systems/electrical/sources/idg-2/drive-rpm-input</input>
<gain>/systems/electrical/sources/idg-2/working</gain>
</pure_gain>
<fcs_function name="/systems/electrical/sources/idg-2/csd-gearbox-ratio-cmd">
<function>
<quotient>
<value>12000</value>
<property>/systems/electrical/sources/idg-2/drive-rpm</property>
</quotient>
</function>
<clipto>
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<min>1.315</min>
<max>2.667</max>
A320-family fork
2019-10-14 16:48:35 +00:00
</clipto>
</fcs_function>
<lag_filter name="/systems/electrical/sources/idg-2/csd-gearbox-ratio">
<input>/systems/electrical/sources/idg-2/csd-gearbox-ratio-cmd</input>
<c1>40</c1>
</lag_filter>
<pure_gain name="/systems/electrical/sources/idg-2/csd-rpm">
<input>/systems/electrical/sources/idg-2/drive-rpm</input>
<gain>/systems/electrical/sources/idg-2/csd-gearbox-ratio</gain>
</pure_gain>
<fcs_function name="/systems/electrical/sources/idg-2/pmg-volt">
<function>
<product>
<property>/systems/electrical/sources/idg-2/csd-rpm</property>
<quotient>
<value>115</value>
<value>12000</value>
</quotient>
</product>
</function>
</fcs_function>
<fcs_function name="/systems/electrical/sources/idg-2/pmg-hertz">
<function>
<quotient>
<product>
<property>/systems/electrical/sources/idg-2/csd-rpm</property>
<value>4</value> <!-- Number of poles in generator -->
</product>
<value>120</value>
</quotient>
</function>
</fcs_function>
<switch name="/systems/electrical/sources/idg-2/gcr-relay">
<default value="0"/>
<test logic="AND" value="1">
/systems/failures/electrical/gen-2 ne 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/controls/engines/engine[1]/fire-btn eq 0
/systems/electrical/sources/idg-2/drive-rpm ge 4730
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<pure_gain name="/systems/electrical/sources/idg-2/output-volt">
<input>/systems/electrical/sources/idg-2/pmg-volt</input>
<gain>/systems/electrical/sources/idg-2/gcr-relay</gain>
</pure_gain>
<pure_gain name="/systems/electrical/sources/idg-2/output-hertz">
<input>/systems/electrical/sources/idg-2/pmg-hertz</input>
<gain>/systems/electrical/sources/idg-2/gcr-relay</gain>
</pure_gain>
<!-- APU gen -->
Same thing for APU
2020-10-14 14:08:29 +00:00
<pure_gain name="/systems/electrical/sources/apu/drive-rpm">
JSBSim apu
2020-04-14 17:07:01 +00:00
<input>/engines/engine[2]/n1</input>
<gain>240.34</gain>
A320-family fork
2019-10-14 16:48:35 +00:00
</pure_gain>
<fcs_function name="/systems/electrical/sources/apu/pmg-volt">
<function>
<product>
Same thing for APU
2020-10-14 14:08:29 +00:00
<property>/systems/electrical/sources/apu/drive-rpm</property>
A320-family fork
2019-10-14 16:48:35 +00:00
<quotient>
<value>115</value>
<value>24000</value>
</quotient>
</product>
</function>
</fcs_function>
<fcs_function name="/systems/electrical/sources/apu/pmg-hertz">
<function>
<quotient>
<product>
Same thing for APU
2020-10-14 14:08:29 +00:00
<property>/systems/electrical/sources/apu/drive-rpm</property>
A320-family fork
2019-10-14 16:48:35 +00:00
<value>2</value> <!-- Number of poles in generator -->
</product>
<value>120</value>
</quotient>
</function>
</fcs_function>
<switch name="/systems/electrical/sources/apu/gcr-relay">
<default value="0"/>
<test logic="AND" value="1">
Same thing for APU
2020-10-14 14:08:29 +00:00
/controls/apu/fire-btn ne 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/apu eq 1
/systems/failures/electrical/apu ne 1
Same thing for APU
2020-10-14 14:08:29 +00:00
/systems/electrical/sources/apu/drive-rpm ge 22800
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<pure_gain name="/systems/electrical/sources/apu/output-volt">
<input>/systems/electrical/sources/apu/pmg-volt</input>
<gain>/systems/electrical/sources/apu/gcr-relay</gain>
</pure_gain>
<pure_gain name="/systems/electrical/sources/apu/output-hertz">
<input>/systems/electrical/sources/apu/pmg-hertz</input>
<gain>/systems/electrical/sources/apu/gcr-relay</gain>
</pure_gain>
<!-- External Power -->
<fcs_function name="/systems/electrical/sources/ext/output-volt">
<function>
<ifthen>
<eq>
<property>/controls/electrical/ground-cart</property>
<value>1</value>
</eq>
<value>115</value>
<value>0</value>
</ifthen>
</function>
</fcs_function>
<fcs_function name="/systems/electrical/sources/ext/output-hertz">
<function>
<ifthen>
<ge>
<property>/systems/electrical/sources/ext/output-volt</property>
<value>110</value>
</ge>
<value>400</value>
<value>0</value>
</ifthen>
</function>
</fcs_function>
<!-- Static Inverter -->
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<switch name="/systems/electrical/sources/si-1/inverter-control/relay-7xb"> <!-- 7XB -->
A320-family fork
2019-10-14 16:48:35 +00:00
<default value="0"/>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<test logic="OR" value="1">
/systems/navigation/adr/output/cas-1 gt 50
/controls/electrical/switches/emer-gen-test eq 1
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
</test>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
</switch>
<switch name="/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-through-7XB">
<default value="0"/>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-7xb eq 0
/systems/electrical/sources/bat-1/contact eq 1
/systems/electrical/sources/bat-2/contact eq 1
/systems/electrical/bus/dc-hot-2 ge 23
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-7xb eq 1
/systems/electrical/bus/dc-hot-2 ge 23
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
</switch>
<switch name="/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-to-timer">
<default value="0"/>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-through-7XB eq 1
/systems/electrical/bus/ac-1 lt 110
/systems/electrical/bus/ac-2 lt 110
/systems/electrical/relay/emer-glc/output lt 110
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<actuator name="/systems/electrical/sources/si-1/inverter-control/timer">
<input>/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-to-timer</input>
<rate_limit sense="decr">120</rate_limit> <!-- Instant -->
<rate_limit sense="incr">12.5</rate_limit> <!-- 80 milliseconds -->
</actuator>
<switch name="/systems/electrical/sources/si-1/inverter-control/relay-2xb"> <!-- 2XB --> <!-- CONTROLS DC HOT 2 TO DC ESS, DC HOT 1 to STAT INV -->
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/sources/si-1/inverter-control/timer eq 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<fcs_function name="/systems/electrical/sources/si-1/inverter-gain">
<function>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<product>
<ifthen>
<eq>
<property>/systems/failures/electrical/stat-inv</property>
<value>1</value>
</eq>
<value>0</value>
<quotient>
<value>115</value>
<property>/systems/electrical/sources/bat-1/volt</property>
</quotient>
</ifthen>
<property>/systems/electrical/sources/si-1/inverter-control/relay-2xb</property>
</product>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<switch name="/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-to-ac-ess-contactor">
<default value="0"/>
<test logic="AND" value="1"> <!-- todo CB 10XE -->
/systems/electrical/sources/si-1/inverter-control/relay-7xb eq 1
/systems/electrical/relay/ac-ess-feed-1/output lt 110
/systems/electrical/relay/ac-ess-feed-2/output lt 110
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<pure_gain name="/systems/electrical/sources/si-1/output-volt">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<input>/systems/electrical/sources/bat-1/volt</input>
A320-family fork
2019-10-14 16:48:35 +00:00
<gain>/systems/electrical/sources/si-1/inverter-gain</gain>
</pure_gain>
Fix pushbutton sound volume; fix lower ecam typo. Prepare to add static inverter fault
2020-10-13 20:45:48 +00:00
<switch name="/systems/electrical/sources/si-1/fault">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/sources/bat-1/volt lt 23.5
/systems/electrical/sources/si-1/output-volt lt 110
/systems/electrical/sources/si-1/output-volt ge 120
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/sources/si-1/output-hertz">
<default value="0"/>
<test logic="AND" value="400">
/systems/electrical/sources/si-1/output-volt ge 110
</test>
</switch>
<!-- Emergency Generator -->
<switch name="/systems/electrical/some-electric-thingie/rat-deploy">
Bugfixes, new CLR function, fix FBW -> autopilot failures, etc
2020-01-02 21:13:18 +00:00
<default value="/systems/electrical/some-electric-thingie/rat-deploy"/>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
/instrumentation/airspeed-indicator/indicated-speed-kt gt 100
Potential fix for RAT popping out when it shouldn't
2020-03-21 13:54:05 +00:00
/sim/time/elapsed-sec gt 30
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/bus/ac-1 eq 0
/systems/electrical/bus/ac-2 eq 0
/controls/electrical/switches/emer-elec-man-on eq 0
</test>
<test logic="OR" value="1">
Add hydraulic system; bugfix IESI, fixes for the ECAM
2019-10-15 15:46:38 +00:00
/controls/hydraulic/switches/rat-man eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-elec-man-on eq 1
</test>
Fix SEC power source, fix RAT getting retracted, fix other stuff
2019-12-28 20:55:18 +00:00
<!--<test value="0">
/controls/hydraulic/switches/ground-rat-retraction eq 1
</test>-->
A320-family fork
2019-10-14 16:48:35 +00:00
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-gen-operate">
<default value="0"/>
<test logic="AND" value="1">
/controls/electrical/switches/emer-gen-test eq 1
/systems/electrical/bus/ac-1 ne 0
/systems/electrical/bus/ac-2 ne 0
</test>
<test logic="AND" value="1">
Correction to electrical power on batteries only on the ground
2020-07-26 16:56:09 +00:00
/instrumentation/airspeed-indicator/indicated-speed-kt ge 100
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/bus/ac-1 eq 0
/systems/electrical/bus/ac-2 eq 0
gear/unit[0]/WOW eq 0
/controls/electrical/switches/emer-elec-man-on eq 0
</test>
<test logic="AND" value="1">
gear/unit[0]/WOW eq 0
/controls/electrical/switches/emer-elec-man-on eq 1
</test>
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-gen-operating-on-rat">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/some-electric-thingie/emer-gen-operate eq 1
Add hydraulic system; bugfix IESI, fixes for the ECAM
2019-10-15 15:46:38 +00:00
/systems/hydraulic/sources/rat/position eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
<test logic="AND" value="1">
/controls/electrical/switches/emer-gen-test eq 1
/systems/electrical/bus/ac-1 ne 0
/systems/electrical/bus/ac-2 ne 0
</test>
</switch>
<kinematic name="/systems/electrical/sources/emer-gen/coupled-kin">
<input>/systems/electrical/some-electric-thingie/emer-gen-operating-on-rat</input>
<traverse>
<setting>
<position>0.0</position>
<time>0.0</time>
</setting>
<setting>
<position>1.0</position>
<time>5.5</time>
</setting>
</traverse>
</kinematic>
<switch name="/systems/electrical/sources/emer-gen/coupled">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/emer-gen/coupled-kin eq 1
/systems/failures/electrical/emer-gen ne 1
</test>
<test logic="AND" value="1">
/controls/electrical/switches/emer-gen-test eq 1
/systems/failures/electrical/emer-gen ne 1
/systems/electrical/bus/ac-1 ne 0
/systems/electrical/bus/ac-2 ne 0
</test>
</switch>
<!-- Regulated to 115V, no point doing fancy, HYD controls it -->
<switch name="/systems/electrical/sources/emer-gen/output-volt">
<default value="0"/>
<test logic="AND" value="115">
/systems/electrical/some-electric-thingie/emer-gen-operate eq 1
/systems/electrical/sources/emer-gen/coupled eq 1
/systems/hydraulic/blue-psi ge 2500
/systems/failures/electrical/emer-gen eq 0
</test>
</switch>
<switch name="/systems/electrical/sources/emer-gen/output-hertz">
<default value="0"/>
<test logic="AND" value="400">
/systems/electrical/sources/emer-gen/output-volt ge 110
</test>
</switch>
<!-- Source Relays -->
Electrical: GCU should be powered by PMG or by DC BAT bus. Therefore, you can control with GEN pb sw if you have PMG volts _or_ if you have DC BAT. Also, disc power is on DC BAT, not DC ESS, even though indication is on ESS. Typically weird Airbus
2020-10-13 23:32:24 +00:00
<switch name="/systems/electrical/sources/idg-1/gcu-1-powered">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/bus/dc-bat ge 25
/systems/electrical/sources/idg-1/pmg-volt ge 110
</test>
</switch>
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
<switch name="/systems/electrical/sources/idg-1/gcu-1-voltage-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/idg-1/gcu-1-voltage-trip eq 1
/controls/electrical/switches/gen-1 eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/gen-1-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/idg-1/output-volt lt 110
/systems/electrical/sources/idg-1/output-volt gt 130
</test>
</test>
</switch>
<switch name="/systems/electrical/sources/idg-1/gcu-1-frequency-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/idg-1/gcu-1-frequency-trip eq 1
/controls/electrical/switches/gen-1 eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/gen-1-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/idg-1/output-hertz lt 363
/systems/electrical/sources/idg-1/output-hertz gt 433
</test>
</test>
</switch>
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<switch name="/systems/electrical/sources/idg-1/gcu-1-fault">
<default value="0"/>
<test logic="OR" value="0">
/systems/acconfig/autoconfig-running eq 1
/sim/time/elapsed-sec lt 10
</test>
<test logic="OR" value="1">
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
/systems/electrical/sources/idg-1/gcu-1-voltage-trip eq 1
/systems/electrical/sources/idg-1/gcu-1-frequency-trip eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/systems/electrical/sources/idg-1/drive-rpm lt 4730
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/gen-1-glc/contact-pos">
<default value="0"/>
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
<test logic="OR" value="0">
/sim/time/elapsed-sec lt 10
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
/controls/electrical/switches/gen-1 eq 1
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
/systems/electrical/sources/idg-1/output-hertz ge 363
/systems/electrical/sources/idg-1/output-hertz le 433
/systems/electrical/sources/idg-1/output-volt ge 110
/systems/electrical/sources/idg-1/output-volt le 130
/systems/electrical/sources/idg-1/gcu-1-fault ne 1 <!-- software trip -->
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/gen-1-glc/output">
<default value="0"/>
<test value="/systems/electrical/sources/idg-1/output-volt">
/systems/electrical/relay/gen-1-glc/contact-pos eq 1
</test>
</switch>
Electrical: GCU should be powered by PMG or by DC BAT bus. Therefore, you can control with GEN pb sw if you have PMG volts _or_ if you have DC BAT. Also, disc power is on DC BAT, not DC ESS, even though indication is on ESS. Typically weird Airbus
2020-10-13 23:32:24 +00:00
<switch name="/systems/electrical/sources/idg-2/gcu-2-powered">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/bus/dc-bat ge 25
/systems/electrical/sources/idg-2/pmg-volt ge 110
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
<switch name="/systems/electrical/sources/idg-2/gcu-2-voltage-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/idg-2/gcu-2-voltage-trip eq 1
/controls/electrical/switches/gen-2 eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/gen-2-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/idg-2/output-volt lt 110
/systems/electrical/sources/idg-2/output-volt gt 130
</test>
</test>
</switch>
<switch name="/systems/electrical/sources/idg-2/gcu-2-frequency-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/idg-2/gcu-2-frequency-trip eq 1
/controls/electrical/switches/gen-2 eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/gen-2-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/idg-2/output-hertz lt 363
/systems/electrical/sources/idg-2/output-hertz gt 433
</test>
</test>
</switch>
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<switch name="/systems/electrical/sources/idg-2/gcu-2-fault">
<default value="0"/>
<test logic="OR" value="0">
/systems/acconfig/autoconfig-running eq 1
/sim/time/elapsed-sec lt 10
</test>
<test logic="OR" value="1">
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
/systems/electrical/sources/idg-2/gcu-2-voltage-trip eq 1
/systems/electrical/sources/idg-2/gcu-2-frequency-trip eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/systems/electrical/sources/idg-2/drive-rpm lt 4730
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/gen-2-glc/contact-pos">
<default value="0"/>
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
<test logic="OR" value="0">
/sim/time/elapsed-sec lt 10
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
/controls/electrical/switches/gen-2 eq 1
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 12:51:30 +00:00
/systems/electrical/sources/idg-2/output-hertz ge 363
/systems/electrical/sources/idg-2/output-hertz le 433
/systems/electrical/sources/idg-2/output-volt ge 110
/systems/electrical/sources/idg-2/output-volt le 130
/systems/electrical/sources/idg-2/gcu-2-fault ne 1 <!-- software trip -->
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/gen-2-glc/output">
<default value="0"/>
<test value="/systems/electrical/sources/idg-2/output-volt">
/systems/electrical/relay/gen-2-glc/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ext-epc/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/ext/output-volt ge 110
/controls/electrical/switches/ext-pwr eq 1
/controls/electrical/ground-cart eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ext-epc/output">
<default value="0"/>
<test value="/systems/electrical/sources/ext/output-volt">
/systems/electrical/relay/ext-epc/contact-pos eq 1
</test>
</switch>
Same thing for APU
2020-10-14 14:08:29 +00:00
<switch name="/systems/electrical/sources/apu/gcu-powered">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/bus/dc-bat ge 25
/systems/electrical/sources/apu/pmg-volt ge 101.5
</test>
</switch>
<switch name="/systems/electrical/sources/apu/gcu-voltage-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/apu/gcu-voltage-trip eq 1
/controls/electrical/switches/apu eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/apu-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/apu/output-volt lt 101.5
/systems/electrical/sources/apu/output-volt gt 130
</test>
</test>
</switch>
<switch name="/systems/electrical/sources/apu/gcu-frequency-trip">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/apu/gcu-frequency-trip eq 1
/controls/electrical/switches/apu eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/relay/apu-glc/contact-pos eq 1
<test logic="OR">
/systems/electrical/sources/apu/output-hertz lt 361
/systems/electrical/sources/apu/output-hertz gt 435
</test>
</test>
</switch>
<switch name="/systems/electrical/sources/apu/gcu-fault">
<default value="0"/>
<test logic="OR" value="0">
/systems/acconfig/autoconfig-running eq 1
/sim/time/elapsed-sec lt 10
</test>
<test logic="OR" value="1">
/systems/electrical/sources/apu/gcu-voltage-trip eq 1
/systems/electrical/sources/apu/gcu-frequency-trip eq 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/apu-glc/contact-pos">
<default value="0"/>
Same thing for APU
2020-10-14 14:08:29 +00:00
<test logic="OR" value="0">
/sim/time/elapsed-sec lt 10
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="1">
JSBSim apu
2020-04-14 17:07:01 +00:00
/controls/apu/master eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/apu eq 1
Same thing for APU
2020-10-14 14:08:29 +00:00
/systems/electrical/sources/apu/output-volt ge 101.5
/systems/electrical/sources/apu/output-volt le 130
/systems/electrical/sources/apu/output-hertz ge 361
/systems/electrical/sources/apu/output-hertz le 435
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/ext-epc/contact-pos eq 0
Same thing for APU
2020-10-14 14:08:29 +00:00
/systems/electrical/sources/apu/gcu-fault ne 1 <!-- software trip -->
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/apu-glc/output">
<default value="0"/>
<test value="/systems/electrical/sources/apu/output-volt">
/systems/electrical/relay/apu-glc/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/emer-glc/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/emer-gen/output-volt ge 110
/systems/failures/electrical/emer-gen ne 1
/systems/electrical/relay/ac-ess-feed-1/output lt 110
/systems/electrical/relay/ac-ess-feed-2/output lt 110
</test>
</switch>
<switch name="/systems/electrical/relay/emer-glc/output">
<default value="0"/>
<test value="/systems/electrical/sources/emer-gen/output-volt">
/systems/electrical/relay/emer-glc/contact-pos eq 1
</test>
</switch>
<!-- AC Bus Tie AC Bus Relays -->
<!-- These outputs are from the AC Bus Tie to the AC Bus -->
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos">
<default value="0"/>
<test value="0">
/controls/electrical/switches/bus-tie eq 0
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<test logic="AND" value="1"> <!-- give power to other side -->
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/gen-1-glc/contact-pos eq 1
/systems/electrical/relay/gen-2-glc/contact-pos eq 0
/systems/electrical/relay/apu-glc/contact-pos eq 0
/systems/electrical/relay/ext-epc/contact-pos eq 0
/controls/electrical/switches/bus-tie eq 1
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<test logic="AND" value="1"> <!-- fetch power from other side -->
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/gen-1-glc/contact-pos eq 0
/systems/electrical/bus/ac-bus-tie ge 110
/controls/electrical/switches/bus-tie eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-1/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-bus-tie">
/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos">
<default value="0"/>
<test value="0">
/controls/electrical/switches/bus-tie eq 0
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<test logic="AND" value="1"> <!-- give power to other side -->
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/gen-2-glc/contact-pos eq 1
/systems/electrical/relay/gen-1-glc/contact-pos eq 0
/systems/electrical/relay/apu-glc/contact-pos eq 0
/systems/electrical/relay/ext-epc/contact-pos eq 0
/controls/electrical/switches/bus-tie eq 1
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<test logic="AND" value="1"> <!-- fetch power from other side -->
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/gen-2-glc/contact-pos eq 0
/systems/electrical/bus/ac-bus-tie ge 110
/controls/electrical/switches/bus-tie eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-2/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-bus-tie">
/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos eq 1
</test>
</switch>
<!-- AC ESS Relays -->
Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2
2020-10-14 14:32:58 +00:00
<switch name="/systems/electrical/relay/ac-ess-feed-1/auto-switch">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/bus/ac-1 lt 110
</test>
</switch>
<actuator name="/systems/electrical/relay/ac-ess-feed-1/auto-switch-timer">
<input>/systems/electrical/relay/ac-ess-feed-1/auto-switch</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.33333333333</rate_limit> <!-- 3 seconds -->
</actuator>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/ac-ess-feed-1/contact-pos"> <!-- TODO: via 1XC CB on 123VU -->
<default value="0"/>
<test logic="AND" value="1"> <!-- old AC ESS FEED supply mode -->
/controls/electrical/switches/ac-ess-feed eq 0
Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2
2020-10-14 14:32:58 +00:00
/systems/electrical/relay/ac-ess-feed-1/auto-switch-timer lt 1
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
/systems/electrical/relay/emer-glc/output lt 110
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-gen-test eq 0
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-1/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-1">
/systems/electrical/relay/ac-ess-feed-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-2/contact-pos"> <!-- TODO: via 2XC CB on 123VU -->
<default value="0"/>
<test logic="AND" value="1"> <!-- old AC ESS FEED supply mode -->
Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2
2020-10-14 14:32:58 +00:00
<test logic="OR">
/controls/electrical/switches/ac-ess-feed eq 1
/systems/electrical/relay/ac-ess-feed-1/auto-switch-timer eq 1
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
/systems/electrical/relay/emer-glc/output lt 110
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-gen-test eq 0
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-2/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-2">
/systems/electrical/relay/ac-ess-feed-2/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-emer-gen/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/bus/ac-1 eq 0
/systems/electrical/bus/ac-2 eq 0
/systems/electrical/relay/emer-glc/output ge 110
</test>
<test logic="AND" value="1">
/systems/electrical/bus/ac-1 ne 0
/systems/electrical/bus/ac-2 ne 0
/controls/electrical/switches/emer-gen-test eq 1
/systems/electrical/relay/emer-glc/output ge 110
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-emer-gen/output">
<default value="0"/>
<test value="/systems/electrical/relay/emer-glc/output">
/systems/electrical/relay/ac-ess-feed-emer-gen/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-inverter/contact-pos">
<default value="0"/>
Electrical: fix bug with the static inverter
2019-10-24 16:09:32 +00:00
<test logic="AND" value="1">
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/contactor-power-flow-to-ac-ess-contactor eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-feed-inverter/output">
<default value="0"/>
<test value="/systems/electrical/sources/si-1/output-volt">
/systems/electrical/relay/ac-ess-feed-inverter/contact-pos eq 1
</test>
</switch>
<!-- AC ESS Shedding -->
<switch name="/systems/electrical/relay/ac-ess-shed-switch/contact-pos">
<default value="1"/>
<test logic="OR" value="0"> <!-- TODO: confirm these conditions are for galley, NOT ESS -->
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-gen-test eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-ess-shed-switch/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-ess">
/systems/electrical/relay/ac-ess-shed-switch/contact-pos eq 1
</test>
</switch>
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<!-- Galleys -->
<fcs_function name="/systems/electrical/some-electric-thingie/galley-shed-sum">
<function>
<sum>
<property>/systems/electrical/relay/apu-glc/contact-pos</property>
<property>/systems/electrical/relay/ext-epc/contact-pos</property>
<property>/systems/electrical/relay/gen-1-glc/contact-pos</property>
<property>/systems/electrical/relay/gen-2-glc/contact-pos</property>
</sum>
</function>
</fcs_function>
Many bugfixes
2019-10-31 18:57:19 +00:00
<switch name="/systems/electrical/relay/galley-bus-1-shed-switch/contact-pos">
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<default value="0"/>
<test logic="AND" value="1">
Many bugfixes
2019-10-31 18:57:19 +00:00
/controls/electrical/switches/galley eq 1
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<test logic="OR">
<test logic="AND">
/gear/gear[1]/wow eq 0
/systems/electrical/some-electric-thingie/galley-shed-sum gt 1
</test>
<test logic="AND">
/gear/gear[1]/wow eq 1
<test logic="OR">
/systems/electrical/relay/apu-glc/output ge 110
/systems/electrical/relay/ext-epc/output ge 110
<test logic="AND">
/systems/electrical/relay/gen-1-glc/output ge 110
/systems/electrical/relay/gen-2-glc/output ge 110
</test>
</test>
</test>
Many bugfixes
2019-10-31 18:57:19 +00:00
</test>
</test>
</switch>
<switch name="/systems/electrical/relay/galley-bus-1-shed-switch/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-1">
/systems/electrical/relay/galley-bus-1-shed-switch/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/galley-bus-2-shed-switch/contact-pos">
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<default value="0"/>
<test logic="AND" value="1">
Many bugfixes
2019-10-31 18:57:19 +00:00
/controls/electrical/switches/galley eq 1
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<test logic="OR">
<test logic="AND">
/gear/gear[1]/wow eq 0
/systems/electrical/some-electric-thingie/galley-shed-sum gt 1
</test>
<test logic="AND">
/gear/gear[1]/wow eq 1
<test logic="OR">
/systems/electrical/relay/apu-glc/output ge 110
/systems/electrical/relay/ext-epc/output ge 110
<test logic="AND">
/systems/electrical/relay/gen-1-glc/output ge 110
/systems/electrical/relay/gen-2-glc/output ge 110
</test>
</test>
</test>
Many bugfixes
2019-10-31 18:57:19 +00:00
</test>
</test>
</switch>
<switch name="/systems/electrical/relay/galley-bus-2-shed-switch/output">
<default value="0"/>
<test value="/systems/electrical/bus/ac-2">
/systems/electrical/relay/galley-bus-2-shed-switch/contact-pos eq 1
</test>
</switch>
ELEC ECAM page: fix galley indications
2020-05-22 21:04:31 +00:00
<switch name="/systems/electrical/some-electric-thingie/galley-shed">
<default value="0"/>
<test logic="OR" value="1">
/systems/electrical/relay/galley-bus-1-shed-switch/contact-pos eq 0
/systems/electrical/relay/galley-bus-2-shed-switch/contact-pos eq 0
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<!-- AC Bus 1 -->
<switch name="/systems/electrical/bus/ac-1-src">
<description>Tell which source is being used for priority purpose</description>
<default value="0"/> <!-- OFF -->
<test value="1"> <!-- IDG1 -->
/systems/electrical/relay/gen-1-glc/contact-pos eq 1
</test>
<test value="2"> <!-- Bus Tie -->
/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos eq 1
</test>
</switch>
<fcs_function name="/systems/electrical/bus/ac-1">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/ac-1-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/gen-1-glc/output</property>
<property>/systems/electrical/relay/ac-bus-ac-bus-tie-1/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
<!-- AC Bus 2 -->
<switch name="/systems/electrical/bus/ac-2-src">
<description>Tell which source is being used for priority purpose</description>
<default value="0"/> <!-- OFF -->
<test value="1"> <!-- IDG2 -->
/systems/electrical/relay/gen-2-glc/contact-pos eq 1
</test>
<test value="2"> <!-- Bus Tie -->
/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos eq 1
</test>
</switch>
<fcs_function name="/systems/electrical/bus/ac-2">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/ac-2-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/gen-2-glc/output</property>
<property>/systems/electrical/relay/ac-bus-ac-bus-tie-2/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
<pure_gain name="/systems/electrical/bus/ac-1-26v"> <!-- TODO: via 5XN1 CB on 123VU, supplies ADIRS -->
<input>/systems/electrical/bus/ac-1</input>
<gain>0.2260869565</gain>
</pure_gain>
<pure_gain name="/systems/electrical/bus/ac-2-26v"> <!-- TODO: via 5XN2 CB on 123VU, supplies ADIRS -->
<input>/systems/electrical/bus/ac-2</input>
<gain>0.2260869565</gain>
</pure_gain>
<pure_gain name="/systems/electrical/bus/ac-ess-26v"> <!-- TODO: via 4XH CB on 106VU -->
<input>/systems/electrical/bus/ac-ess</input>
<gain>0.2260869565</gain>
</pure_gain>
<pure_gain name="/systems/electrical/bus/ac-si-bus"> <!-- feeds landing gear indication, apu fuel pump, some annunciators, a injectors if RAT is out, only if stat inv is on -->
<input>/systems/electrical/sources/si-1/output-volt</input> <!-- TODO: via 12XB CB on 105VU -->
<gain>1</gain>
</pure_gain>
<fcs_function name="/systems/electrical/bus/ac-ess">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/ac-ess-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/ac-ess-feed-1/output</property>
<property>/systems/electrical/relay/ac-ess-feed-2/output</property>
<property>/systems/electrical/relay/ac-ess-feed-emer-gen/output</property>
<property>/systems/electrical/relay/ac-ess-feed-inverter/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
<pure_gain name="/systems/electrical/bus/ac-ess-shed">
<input>/systems/electrical/relay/ac-ess-shed-switch/output</input>
<gain>/systems/electrical/relay/ac-ess-shed-switch/contact-pos</gain>
</pure_gain>
<!-- AC Bus Tie AC Bus Relays (continued) -->
<!-- These outputs are from the AC Bus to the AC Bus Tie -->
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-1/output-tie">
<default value="0"/>
<test value="/systems/electrical/bus/ac-1">
/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ac-bus-ac-bus-tie-2/output-tie">
<default value="0"/>
<test value="/systems/electrical/bus/ac-2">
/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos eq 1
</test>
</switch>
<!-- AC Bus Tie -->
<switch name="/systems/electrical/bus/ac-bus-tie">
<default value="0"/>
<test value="/systems/electrical/relay/ext-epc/output">
/systems/electrical/relay/ext-epc/contact-pos eq 1
</test>
<test value="/systems/electrical/relay/apu-glc/output">
/systems/electrical/relay/apu-glc/contact-pos eq 1
</test>
<test logic="AND" value="/systems/electrical/relay/ac-bus-ac-bus-tie-1/output-tie">
/systems/electrical/relay/ac-bus-ac-bus-tie-1/contact-pos eq 1
/systems/electrical/bus/ac-1-src ne 2
</test>
<test logic="AND" value="/systems/electrical/relay/ac-bus-ac-bus-tie-2/output-tie">
/systems/electrical/relay/ac-bus-ac-bus-tie-2/contact-pos eq 1
/systems/electrical/bus/ac-2-src ne 2
</test>
</switch>
<!-- Transformer Rectifiers -->
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<switch name="/systems/electrical/sources/tr-1/working">
<default value="0"/>
<test logic="OR" value="0.24347826086956523">
/systems/failures/electrical/tr-1 ne 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<pure_gain name="/systems/electrical/sources/tr-1/output-volt">
<input>/systems/electrical/bus/ac-1</input> <!-- TODO: via 2PU1 CB -->
<gain>0.24347826086956523</gain> <!-- AC to DC converter -->
</pure_gain>
<fcs_function name="/systems/electrical/sources/tr-1/output-amp"> <!-- TODO: make it depend on current draw -->
<function>
<table>
<independentVar lookup="row">/systems/electrical/sources/tr-1/output-volt</independentVar>
<tableData>
0 0
27.5 200
</tableData>
</table>
</function>
</fcs_function>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<switch name="/systems/electrical/sources/tr-2/working">
<default value="0"/>
<test logic="OR" value="0.24347826086956523">
/systems/failures/electrical/tr-2 ne 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<pure_gain name="/systems/electrical/sources/tr-2/output-volt">
<input>/systems/electrical/bus/ac-2</input> <!-- TODO: via 2PU2 CB -->
<gain>0.24347826086956523</gain> <!-- AC to DC converter -->
</pure_gain>
<fcs_function name="/systems/electrical/sources/tr-2/output-amp"> <!-- TODO: make it depend on current draw -->
<function>
<table>
<independentVar lookup="row">/systems/electrical/sources/tr-2/output-volt</independentVar>
<tableData>
0 0
27.5 200
</tableData>
</table>
</function>
</fcs_function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<switch name="/systems/electrical/sources/ess-tr/working">
<default value="0"/>
<test value="0.24347826086956523">
/systems/failures/electrical/ess-tr eq 0
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<pure_gain name="/systems/electrical/sources/ess-tr/output-volt">
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<input>/systems/electrical/bus/ac-ess</input> <!-- TODO: via 15XE CB -->
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<gain>/systems/electrical/sources/ess-tr/working</gain> <!-- AC to DC converter -->
A320-family fork
2019-10-14 16:48:35 +00:00
</pure_gain>
<fcs_function name="/systems/electrical/sources/ess-tr/output-amp"> <!-- TODO: make it depend on current draw -->
<function>
<table>
<independentVar lookup="row">/systems/electrical/sources/ess-tr/output-volt</independentVar>
<tableData>
0 0
27.5 200
</tableData>
</table>
</function>
</fcs_function>
<!-- Transformer Rectifier Contactors (Relays) -->
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<switch name="/systems/electrical/relay/tr-contactor-1/fault">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/tr-contactor-1/fault eq 1
/systems/electrical/bus/ac-1 ge 110
</test>
<test logic="AND" value="1">
<test logic="OR">
/systems/electrical/sources/tr-1/output-volt lt 25
/systems/electrical/sources/tr-1/output-amp eq 0
</test>
/systems/electrical/bus/ac-1 ge 110
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/tr-contactor-1/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
/systems/electrical/relay/tr-contactor-1/fault eq 0
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/tr-contactor-1/output">
<default value="0"/>
<test value="/systems/electrical/sources/tr-1/output-volt">
/systems/electrical/relay/tr-contactor-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/tr-contactor-1/output-amp">
<default value="0"/>
<test value="/systems/electrical/sources/tr-1/output-amp">
/systems/electrical/relay/tr-contactor-1/contact-pos eq 1
</test>
</switch>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<switch name="/systems/electrical/relay/tr-contactor-2/fault">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/tr-contactor-2/fault eq 1
/systems/electrical/bus/ac-2 ge 110
</test>
<test logic="AND" value="1">
<test logic="OR">
/systems/electrical/sources/tr-2/output-volt lt 25
/systems/electrical/sources/tr-2/output-amp eq 0
</test>
/systems/electrical/bus/ac-2 ge 110
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/tr-contactor-2/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
/systems/electrical/relay/tr-contactor-2/fault eq 0
<!-- ground service NE 1 -->
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/tr-contactor-2/output">
<default value="0"/>
<test value="/systems/electrical/sources/tr-2/output-volt">
/systems/electrical/relay/tr-contactor-2/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/tr-contactor-2/output-amp">
<default value="0"/>
<test value="/systems/electrical/sources/tr-2/output-amp">
/systems/electrical/relay/tr-contactor-2/contact-pos eq 1
</test>
</switch>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<switch name="/systems/electrical/relay/ess-tr-contactor/fault">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/ess-tr-contactor/fault eq 1
<test logic="OR">
/systems/electrical/bus/ac-ess ge 110
/systems/electrical/relay/emer-glc/output ge 110
</test>
</test>
<test logic="AND" value="1">
<test logic="OR">
/systems/electrical/sources/ess-tr/output-volt lt 25
/systems/electrical/sources/ess-tr/output-amp eq 0
</test>
<test logic="OR">
/systems/electrical/bus/ac-ess ge 110
/systems/electrical/relay/emer-glc/output ge 110
</test>
</test>
</switch>
<switch name="/systems/electrical/relay/ess-tr-contactor/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/ess-tr-contactor/fault eq 0
</test>
</switch>
<switch name="/systems/electrical/relay/ess-tr-contactor/output">
<default value="0"/>
<test value="/systems/electrical/sources/ess-tr/output-volt">
/systems/electrical/relay/ess-tr-contactor/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/ess-tr-contactor/output-amp">
<default value="0"/>
<test value="/systems/electrical/sources/ess-tr/output-amp">
/systems/electrical/relay/ess-tr-contactor/contact-pos eq 1
</test>
</switch>
Fix references to ac1 / ac2 bus
2019-10-16 18:33:44 +00:00
<!-- DC Bus Tie Relays -->
<switch name="/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/bus/ac-1 ge 110
/systems/electrical/bus/dc-1 ge 25
/systems/electrical/relay/tr-contactor-1/contact-pos eq 1
</test>
<test logic="AND" value="1">
/systems/electrical/bus/dc-bat ge 25
/systems/electrical/bus/dc-bat-src ne 3
<test logic="OR">
/systems/electrical/relay/tr-contactor-1/contact-pos eq 0
/systems/electrical/relay/tr-contactor-2/contact-pos eq 0
</test>
</test>
</switch>
<switch name="/systems/electrical/relay/dc-bus-tie-dc-1/output">
<default value="0"/>
<test logic="AND" value="/systems/electrical/bus/dc-bat">
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/dc-ess-feed-bat/contact-pos eq 0
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 0
/systems/electrical/relay/tr-contactor-2/contact-pos eq 1
/systems/electrical/bus/dc-2 ge 25
</test>
<test logic="AND" value="1">
/systems/electrical/bus/dc-bat ge 25
/systems/electrical/bus/dc-bat-src ne 3
<test logic="OR">
/systems/electrical/relay/tr-contactor-1/contact-pos eq 0
/systems/electrical/relay/tr-contactor-2/contact-pos eq 0
</test>
</test>
</switch>
<switch name="/systems/electrical/relay/dc-bus-tie-dc-2/output">
<default value="0"/>
<test logic="AND" value="/systems/electrical/bus/dc-bat">
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<!-- DC ESS Relays -->
<switch name="/systems/electrical/relay/dc-ess-feed-tr/contact-pos"> <!-- TODO: supply via 4PE CB on 106VU, contactor via 5PE on 106VU -->
<default value="0"/>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<test logic="AND" value="1">
<test logic="OR">
/systems/electrical/relay/tr-contactor-1/output lt 25
/systems/electrical/relay/tr-contactor-2/output lt 25
/systems/electrical/relay/emer-glc/output ge 110
</test>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
/systems/electrical/relay/ess-tr-contactor/output ge 25
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/relay/dc-ess-feed-tr/output">
<default value="0"/>
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<test value="/systems/electrical/relay/ess-tr-contactor/output">
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/dc-ess-feed-tr/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-ess-feed-tr/output-amp">
<default value="0"/>
<test value="/systems/electrical/sources/ess-tr/output-amp">
/systems/electrical/relay/dc-ess-feed-tr/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-ess-feed-bat/contact-pos"> <!-- TODO: via 20PC1 80A fuse on 120VU -->
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/relay/dc-ess-feed-tr/contact-pos eq 0
Correction to electrical power on batteries only on the ground
2020-07-26 16:56:09 +00:00
<test logic="OR">
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 0
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 0
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-gen-test eq 0
</test>
</switch>
<switch name="/systems/electrical/relay/dc-ess-feed-bat/output">
<default value="0"/>
<test value="/systems/electrical/bus/dc-bat">
/systems/electrical/relay/dc-ess-feed-bat/contact-pos eq 1
</test>
</switch>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<switch name="/systems/electrical/relay/dc-ess-feed-inv/contact-pos">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-ess-feed-inv/output">
<default value="0"/>
<test value="/systems/electrical/bus/dc-hot-2">
/systems/electrical/relay/dc-ess-feed-inv/contact-pos eq 1
</test>
</switch>
Fix failures in the electrical system - generator / TR failure handled now
2019-10-16 18:18:50 +00:00
<!-- DC Ess Shedding -->
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/relay/dc-ess-shed-switch/contact-pos">
<default value="1"/>
<test logic="OR" value="0"> <!-- TODO: confirm these conditions are for galley, NOT ESS -->
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
/systems/electrical/sources/si-1/inverter-control/relay-2xb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/emer-gen-test eq 1
</test>
</switch>
Many bugfixes
2019-10-31 18:57:19 +00:00
<!-- DC Service Bus -->
<switch name="/systems/electrical/relay/dc-svc-bus-contactor-tr/contact-pos"> <!-- TODO: via 1PX CB on 124VU -->
<default value="0"/>
</switch>
<switch name="/systems/electrical/relay/dc-svc-bus-contactor-tr/output">
<default value="0"/>
<test value="/systems/electrical/relay/tr-contactor-2/output">
/systems/electrical/relay/dc-svc-bus-contactor-tr/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-svc-bus-contactor-bus-2/contact-pos"> <!-- TODO: via 7PN CB on 124VU -->
<default value="1"/>
</switch>
<switch name="/systems/electrical/relay/dc-svc-bus-contactor-bus-2/output">
<default value="0"/>
<test value="/systems/electrical/bus/dc-2">
/systems/electrical/relay/dc-svc-bus-contactor-bus-2/contact-pos eq 1
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<!-- DC Bus 1 -->
<switch name="/systems/electrical/bus/dc-1-src">
<description>Tell which source is being used for priority purpose</description>
<default value="0"/> <!-- OFF -->
<test value="1"> <!-- TR1 -->
/systems/electrical/relay/tr-contactor-1/output ge 25
</test>
<test value="2"> <!-- DC BAT -->
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 1
</test>
</switch>
<fcs_function name="/systems/electrical/bus/dc-1">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/dc-1-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/tr-contactor-1/output</property>
<property>/systems/electrical/relay/dc-bus-tie-dc-1/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
<!-- DC Bus 2 -->
<switch name="/systems/electrical/bus/dc-2-src">
<description>Tell which source is being used for priority purpose</description>
<default value="0"/> <!-- OFF -->
<test value="1"> <!-- TR1 -->
/systems/electrical/relay/tr-contactor-2/output ge 25
</test>
<test value="2"> <!-- DC BAT -->
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 1
</test>
</switch>
<fcs_function name="/systems/electrical/bus/dc-2">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/dc-2-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/tr-contactor-2/output</property>
<property>/systems/electrical/relay/dc-bus-tie-dc-2/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
Many bugfixes
2019-10-31 18:57:19 +00:00
<fcs_function name="/systems/electrical/bus/dc-service-bus">
<function>
<max>
<property>/systems/electrical/relay/dc-svc-bus-contactor-tr/output</property>
<property>/systems/electrical/relay/dc-svc-bus-contactor-bus-2/output</property>
</max>
</function>
</fcs_function>
A320-family fork
2019-10-14 16:48:35 +00:00
<!-- DC Bus Tie DC Bus Relays (continued) -->
<!-- These outputs are from the DC Bus to the DC Bus Tie -->
<switch name="/systems/electrical/relay/dc-bus-tie-dc-1/output-tie">
<default value="0"/>
<test value="/systems/electrical/bus/dc-1">
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 1
</test>
</switch>
<switch name="/systems/electrical/relay/dc-bus-tie-dc-2/output-tie">
<default value="0"/>
<test value="/systems/electrical/bus/dc-2">
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 1
</test>
</switch>
<!-- DC Bat Bus -->
Electrical: fix DC BAT
2019-10-15 19:24:51 +00:00
<switch name="/systems/electrical/bus/dc-bat-src">
<description>Tell which source is being used for priority purpose</description>
<default value="0"/> <!-- OFF -->
<test value="1"> <!-- DC1 -->
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 1
/systems/electrical/bus/dc-1-src ne 2
</test>
<test value="2"> <!-- DC2 -->
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 1
/systems/electrical/bus/dc-2-src ne 2
</test>
JSBSim apu
2020-04-14 17:07:01 +00:00
<test logic="OR" value="3"> <!-- BAT -->
<test logic="AND">
Correction to electrical power on batteries only on the ground
2020-07-26 16:56:09 +00:00
/instrumentation/airspeed-indicator/indicated-speed-kt lt 100
JSBSim apu
2020-04-14 17:07:01 +00:00
<test logic="OR">
/controls/electrical/switches/bat-1 eq 1
/controls/electrical/switches/bat-2 eq 1
</test>
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
</test>
<test logic="AND">
<test logic="OR">
/controls/electrical/switches/bat-1 eq 1
/controls/electrical/switches/bat-2 eq 1
</test>
/systems/apu/dc-bat-three-minutes eq 1
Electrical: fix DC BAT
2019-10-15 19:24:51 +00:00
</test>
</test>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
<switch name="/systems/electrical/bus/dc-bat">
<default value="0"/>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<test value="0">
/systems/failures/electrical/dc-bat-bus eq 1
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
<test logic="AND" value="/systems/electrical/relay/dc-bus-tie-dc-1/output-tie">
/systems/electrical/relay/dc-bus-tie-dc-1/contact-pos eq 1
/systems/electrical/bus/dc-1-src ne 2
</test>
<test logic="AND" value="/systems/electrical/relay/dc-bus-tie-dc-2/output-tie">
/systems/electrical/relay/dc-bus-tie-dc-2/contact-pos eq 1
/systems/electrical/bus/dc-2-src ne 2
</test>
JSBSim apu
2020-04-14 17:07:01 +00:00
<test logic="OR" value="/systems/electrical/sources/bat-1/volt">
<test logic="AND">
Correction to electrical power on batteries only on the ground
2020-07-26 16:56:09 +00:00
/instrumentation/airspeed-indicator/indicated-speed-kt lt 100
JSBSim apu
2020-04-14 17:07:01 +00:00
/controls/electrical/switches/bat-1 eq 1
/systems/electrical/bus/dc-bat-src eq 3
/systems/electrical/sources/bat-1/volt ge 25
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
</test>
<test logic="AND">
/systems/apu/dc-bat-three-minutes eq 1
/controls/electrical/switches/bat-1 eq 1
/systems/electrical/bus/dc-bat-src eq 3
/systems/electrical/sources/bat-1/volt ge 25
</test>
Electrical: fix DC BAT
2019-10-15 19:24:51 +00:00
</test>
JSBSim apu
2020-04-14 17:07:01 +00:00
<test logic="OR" value="/systems/electrical/sources/bat-2/volt">
<test logic="AND">
Correction to electrical power on batteries only on the ground
2020-07-26 16:56:09 +00:00
/instrumentation/airspeed-indicator/indicated-speed-kt lt 100
JSBSim apu
2020-04-14 17:07:01 +00:00
/controls/electrical/switches/bat-2 eq 1
/systems/electrical/bus/dc-bat-src eq 3
/systems/electrical/sources/bat-2/volt ge 25
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
</test>
<test logic="AND">
/systems/apu/dc-bat-three-minutes eq 1
/controls/electrical/switches/bat-2 eq 1
/systems/electrical/bus/dc-bat-src eq 3
/systems/electrical/sources/bat-2/volt ge 25
</test>
Electrical: fix DC BAT
2019-10-15 19:24:51 +00:00
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
</switch>
<!-- DC ESS Bus -->
<fcs_function name="/systems/electrical/bus/dc-ess">
<function>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<ifthen>
<eq>
<property>/systems/failures/electrical/dc-ess-bus</property>
<value>1</value>
</eq>
<value>0</value>
<max>
<property>/systems/electrical/relay/dc-ess-feed-bat/output</property>
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 20:18:40 +00:00
<property>/systems/electrical/relay/dc-ess-feed-inv/output</property>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<property>/systems/electrical/relay/dc-ess-feed-tr/output</property>
</max>
</ifthen>
A320-family fork
2019-10-14 16:48:35 +00:00
</function>
</fcs_function>
<pure_gain name="/systems/electrical/bus/dc-ess-shed">
<input>/systems/electrical/bus/dc-ess</input>
Fix that DC ESS SHED is powered when it shouldn't
2020-10-19 20:45:08 +00:00
<gain>/systems/electrical/relay/dc-ess-shed-switch/contact-pos</gain>
A320-family fork
2019-10-14 16:48:35 +00:00
</pure_gain>
<!-- Hot Buses -->
<pure_gain name="/systems/electrical/bus/dc-hot-1">
New battery charging logic
2020-05-03 16:13:49 +00:00
<input>/systems/electrical/sources/bat-1/volt</input> <!-- todo CB 12PB1 / 5PB1 -->
A320-family fork
2019-10-14 16:48:35 +00:00
<gain>1.0</gain>
</pure_gain>
<pure_gain name="/systems/electrical/bus/dc-hot-2">
New battery charging logic
2020-05-03 16:13:49 +00:00
<input>/systems/electrical/sources/bat-2/volt</input> <!-- todo CB 12PB2 / 5PB2 -->
A320-family fork
2019-10-14 16:48:35 +00:00
<gain>1.0</gain>
</pure_gain>
<switch name="/systems/electrical/some-electric-thingie/emer-elec-config">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/bus/ac-1 lt 110
/systems/electrical/bus/ac-2 lt 110
</test>
<test logic="AND" value="1">
/systems/electrical/relay/ext-epc/contact-pos eq 0
<test logic="OR">
/controls/electrical/switches/gen-1 eq 0
/systems/failures/electrical/gen-1 eq 1
</test>
<test logic="OR">
/controls/electrical/switches/gen-2 eq 0
/systems/failures/electrical/gen-2 eq 1
</test>
<test logic="OR">
/controls/electrical/switches/apu eq 0
/systems/failures/electrical/apu eq 1
Fix ref to old prop, remove old apu system, acconfig
2020-04-17 22:41:36 +00:00
/engines/engine[2]/n1 lt 94.9
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</test>
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-elec-config-generator-1-bustie">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
ECAM: fix the EMER ELEC message, move autothrust warnings to correct priority
2019-12-28 17:35:06 +00:00
/systems/electrical/some-electric-thingie/generator-1-pb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/bus-tie eq 0
</test>
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-elec-config-generator-2-bustie">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
ECAM: fix the EMER ELEC message, move autothrust warnings to correct priority
2019-12-28 17:35:06 +00:00
/systems/electrical/some-electric-thingie/generator-2-pb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
/controls/electrical/switches/bus-tie eq 0
</test>
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-elec-config-generator-1">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
ECAM: fix the EMER ELEC message, move autothrust warnings to correct priority
2019-12-28 17:35:06 +00:00
/systems/electrical/some-electric-thingie/generator-1-pb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/some-electric-thingie/emer-elec-config-generator-2">
<default value="0"/>
<test logic="AND" value="1">
/systems/electrical/some-electric-thingie/emer-elec-config eq 1
ECAM: fix the EMER ELEC message, move autothrust warnings to correct priority
2019-12-28 17:35:06 +00:00
/systems/electrical/some-electric-thingie/generator-2-pb eq 1
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<actuator name="/systems/electrical/some-electric-thingie/static-inverter-timer">
TR failure, latch TR fault, verify AC ESS feed, fix ESS BUS ON BAT warning
2020-10-19 23:49:41 +00:00
<input>/systems/electrical/sources/si-1/inverter-control/relay-2xb</input>
A320-family fork
2019-10-14 16:48:35 +00:00
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.1</rate_limit> <!-- 10 seconds -->
</actuator>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<!-- Output to Generics to keep FG things working, temporary, until we know what gets power by what bus -->
<switch name="/systems/electrical/generic-pwr">
<description>This makes the FG stuff work because we killed the generic electrical</description>
<default value="0"/>
<test value="/systems/electrical/bus/dc-1">
/systems/electrical/bus/dc-1 ge 25
</test>
<test value="/systems/electrical/bus/dc-2">
/systems/electrical/bus/dc-2 ge 25
</test>
Radar altimeter, ADR / IR panel hooked up
2019-11-04 19:20:56 +00:00
<!--<output>/systems/electrical/outputs/adf</output>
<output>/systems/electrical/outputs/dme</output>-->
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<output>/systems/electrical/outputs/efis</output>
<output>/systems/electrical/outputs/fcp-power</output>
<output>/systems/electrical/outputs/fuel-pump[0]</output>
<output>/systems/electrical/outputs/fuel-pump[1]</output>
<output>/systems/electrical/outputs/fuel-pump[2]</output>
<output>/systems/electrical/outputs/gps</output>
<output>/systems/electrical/outputs/mk-viii</output>
Radar altimeter, ADR / IR panel hooked up
2019-11-04 19:20:56 +00:00
<!--<output>/systems/electrical/outputs/nav[0]</output>
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<output>/systems/electrical/outputs/nav[1]</output>
<output>/systems/electrical/outputs/nav[2]</output>
Radar altimeter, ADR / IR panel hooked up
2019-11-04 19:20:56 +00:00
<output>/systems/electrical/outputs/nav[3]</output>-->
Electrical: failures, generic outputs, fix logic
2019-10-17 19:40:13 +00:00
<output>/systems/electrical/outputs/tacan</output>
<output>/systems/electrical/outputs/turn-coordinator</output>
</switch>
A320-family fork
2019-10-14 16:48:35 +00:00
</channel>
<!-- Notes -->
<!-- Priority: eng, ext, apu but EXT ON lt stays on even when not feeding a/c -->
<!-- TR 2 fail leads to loss of gnd FLT bus -->
<channel name="Overhead Lights" execrate="8">
<switch name="/systems/electrical/light/ac-ess-feed-fault">
<default value="0"/>
<test value="1">
/systems/electrical/bus/ac-ess lt 110
</test>
</switch>
Fix APU FAULT light
2020-01-02 22:07:21 +00:00
<switch name="/systems/electrical/light/apu-fault">
A320-family fork
2019-10-14 16:48:35 +00:00
<default value="0"/>
<test logic="AND" value="1">
/controls/electrical/switches/apu eq 1
Same thing for APU
2020-10-14 14:08:29 +00:00
<test logic="OR">
/systems/electrical/sources/apu/gcu-fault eq 1
<test logic="AND">
/systems/electrical/relay/apu-glc/contact-pos eq 0
/systems/electrical/relay/ext-epc/contact-pos eq 0
/systems/electrical/relay/gen-1-glc/contact-pos eq 0
/systems/electrical/relay/gen-2-glc/contact-pos eq 0
</test>
</test>
/systems/electrical/sources/apu/drive-rpm gt 22800
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/light/bat-1-fault">
<default value="0"/>
<test value="1"> <!-- TODO: depends charging current -->
/systems/failures/electrical/bat-1 eq 1
</test>
</switch>
<switch name="/systems/electrical/light/bat-2-fault">
<default value="0"/>
<test value="1"> <!-- TODO: depends charging current -->
/systems/failures/electrical/bat-2 eq 1
</test>
</switch>
<!-- TODO: galley fault when load > 100 -->
<switch name="/systems/electrical/light/galley-fault">
<default value="0"/>
</switch>
<switch name="/systems/electrical/light/gen-1-fault">
<default value="0"/>
<test value="1">
/controls/electrical/switches/gen-1 eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<test logic="OR">
/systems/electrical/sources/idg-1/gcu-1-fault eq 1
/systems/electrical/relay/gen-1-glc/contact-pos eq 0
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/light/gen-2-fault">
<default value="0"/>
<test value="1">
/controls/electrical/switches/gen-2 eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
<test logic="OR">
/systems/electrical/sources/idg-2/gcu-2-fault eq 1
/systems/electrical/relay/gen-2-glc/contact-pos eq 0
</test>
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
</switch>
<switch name="/systems/electrical/light/idg-1-fault">
<default value="0"/>
<test logic="AND" value="1">
/systems/failures/electrical/idg-1 eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/systems/electrical/sources/idg-1/drive-rpm gt 2000
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
<test logic="AND" value="1">
/controls/electrical/switches/idg-1-disc-momentary eq 1
</test>
</switch>
<switch name="/systems/electrical/light/idg-2-fault">
<default value="0"/>
<test logic="AND" value="1">
/systems/failures/electrical/idg-2 eq 1
IDG improvements: 1) restrict disconnection with underspeed condition (14%) 2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero. 3) Generator comes online at 52% N2 (4730 RPM) 4) Wider range of acceptable frequencies per AMM 5) Gen faults latch -- allows for potential restoration upon reset of the generator switch 6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 22:19:06 +00:00
/systems/electrical/sources/idg-2/drive-rpm gt 2000
A320-family fork
2019-10-14 16:48:35 +00:00
</test>
<test logic="AND" value="1">
/controls/electrical/switches/idg-2-disc-momentary eq 1
</test>
</switch>
<switch name="/systems/electrical/light/rat-emer-gen-fault">
<default value="0"/>
Bugfix FCU, RAT MAN light, and ECAM autopilot message
2020-01-01 21:30:13 +00:00
<test logic="AND" value="1">
A320-family fork
2019-10-14 16:48:35 +00:00
/systems/electrical/relay/dc-ess-feed-tr/output eq 0
/systems/electrical/bus/ac-1 eq 0
/systems/electrical/bus/ac-2 eq 0
position/wow eq 0
</test>
</switch>
</channel>
Many bugfixes
2019-10-31 18:57:19 +00:00
A320-family fork
2019-10-14 16:48:35 +00:00
</system>
Copy permalink